Skip to main content

AutoFon - Диалог-Маяк Configuration

This page documents the public configuration context for using the AutoFon Диалог-Маяк (Dialog-Beacon) tracker with Plaspy. It summarizes the shared server values and practical setup steps that are commonly required to point the device at Plaspy so the platform can receive location and telemetry reports sent by the tracker over GPRS or SMS.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol, but exact manufacturer-side setup steps can vary by firmware, hardware revision, installation type, and vendor configuration tools. Use this guide to prepare the device for Plaspy integration, and consult the official AutoFon documentation for any device-specific or firmware-specific details.

Configuration Overview​

This configuration process is focused on preparing the Диалог-Маяк to communicate reliably with Plaspy, validating network connectivity, and enabling data visibility in the Plaspy platform. The steps are general and intended to be applied with the official AutoFon configuration method you use for your device.

  • Point the tracker to the Plaspy server endpoint so GPRS reports are routed to the platform.
  • Configure the device port and transport (UDP or TCP) as required by the tracker firmware.
  • Verify cellular connectivity and APN settings so GPRS reporting is allowed by the carrier.
  • Enable or confirm SMS reporting if you will use SMS as a backup reporting channel.
  • Apply and save settings in the device and confirm that telemetry appears in Plaspy.

Plaspy Server Settings​

When configuring the AutoFon Диалог-Маяк for Plaspy, use the following publicly documented Plaspy settings:

  • server domain d.plaspy.com
  • server IP 54.85.159.138
  • port 8888
  • transport support for UDP or TCP
  • Plaspy automatically detects the tracker protocol

Note that Plaspy uses the same port for all supported devices and that the platform will attempt to identify the tracker protocol automatically once the device reports to the endpoint.

Typical Requirements Before Setup​

  • A powered and functional Диалог-Маяк unit with charged internal batteries or external power applied.
  • A working SIM card with data enabled or SMS capability and sufficient credit for registration and testing.
  • APN and carrier settings handy for the SIM provider so GPRS can be established.
  • Access to the official AutoFon configuration method or tool provided by the vendor or installer.
  • A means to reboot or power-cycle the device after configuration if required.
  • Basic credentials or access rights for the device configuration interface when applicable.

How This Tracker Connects to Plaspy​

The Диалог-Маяк sends location and event telemetry to Plaspy using GPRS reporting to the configured monitoring endpoint, and it can use SMS reporting as a secondary channel when required. Configure the device to target the shared Plaspy endpoint so the platform can ingest coordinates, alarms, and buffered packets.

  • The tracker is pointed at d.plaspy.com or 54.85.159.138 as the monitoring server.
  • Reports and packets are sent to port 8888 on the Plaspy server.
  • Transport may be set to UDP or TCP depending on firmware options; either is accepted.
  • Plaspy automatically detects the tracker protocol and maps incoming messages to the device.
  • The device may use its black-box buffer to retry and deliver unsent packets to the Plaspy endpoint when coverage returns.

Common Configuration Workflow​

  1. Access the official AutoFon configuration method or software for the Диалог-Маяк (manufacturer tool, SMS commands, or installer interface).
  2. Enter the Plaspy server address as either d.plaspy.com or 54.85.159.138 in the server/host field.
  3. Set the reporting port to 8888 (Plaspy uses the same port for all supported devices).
  4. Choose the transport option UDP or TCP if the device requires an explicit transport selection.
  5. Apply or save the configuration within the device tool or via the device command method.
  6. Restart or power-cycle the device if required by the configuration method to activate the new settings.
  7. Validate that the device reports to Plaspy by confirming the tracker appears in the Plaspy platform and that telemetry is received.

Example Configuration Commands​

The exact commands and configuration interface vary by AutoFon firmware and the tool you use. This model configuration summary does not include device-specific command strings. Depending on your device firmware and installer tool, configuration is commonly performed via one of these methods:

  • A vendor desktop or web configuration utility that exposes server, port, APN, and transport fields.
  • SMS configuration commands sent to the device when SMS-based setup is supported.
  • An installer interface on the device that accepts parameter inputs during initial provisioning.

If you have device-specific command examples from AutoFon documentation or your installer, apply those commands to set the server to d.plaspy.com or 54.85.159.138 and the port to 8888, then select UDP or TCP as needed. Always preserve the order: set APN and carrier parameters first, then server and port, then save and restart.

Configuration Notes​

  • Firmware and hardware revisions can change available configuration options and the exact command syntax; always check the device firmware version before applying commands.
  • If the device supports both SMS and GPRS reporting, it's common to configure GPRS first and keep SMS as a backup channel for critical alerts.
  • Choose UDP or TCP according to your installation practice; Plaspy accepts either and detects the tracker protocol automatically.
  • Installer tools and vendor utilities may wrap commands differently; use the official AutoFon method provided for your device.
  • Confirm APN settings with the cellular carrier if GPRS sessions fail to establish.

Why Use Plaspy with This Configuration​

Configuring the AutoFon Диалог-Маяк to report to Plaspy gives organizations a practical way to centralize location, event, and telemetry data for long-term or covert deployments. The device's black-box buffering, GPRS and SMS reporting options, and event-rich telemetry (SOS, accelerometer alerts, alarm inputs, audio monitoring) pair well with Plaspy's monitoring and alerting workflows for theft response, fleet oversight, and unattended asset protection.

To learn more about Plaspy and supported integrations visit https://www.plaspy.com. For the latest device-specific configuration commands, firmware details, and installation guidance verify current information on the official AutoFon website https://www.autofon.ru/. Manufacturer specifications and configuration methods can change over time, so confirm details before final deployment.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy