Skip to main content

ATrack - AS1 Features

This page provides a public, non-sensitive feature overview of the ATrack AS1 GPS tracker and how its capabilities map to use with the Plaspy platform. It is intended to help technical evaluators and fleet administrators understand the practical functions of the AS1 when used for asset monitoring through Plaspy.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation method, and manufacturer implementation. Where relevant, this page highlights general capabilities; consult the device manufacturer for the definitive, current technical specifics.

Feature Overview​

The AS1 is positioned as a compact, rugged asset tracker for long-term deployments where reliable location reporting and flexible communications are required. It combines GNSS location with multiple data transport options and several on-device features aimed at minimizing maintenance and maximizing uptime.

  • GPS location tracking for ongoing position reporting of mobile assets
  • Multiple cellular network support including GPRS HSPA and CDMA for flexible connectivity choices
  • IP67 rated enclosure for dust and water resistance in demanding environments
  • Long primary battery life designed to run up to three years under expected duty cycles
  • Built-in 3-axis G-sensor for motion detection and movement-triggered reports
  • Supports data transmission via SMS, TCP, and UDP and supports FOTA updates using FTP

Core Features of ATrack - AS1​

  • GPS based position reporting for consistent location awareness
  • Multi-network cellular connectivity options including GPRS HSPA and CDMA
  • Data transport over SMS and IP channels using TCP or UDP
  • IP67 rated housing to resist dust and water spray for outdoor use
  • Long primary battery life rated up to three years for low maintenance deployments
  • Built-in 3-axis G-sensor to detect motion and support movement reporting
  • Firmware Over The Air updates via FTP to simplify field maintenance
  • Configurable real-time tracking and on-device logging for historical playback and reporting

How These Features Work with Plaspy​

Plaspy can ingest and present the AS1's location and event data so teams can monitor assets centrally. The platform is set up to receive device reports and expose location, motion events, and logged history for operational use.

  • AS1 units can report to Plaspy over TCP or UDP and Plaspy automatically detects the tracker protocol
  • Real-time position updates from GPS are shown in Plaspy for live monitoring and mapping
  • Motion events created by the AS1 G-sensor can be surfaced as movement or activity indicators in Plaspy
  • Logged position data from the device can be uploaded and viewed for route playback and audit
  • Geofence enter and exit events configured on the AS1 can be reflected in Plaspy as area alerts
  • SMS reporting is supported by the device as an alternate transport where IP connectivity is limited

Typical Use Cases​

  • Long-term tracking of high-value mobile assets where infrequent maintenance is desired
  • Monitoring remote equipment or containers that require a rugged, weather resistant tracker
  • Trailer and container tracking scenarios needing long battery life and occasional position reports
  • Rental fleet oversight where movement detection and historical logs support operations
  • Remote site or seasonal equipment monitoring where cellular network choice matters
  • Deployments that benefit from over-the-air firmware updates to keep devices up to date

Feature Availability Notes​

  • Feature sets such as FOTA behavior, supported cellular bands, and geofence limits can vary by firmware and hardware revision
  • Battery life estimates depend on reporting interval, network conditions, and ambient temperature; actual lifetime will vary
  • Regional variants or carrier requirements can affect which cellular technologies (GPRS HSPA CDMA) are available
  • Some functions may be impacted by installation location and orientation despite the AS1 having no external antenna
  • Always verify the specific device configuration, firmware version, and capabilities in the manufacturer documentation

Why Use Plaspy with These Features​

Using Plaspy with the ATrack AS1 provides a unified view of asset location, motion events, and historical tracks so organizations can make operational decisions from a single platform. Plaspy's device handling simplifies bringing AS1 units online, translating incoming reports into map positions, event markers, and timeline data that teams can act on.

To learn more about Plaspy and how it integrates with devices like the AS1 visit https://www.plaspy.com. For the most current and authoritative details about AS1 features, firmware behavior, and manufacturer specifics, please verify information on the official ATrack website https://www.atrack.com.tw/.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy