Skip to main content

Aplicom - T10 G Features

This page provides a public feature overview for the Aplicom T10 G and how its capabilities are used with Plaspy for fleet tracking, vehicle telemetry, and operational visibility. It focuses on non-sensitive, user-facing information about what the device can deliver and how those capabilities appear in Plaspy workflows.

Exact feature availability and behavior depend on device firmware, hardware revision, optional variants, installation method, and manufacturer implementation. For device level specifics such as supported bands, GNSS options, and CAN signal mappings consult the official Aplicom documentation and product datasheets.

Feature Overview​

The Aplicom T10 G is a rugged vehicle tracker designed to deliver continuous location reporting and vehicle-bus telemetry to cloud platforms like Plaspy. It is purpose built for fleet deployments that require durable hardware, remote device management, and the ability to integrate CAN bus data into tracking and reporting workflows.

  • Real-time location reporting where GNSS is enabled on the device variant for route visibility and tracking.
  • Built-in CAN bus access to capture vehicle-bus signals such as ignition state and diagnostic messages when available on the vehicle.
  • Rugged IP67 enclosure and plug-and-play installation for reliable operation in demanding vehicle and industrial environments.
  • Cellular resilience using LTE Cat M1 with global 4G roaming plus 2G fallback for broader coverage across regions.
  • Remote provisioning and lifecycle management through Aplicom Silver Cloud to simplify deployment and firmware updates.

Core Features of Aplicom - T10 G​

  • Plaspy compatibility for streaming location and CAN-derived telemetry into Plaspy dashboards and reports.
  • Built-in CAN interface to read vehicle-bus signals when present on the connected vehicle.
  • Rugged IP67 rated enclosure suited for vehicle and asset mounting in harsh conditions.
  • LTE Cat M1 connectivity with global 4G roaming and 2G fallback for improved regional coverage.
  • Plug-and-play installation to reduce installation time and simplify fleet rollouts.
  • Remote device management via Aplicom Silver Cloud for provisioning, configuration and firmware handling.
  • GNSS based location reporting available on applicable device variants.
  • Starter kit and a 2G variant option for testing and deployments in legacy network areas.

How These Features Work with Plaspy​

When deployed with Plaspy, the T10 G streams location and CAN-derived telemetry into Plaspy workflows so operators can monitor vehicles, view key bus signals, and include vehicle-level data in reports and alerts. Plaspy detects compatible trackers automatically and ingests telemetry for use in tracking interfaces and operational dashboards.

  • Location updates appear in Plaspy maps and history views for live tracking and trip analysis.
  • CAN-derived signals such as ignition state and diagnostic messages are reflected as telemetry fields when provided by the device and vehicle bus.
  • Remote provisioning via Aplicom Silver Cloud helps accelerate onboarding so devices start reporting to Plaspy with minimal manual configuration.
  • Cellular resilience of the device helps maintain continuity of telemetry and location feeds into Plaspy across variable coverage areas.
  • Starter kit support allows pilot testing and verification of data flow into Plaspy before full scale rollouts.

Typical Use Cases​

  • Centralized fleet management with continuous location visibility and vehicle-level telemetry.
  • Anti-theft and security workflows that leverage ignition state and location feeds for unauthorized movement detection.
  • Preventive maintenance programs that incorporate CAN-derived diagnostic messages into service planning.
  • Cross-border and roaming fleets that benefit from LTE Cat M1 plus 2G fallback for broader coverage.
  • Pilot deployments and phased rollouts using starter kits and 2G variants to validate compatibility with Plaspy.
  • Trailer and asset monitoring where rugged enclosure and remote management are important.

Feature Availability Notes​

  • CAN bus signals and specific parameters available from the T10 G depend on the vehicle bus and how signals are exposed by each vehicle make and model.
  • GNSS location reporting and cellular band support can vary by T10 G variant; consult the Aplicom datasheet for variant specific details.
  • Firmware revision and hardware revision can change available functionality and signal mappings over time.
  • Remote provisioning features require integration with Aplicom Silver Cloud and appropriate configuration to forward telemetry to Plaspy.
  • Starter kit contents and 2G variant availability may differ by region and supplier channel.

Why Use Plaspy with These Features​

Pairing the Aplicom T10 G with Plaspy gives organizations a practical path to combine rugged, vehicle mounted hardware with a fleet management platform that surfaces location and vehicle-bus telemetry. This combination helps fleet operators turn vehicle-level signals and continuous location updates into operational insight, reports, and alerting without extensive custom integration work.

To learn more about how Plaspy can use telemetry from devices like the Aplicom T10 G visit https://www.plaspy.com. For the most current and detailed device specifications, firmware notes, and variant information consult the official Aplicom product documentation at https://www.aplicom.com/ as manufacturer features and firmware behavior can change over time.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy