Autoseeker - AT-17K Protocol
This page describes the public protocol context for using the Autoseeker AT-17K with the Plaspy platform. It explains how the tracker reports location and telemetry to Plaspy and what connection settings are used, while avoiding firmware specific internals or proprietary parser details. The goal is to help technical users, integrators, and fleet administrators understand how the device communicates at a high level with Plaspy for reliable tracking.
Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when a device is configured to report to the Plaspy endpoint. Exact protocol behavior can vary by firmware version, hardware revision, and the manufacturer implementation, so always validate device settings and firmware details against the official Autoseeker documentation when needed.
Protocol Overview
The AT-17K reporting protocol is the device layer that enables the tracker to identify itself, stream GPS positions, and transmit status telemetry such as battery level, alarm events, and sensor inputs to Plaspy. This documentation focuses on the public communication context and how those messages reach the Plaspy ingestion endpoint rather than on private packet internals.
- The protocol carries position updates, timestamps, and event indicators that Plaspy maps into location, history, and alarm workflows.
- Telemetry fields commonly include battery and charging state, movement or vibration alarms, and basic device health signals that support maintenance planning.
- The device reports over the cellular uplink so position and event data arrive in near real time to Plaspy for monitoring and history playback.
- Protocol messages are used by Plaspy to populate geofence, alert, and reporting features without requiring manual protocol selection on the platform side.
- Because firmware and hardware revisions can change message content and frequency, practical integration focuses on correct endpoint addressing and transport selection.
How Plaspy Detects the Protocol
Plaspy listens on a single unified endpoint for device reports and includes automatic protocol detection to simplify device onboarding. When the AT-17K is configured to report to Plaspy, the platform identifies the tracker protocol without requiring the user to pick a protocol manually in most cases.
- Plaspy server domain for device reporting is d.plaspy.com and the server IP is 54.85.159.138.
- The shared ingestion port used by Plaspy is 8888 and all devices in Plaspy use the same port.
- Plaspy automatically detects the tracker protocol when the device is properly pointed to the Plaspy endpoint.
- Users normally only need to set the device to report to d.plaspy.com or the IP and select TCP or UDP according to device capability.
- If a device does not appear in Plaspy, common checks are endpoint address, transport type, APN settings, and firmware behavior.
Transport and Connection Context
Connection context refers to the network transport and endpoint settings that allow the AT-17K to deliver its messages to Plaspy. The AT-17K can be configured to use either UDP or TCP depending on the device configuration and the deployment needs.
- The AT-17K may be configured to use UDP or TCP on port 8888 depending on device support and chosen settings.
- Devices can be pointed at the Plaspy reporting endpoint by domain d.plaspy.com or directly to 54.85.159.138.
- Plaspy uses the same port 8888 for all supported devices to simplify routing and ingestion.
- Choosing UDP can reduce overhead for frequent short reports while TCP can provide a reliable delivery channel when the device supports it.
- Network level factors such as carrier NAT, firewall rules, and APN configuration can affect delivery and should be validated during setup.
Protocol Compatibility Notes
- Firmware revisions on the AT-17K can change which telemetry fields are sent and how events are encoded; check the current device firmware notes.
- Hardware revisions or different production batches may have variations in available sensors or alarm behavior that impact the data sent to Plaspy.
- Transport selection between UDP and TCP should match what the device firmware supports and what the carrier network reliably permits.
- When integrating at scale, confirm that APN and SIM settings allow outbound connections to the Plaspy endpoint and that the device has network connectivity.
- Manufacturer supplied configuration commands or remote settings may be required to point the device to d.plaspy.com or the IP address.
- Always validate compatibility and event mappings by performing live tests and reviewing received telemetry in Plaspy.
Why Protocol Understanding Matters
Knowing how the AT-17K communicates with Plaspy helps ensure accurate setup, faster troubleshooting, and consistent long term reporting for asset and fleet tracking. Understanding the communication context reduces discovery time when devices do not appear or when expected telemetry is missing.
- Faster diagnostics for common connectivity issues such as wrong endpoint, transport mismatch, or APN problems.
- Clear expectations about what telemetry and alarms the device will provide to Plaspy under different firmware states.
- Better planning for deployment scenarios that require low power behavior, solar recharge telemetry, or long standby operation.
- Informed decisions about transport choice and reporting frequency to balance battery life and update timeliness.
- Easier coordination with Autoseeker support when device behavior differs from documentation due to firmware or hardware revision.
Why Use Plaspy with This Protocol
Using the Autoseeker AT-17K with Plaspy gives organizations reliable location visibility, event alerting, and historical playback while simplifying device onboarding through shared endpoint settings and automatic protocol detection. The AT-17K’s rugged design, large battery, and solar recharge complement Plaspy workflows for long term asset and fleet monitoring in harsh or remote environments.
To learn more about Plaspy and how it handles device connections and fleet workflows visit https://www.plaspy.com. Please note that protocol support, firmware behavior, and manufacturer implementation details can change over time, so verify the latest device specific protocol and firmware information with Autoseeker at https://autoseekergps.com/ before finalizing deployments.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.