Skip to main content

AutoFon - Альфа-Маяк Configuration

This page documents the public configuration context for using the AutoFon Альфа‑Маяк (AvtoFon Alfa Beacon) with Plaspy. It focuses on the practical server settings and steps you will use to point the Alfa Beacon to Plaspy so the device can report location and status over GSM GPRS and SMS channels. The guidance here uses publicly available Plaspy server settings and the Alfa Beacon description as the factual basis.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol, while exact manufacturer side setup steps can vary by firmware, hardware revision, installation type, and vendor tools. The Alfa Beacon ships Plaspy compatible out of the box and can report via SMS and GPRS; follow the manufacturer configuration methods or AvtoFon tools to update its server target and transport settings when required.

Configuration Overview​

This configuration prepares the Alfa Beacon to deliver location and event data to Plaspy so the device becomes visible and manageable in the monitoring platform. The goal is to ensure reliable GPRS reporting and optional SMS reporting so Plaspy receives position updates, SOS alerts, and device health notifications.

  • Point the device to the Plaspy server endpoint so GPRS reports are delivered to the platform.
  • Choose the transport protocol (UDP or TCP) supported by the device and server.
  • Use the same Plaspy port used by all supported devices so the server accepts incoming data.
  • Validate connectivity from the device to Plaspy and confirm the device appears in Plaspy after configuration.
  • Preserve the device's ability to send SMS notifications for link to map or emergency alerts where required.

Plaspy Server Settings​

Use the following public Plaspy settings when configuring the Alfa Beacon. Plaspy uses the same port for all supported devices and automatically detects the tracker communication protocol.

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support for UDP or TCP
  • Plaspy automatically detects the tracker protocol

Typical Requirements Before Setup​

  • A charged Alfa Beacon unit with a functional internal battery and the device powered on.
  • Active GSM connectivity for the device. Alfa Beacon supports SMS and GPRS reporting and may include a factory provisioned M2M SIM.
  • Access to the official manufacturer configuration method such as AvtoFon KSA web Personal Account or the device SMS command interface and documentation.
  • A Plaspy account or administrator access so you can confirm the device registers correctly in your monitoring environment.
  • Knowledge of whether the device firmware requires TCP or UDP selection and ability to change that transport if required.
  • Basic connectivity validation tools such as a phone for SMS tests and a way to monitor device reports after configuration.

How This Tracker Connects to Plaspy​

The Alfa Beacon sends GNSS position and status messages over GSM using GPRS as the primary reporting channel and SMS as an alternate or event channel. When configured to use Plaspy, the device directs its GPRS packets to the shared Plaspy server endpoint and port so Plaspy can ingest telemetry and surface it in the platform.

  • Device GPRS reports are sent to d.plaspy.com (or 54.85.159.138) on port 8888.
  • Plaspy supports UDP and TCP transports; select the transport in the Alfa Beacon settings if required.
  • Plaspy automatically detects the tracker protocol so no device-specific protocol selection on the server side is necessary.
  • SMS can be used for ad hoc location links or SOS alerts while GPRS delivers routine telemetry and buffered packets.
  • Buffered message handling on the Alfa Beacon allows Plaspy to receive queued events after connectivity is restored.

Common Configuration Workflow​

  1. Access the official AvtoFon configuration method such as the AvtoFon KSA web Personal Account or the device SMS configuration interface according to the Alfa Beacon manual.
  2. In the device server settings, enter the Plaspy server address by using d.plaspy.com or the server IP 54.85.159.138.
  3. Set the device port to 8888 to match the Plaspy shared port used by all supported devices.
  4. Choose UDP or TCP in the transport setting if the Alfa Beacon requires a transport selection.
  5. Apply or save the configuration changes in the AvtoFon management tool or send the SMS commands that apply the new server settings.
  6. Restart the device if the manufacturer recommends a reboot or if settings require a restart to take effect.
  7. Validate connectivity by confirming the tracker appears in Plaspy and is reporting location and health updates.

Example Configuration Commands​

The Alfa Beacon is commonly configured either through the AvtoFon KSA web Personal Account or via SMS command strings provided by the manufacturer. Exact command formats and SMS keywords vary by firmware and region, so consult the official Alfa Beacon manual for precise syntax. Because command sets differ between firmware versions and regional builds, there are no universal public commands included here. Use the manufacturer documentation or AvtoFon support to obtain the correct SMS commands or web interface steps for setting the server to d.plaspy.com or 54.85.159.138 and port 8888.

Configuration Notes​

  • Firmware differences and hardware revisions can change SMS command syntax and available transport options; always verify commands against the device manual.
  • Choosing UDP or TCP may affect delivery behavior in poor network conditions; test both if your installation experiences intermittent connectivity.
  • The Alfa Beacon supports GPRS primary reporting and SMS as an alternate channel; use SMS for immediate link to map or SOS reporting where needed.
  • Buffered black box storage in the device helps recover missed events after reconnection; confirm buffer behavior in the device specification.
  • Use the AvtoFon KSA web Personal Account or official SMS commands for remote configuration and firmware updates where supported.

Why Use Plaspy with This Configuration​

Using the AutoFon Альфа‑Маяк with Plaspy gives organizations a compact, low maintenance tracking solution that delivers location, SOS alerts, and device health over standard GSM channels. Plaspy’s shared server endpoint and automatic protocol detection simplify integration so the Alfa Beacon can begin reporting with minimal server-side changes, making it suitable for covert asset tracking, anti‑theft monitoring, and lightweight fleet oversight where long battery life matters.

To learn more about Plaspy and platform capabilities, visit https://www.plaspy.com. For the latest device specific configuration commands, firmware notes, and manufacturer procedures verify details on the official AvtoFon site https://www.autofon.ru/ since manufacturer specifications and setup methods can change over time.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy