Skip to main content

Arusnavi - Arnavi L2 (cigarette lighter) Features

This page provides a public feature overview for the Arusnavi Arnavi L2 cigarette lighter GPS tracker and describes how those features can be used with the Plaspy platform. It focuses on user facing capabilities, practical operational value, and the typical ways the device reports location and sensor data into Plaspy for fleet monitoring and reporting.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation type, and manufacturer implementation. Always check the device firmware and the official manufacturer documentation for the most current, device specific details before deployment.

Feature Overview​

The Arnavi L2 is a compact, plug and play GPS tracker designed for quick installation via a vehicle cigarette lighter socket and portable telematics use. It provides real time tracking, multi GNSS location, BLE sensor support and buffered local storage to maintain data continuity during temporary network loss.

  • Plug in via cigarette lighter socket for fast, non invasive installation and easy transfer between vehicles.
  • Real time tracking using GSM 2G GPRS combined with multi GNSS positioning for reliable location updates.
  • Bluetooth Low Energy support for up to five wireless sensors to extend telemetry beyond basic location.
  • Discrete ignition input and a protected universal I O for engine status detection and remote control scenarios.
  • Local black box storage to capture records offline and upload them to Plaspy when connectivity returns.

Core Features of Arusnavi - Arnavi L2 (cigarette lighter)​

  • Plug and play cigarette lighter installation for rapid deployment and removal without hardwiring.
  • Cellular 2G GPRS connectivity for continuous reporting to telematics platforms.
  • Multi GNSS support including GPS GLONASS Galileo BeiDou and QZSS for improved positioning.
  • Bluetooth Low Energy support for up to five external sensors for telemetry such as temperature or guard tags.
  • Discrete positive ignition input for engine on off detection and driver session tracking.
  • Protected universal I O with output capacity up to 500 mA for remote actuator or alarm control.
  • Built in accelerometer and EcoDriving features for motion based events and driver behavior analysis.
  • Local black box memory (approximately 8 MB, up to ~12 000 records) to buffer data during network interruptions.

How These Features Work with Plaspy​

When the Arnavi L2 is connected and reporting, Plaspy ingests position status and sensor data to present real time maps dashboards and event history. Plaspy automatically detects the device protocol so incoming telemetry is parsed and shown in the platform without manual protocol selection.

  • Real time location and GNSS position updates are displayed on Plaspy maps and used for route playback.
  • Ignition input events are translated into engine on off markers and driver session records inside Plaspy.
  • Universal I O state and outputs can be used to reflect alarm or remote control actions and appear in event logs.
  • BLE sensor readings from paired devices are surfaced in Plaspy for telemetry monitoring and alerting.
  • Buffered black box data is uploaded when connectivity resumes so Plaspy preserves historical data continuity.

Typical Use Cases​

  • Taxi and ride service fleets needing fast device swaps and continuous tracking between shifts.
  • Rental car operations requiring non invasive installation and anti theft monitoring.
  • Service and delivery vehicles where portability and quick reassignment of trackers improves operations.
  • Deployments combining BLE sensors for temperature monitoring or guard tags with vehicle tracking.
  • Short term trials or mobile units that benefit from plug and play installation and offline buffering.

Feature Availability Notes​

  • Some capabilities depend on the device firmware and may change with firmware updates from the manufacturer.
  • Hardware revisions or regional variants can alter available inputs outputs or wireless feature sets.
  • Installation type matters: plug in cigarette lighter installation may differ in behavior from hardwired setups.
  • Bluetooth sensor support and the number of sensors reliably supported can vary with firmware and environment.
  • Confirm I O wiring and output use cases against manufacturer documentation before connecting actuators.

Why Use Plaspy with These Features​

Pairing the Arnavi L2 with Plaspy provides a straightforward path from hardware to operational insight. The device delivers the essential telematics feed — location ignition status sensor telemetry and buffered records — while Plaspy turns those streams into maps alerts reports and historical analysis for fleet managers and operations teams.

To learn more about Plaspy and how it integrates with devices like the Arnavi L2 visit https://www.plaspy.com. For the latest device specific feature details firmware notes and installation guidance verify information on the manufacturer's official website https://www.arusnavi.ru as device features and firmware behavior can change over time.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy