Skip to main content

AutoFon - Альфа-Маяк XL Configuration

This page documents the public configuration context for using the AutoFon Альфа-Маяк XL tracker with the Plaspy platform. It summarizes the practical server settings Plaspy requires and explains the common steps you will follow to point the Альфа-Маяк XL at Plaspy for GPRS or SMS reporting. Content here is intended to help integrators and technical users prepare the tracker for Plaspy visibility.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol when data arrives. Manufacturer side setup steps can vary depending on firmware version, hardware revision, installation type, and the vendor configuration tools you use. Use this guide for practical orientation and verify device specific details with AutoFon documentation where needed.

Configuration Overview​

This configuration prepares the Альфа-Маяк XL to send position and status updates to Plaspy over the network so that Plaspy can aggregate locations, alerts, and historical routes. The key action is pointing the device at the Plaspy server endpoint (d.plaspy.com or the equivalent IP) and using the shared Plaspy port so the platform can receive and auto-detect the tracker protocol.

  • Provide the Plaspy server address to the tracker so GPRS or SMS delivered data is routed to Plaspy.
  • Select the transport mode the device supports, either UDP or TCP, and set the same Plaspy port used by all Plaspy devices.
  • Save and apply the configuration using the device manufacturer tools or SMS commands, depending on your device workflow.
  • Validate connectivity by confirming the tracker reports to Plaspy and appears in the Plaspy platform.
  • Use the device management tools (AutoFon web account or mobile app) and confirm firmware version and reporting schedules match your expectations.

Plaspy Server Settings​

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888 which is the same port used for all devices in Plaspy
  • Transport support UDP or TCP — the device may be configured using either transport on port 8888
  • Plaspy automatically detects the tracker protocol when incoming data arrives

Typical Requirements Before Setup​

  • Access to the official AutoFon configuration method such as the AutoFon KSA web account, mobile app, or documented SMS commands
  • A powered and reachable Альфа-Маяк XL device with its factory embedded SIM active and able to send GPRS or SMS
  • Network coverage at the installation site sufficient for GSM GPRS or SMS delivery
  • Administrative access to any aggregator or provisioning account used by the vendor for remote configuration
  • A record of the device identifier or IMEI to correlate incoming reports with the device listing in Plaspy
  • A plan for testing reporting frequency and SOS or event messages after configuration

How This Tracker Connects to Plaspy​

When configured for Plaspy, the Альфа-Маяк XL sends periodic position and event updates over GSM networks using GPRS or SMS. Those transmissions are directed to the Plaspy server endpoint and port so the platform can parse and display the data for monitoring and alerts.

  • Device sends GPRS or SMS packets to d.plaspy.com or the equivalent IP 54.85.159.138
  • Packets arrive on Plaspy port 8888 where the platform accepts data from all supported devices
  • Plaspy automatically detects the tracker protocol and parses location and status fields
  • SOS and event messages forwarded to Plaspy are surfaced as alerts and notifications
  • The device black-box buffer ensures data persistence and retries so Plaspy receives updates when connectivity resumes

Common Configuration Workflow​

  1. Access the official manufacturer configuration method or software such as the AutoFon KSA portal, mobile app, or documented SMS-based interface.
  2. Enter the Plaspy server address using either the domain d.plaspy.com or the server IP 54.85.159.138 as provided by Plaspy.
  3. Set the target port to 8888 which is the shared Plaspy port for all devices.
  4. Choose UDP or TCP if the device requires a transport selection; configure the same transport on the device as required by your installation.
  5. Apply or save the configuration in the manufacturer tool or send the save command via SMS if using SMS provisioning.
  6. Restart or power cycle the device if the manufacturer instructions require it to activate the new settings.
  7. Validate that the device reports to Plaspy by confirming the tracker appears on the Plaspy platform and that location updates or events are received.

Example Configuration Commands​

The exact configuration commands and the method to send them vary by firmware and the manufacturer's provisioning tools. AutoFon devices are commonly configured through the AutoFon KSA web portal, mobile applications, or SMS commands provided by the manufacturer. Because commands and syntax can change between firmware versions, this page does not invent specific SMS strings.

If you have manufacturer supplied commands or an installer guide, use those resources to set:

  • Server address to d.plaspy.com or 54.85.159.138
  • Port to 8888
  • Transport to UDP or TCP if required

Always preserve placeholders exactly as provided by the vendor and check AutoFon documentation for the current command formats.

Configuration Notes​

  • Firmware differences can change available commands and parameter names. Confirm the exact syntax with the manufacturer documentation before applying changes.
  • Choose TCP or UDP according to network behavior and installation requirements; both are supported when pointing the device to port 8888.
  • Devices with embedded SIMs and factory provisioning may already be partially configured; verify current settings before making changes.
  • Installer practices and regional firmware builds can vary, so validate reporting behavior in a controlled test before full deployment.
  • Keep a record of IMEI and configuration changes to assist Plaspy support or manufacturer troubleshooting if needed.

Why Use Plaspy with This Configuration​

Using the Альфа-Маяк XL with Plaspy provides a practical solution for long-term, low maintenance asset tracking where discreet installation and long battery life are priorities. Pointing the device to the shared Plaspy server endpoint and port enables Plaspy to consolidate location updates, SOS triggers, and historical tracks into a single platform for operational visibility and alerting.

To learn more about Plaspy and how it handles device reporting and fleet telemetry, visit https://www.plaspy.com. For the most current device specific configuration methods, firmware notes, and manufacturer guidance, always verify details with AutoFon at https://www.autofon.ru/ as specifications and setup procedures can change over time.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy