Skip to main content

AutoFon - Alpha-Beacon 2XL Configuration

This page describes the public configuration context for using the AutoFon Alpha-Beacon 2XL with Plaspy. It focuses on the practical server settings, recommended workflow, and verification steps that allow the Alpha-Beacon 2XL to report position and telemetry to Plaspy monitoring services using the device's GPRS and SMS reporting capabilities and integrated eSIM.

Plaspy uses shared server settings for supported devices and automatically detects the tracker protocol when data arrives. Exact steps you perform on the manufacturer side can vary by firmware version, hardware revision, installation type, and the AvtoFon configuration tools you use. Use this guide as a practical reference and verify vendor instructions for device specific details.

Configuration Overview​

The goal of configuration is to prepare the Alpha-Beacon 2XL to send location and status data to the Plaspy server endpoint so the device appears in the Plaspy monitoring environment. Typical configuration sets the Plaspy server host or IP and the common Plaspy port, and selects the transport method the tracker uses to deliver telemetry.

  • Point the device to the Plaspy server endpoint d.plaspy.com or the equivalent IP address 54.85.159.138 and use port 8888 for reporting.
  • Choose the transport method supported by the tracker, UDP or TCP, if the device requires an explicit selection.
  • Validate that the integrated eSIM and GPRS path are active so the device can send packets to Plaspy.
  • Confirm that reports reach Plaspy and appear in the monitoring interface so events and historical telemetry are visible.
  • Use the AvtoFon KSA or manufacturer configuration tools to apply and save settings if required by your device firmware.

Plaspy Server Settings​

  • Server domain: d.plaspy.com
  • Server IP: 54.85.159.138
  • Port: 8888
  • Transport: Supports UDP or TCP on port 8888 depending on device capability
  • Plaspy platform notes: All devices in Plaspy use the same port and Plaspy automatically detects the tracker protocol when incoming data is received

Typical Requirements Before Setup​

  • The Alpha-Beacon 2XL must have power and a charged internal battery or temporary external power during configuration.
  • Integrated eSIM must be provisioned and active so GPRS reporting is available from the device.
  • Access to the official AvtoFon configuration method or KSA account for device parameter changes.
  • Live GPRS coverage for the device or SMS capability for fallback reporting and initial verification.
  • A Plaspy account or integration prepared to receive the device data and confirm visibility in the platform.
  • Physical access or remote configuration method as required by installation and firmware to apply new server parameters.

How This Tracker Connects to Plaspy​

The Alpha-Beacon 2XL sends location and telemetry to the shared Plaspy server endpoint and port so position reports, SOS alerts, and stored events are visible in Plaspy monitoring. Plaspy receives incoming packets on the common port and uses automatic protocol detection to interpret the tracker data.

  • Primary reporting over GPRS to the Plaspy endpoint d.plaspy.com or 54.85.159.138 on port 8888.
  • SMS reporting can be used as a fallback or for link to map messages when configured by the manufacturer platform.
  • Device retry logic and the onboard black box increase the chance that important events are transmitted to Plaspy.
  • Reports sent to Plaspy appear as real time updates, and historical telemetry is available for incident review.
  • Plaspy automatically detects the tracker protocol so you only need to provide the correct server and port information.

Common Configuration Workflow​

  1. Access the official AvtoFon configuration method such as the AvtoFon KSA web or mobile interface or the manufacturer configuration tool provided with the device.
  2. Locate the server or telemetry settings section for external monitoring and set the server host to d.plaspy.com or the server IP 54.85.159.138.
  3. Set the server port to 8888 as Plaspy uses the same port for all supported devices.
  4. If the device requires a transport selection, choose UDP or TCP according to your deployment needs and device capability.
  5. Save or apply the configuration in the manufacturer tool and push settings to the Alpha-Beacon 2XL.
  6. Restart the device if the configuration process or firmware requires a reboot to apply network parameters.
  7. Validate connectivity by confirming the device reports successfully to Plaspy and that location and event data appear in the monitoring environment.

Example Configuration Commands​

The Alpha-Beacon 2XL is typically configured through AvtoFon configuration tools or the AvtoFon KSA account. Exact command formats and SMS strings can vary by firmware, hardware revision, or vendor provisioning, so the manufacturer tool is the recommended method for setting the Plaspy server. When configuring manually, ensure you enter d.plaspy.com or 54.85.159.138 and port 8888 and select UDP or TCP if the tracker requires it. Plaspy will automatically detect the tracker protocol once the device starts sending packets.

Configuration Notes​

  • Firmware variations can change where and how server parameters are entered; always check the device firmware notes before applying settings.
  • TCP provides a connection oriented transport while UDP is connectionless; choose the transport the device supports and that matches your reliability and latency requirements.
  • Because the Alpha-Beacon 2XL uses an integrated eSIM, confirm provisioning status and data plan availability before attempting GPRS reporting.
  • The device supports SMS fallback for critical alerts if configured by the manufacturer; use SMS for initial verification where GPRS is not available.
  • Use the AvtoFon KSA management tools when possible to simplify parameter changes and to benefit from firmware specific guidance.

Why Use Plaspy with This Configuration​

Using Plaspy to collect reports from the Alpha-Beacon 2XL gives organizations centralized visibility for assets protected by this low maintenance, long life tracker. Plaspy receives and organizes real time location updates and historical telemetry so you can monitor movement, receive SOS alerts, and review events stored by the device for recovery and analysis workflows.

Learn more about Plaspy and how Plaspy can integrate device data at https://www.plaspy.com. Device specific configuration steps, firmware behavior, and provisioning details can change over time, so verify the latest setup and firmware guidance with the manufacturer at https://www.autofon.ru/.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy