Skip to main content

AutoFon - Альфа-Маяк 2XL Configuration

This page covers the public configuration context for using the AutoFon Альфа-Маяк 2XL tracker with Plaspy. It summarizes the practical server settings and the typical workflow you will use to point the tracker at Plaspy for GPRS or SMS reporting. The guidance below is focused on the public settings and steps required to make the device visible to a Plaspy-based monitoring platform.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol when data arrives. Manufacturer-side setup steps can vary by firmware version, hardware revision, installation type, and the vendor tools used for configuration, so treat the steps below as practical, public guidance rather than a device firmware manual.

Configuration Overview​

The configuration process prepares the Альфа-Маяк 2XL to forward position and telemetry data to Plaspy reliably, using the tracker’s GPRS reporting channel with SMS as a fallback. The goal is to ensure the device is pointed at the correct Plaspy endpoint, uses the proper transport, and successfully registers and reports so that assets appear in your Plaspy fleet or monitoring view.

  • Specify Plaspy as the destination server so GPRS packets or SMS messages are routed to Plaspy ingestion endpoints.
  • Choose transport and set the port the tracker will use for data reporting.
  • Validate that the tracker has network connectivity and that messages reach Plaspy.
  • Confirm events and periodic position reports appear in the Plaspy platform for monitoring and alerting.
  • Apply and persist the configuration in the tracker and, if required, restart the device to begin reporting.

Plaspy Server Settings​

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support for UDP or TCP
  • Automatic protocol detection in Plaspy

These values are the public Plaspy endpoint details to enter in the tracker configuration or manufacturer tool. Plaspy uses the same port for all supported devices and will automatically detect the protocol used by the tracker.

Typical Requirements Before Setup​

  • A charged and operational Альфа-Маяк 2XL with its integrated SIM active and able to send GPRS or SMS.
  • Access to the official AutoFon configuration method or tool such as the manufacturer web or mobile configuration interface.
  • Sufficient cellular coverage for GPRS reporting and, if required, SMS delivery.
  • Credentials and access to your Plaspy account or platform to validate device reporting and visibility.
  • Basic information about the device such as IMEI or device identifier used by the manufacturer during setup.
  • Knowledge of whether you should use UDP or TCP on port 8888 based on your installation preferences or network conditions.

How This Tracker Connects to Plaspy​

When configured for Plaspy, the Альфа-Маяк 2XL forwards GPS and telemetry data to the shared Plaspy endpoint so the platform can ingest position messages, alerts, and status updates. Plaspy receives the incoming packets and maps the device by its identifier so the asset becomes available for tracking, logging, and alerting.

  • The tracker is configured to send GPRS packets to d.plaspy.com or 54.85.159.138 on port 8888.
  • If the device supports TCP or UDP selection, choose the transport required by your environment; Plaspy accepts both.
  • SMS can be used as a fallback reporting channel when GPRS is not available and may be configured to forward messages to Plaspy-compatible formats.
  • Plaspy automatically detects the tracker protocol when messages arrive, simplifying setup on the platform side.
  • Reporting continuity is improved by the device's internal buffering and retry logic for unsent packets.

Common Configuration Workflow​

  1. Access the official AutoFon configuration method or software such as the manufacturer web or mobile configuration tool.
  2. Locate the server or remote reporting settings in the device configuration interface.
  3. Enter the Plaspy server domain d.plaspy.com or the server IP 54.85.159.138 as the destination.
  4. Set the port value to 8888.
  5. Choose UDP or TCP if your device requires an explicit transport selection.
  6. Save or apply the configuration and, if recommended by the manufacturer, restart the device.
  7. Validate that the device reports to Plaspy by checking the Plaspy platform for initial position or status messages.

Follow the device-specific instructions from AutoFon when using their configuration utilities, and confirm that messages begin arriving in Plaspy after the configuration is applied.

Example Configuration Commands​

No public raw SMS or console commands are included in the manufacturer-provided content for this model in the current documentation. The Альфа-Маяк 2XL can be configured via the official AutoFon configuration tools and over-the-air updates managed by the vendor. Exact command formats, SMS templates, or web UI fields vary by firmware and manufacturer tool, so consult the AutoFon configuration guide or support materials for the precise commands or SMS strings when needed.

If you have access to manufacturer SMS command lists or configuration scripts, the essential parameter values you will set are the Plaspy server (d.plaspy.com or 54.85.159.138), port 8888, and the preferred transport UDP or TCP. Preserve any provider APN placeholders used by the manufacturer when applying settings.

Configuration Notes​

  • Firmware and hardware revisions can change configuration menus or SMS command formats; verify instructions against your device firmware revision.
  • TCP and UDP both work with Plaspy; choose the transport that best fits your network environment and reliability requirements.
  • The device supports GPRS reporting with SMS fallback. Use SMS configuration only when GPRS is unavailable or for out-of-band commands.
  • AutoFon devices include buffering and retry logic to reduce data gaps; verify buffer behavior on your firmware version.
  • Remote firmware update capability exists for some units; ensure the device stays on a supported firmware for long term compatibility.

Why Use Plaspy with This Configuration​

Using AutoFon Альфа-Маяк 2XL with Plaspy provides a practical, low-maintenance option for organizations that need long-term visibility and operational oversight of assets. The tracker’s GPRS reporting combined with SMS fallback and internal buffering helps maintain continuity of position and event reporting into Plaspy dashboards and alert systems.

To learn more about Plaspy and its platform capabilities visit https://www.plaspy.com. Because manufacturer configuration methods and firmware behavior can change over time, verify the latest device specific setup details on the AutoFon website https://www.autofon.ru/ before deploying at scale.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy