Skip to main content

CanTrack - TK08A Configuration

This page provides the public configuration context for using the CanTrack TK08A tracker with Plaspy. It summarizes the practical server settings, recommended workflow and prerequisites you need to prepare a TK08A for real time position and telemetry reporting to Plaspy. The content is focused on public integration steps and the shared Plaspy server values required to connect the device.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol when the device reports to the platform. Exact manufacturer-side setup steps for the TK08A can vary by firmware version, hardware revision, installation type and the configuration tool you use, so follow these instructions as a practical guide and verify device specifics with the manufacturer documentation when needed.

Configuration Overview​

The goal of configuration is to point the TK08A at Plaspy and confirm the unit reliably delivers location and event data to the platform. This includes setting the correct server endpoint and transport, verifying mobile connectivity, and ensuring the tracker reports the expected telemetry so Plaspy can display live location, alerts and history.

  • Configure the TK08A to send data to Plaspy using the shared Plaspy server endpoint.
  • Verify the device has a working SIM and mobile data path for GPRS reporting or SMS fallback.
  • Confirm transport selection and port settings so the tracker communicates on Plaspy port 8888.
  • Validate location, ACC and alarm events are received by Plaspy after configuration.
  • Test immobilizer and alarm behaviors from Plaspy once the device is reporting.

Plaspy Server Settings​

Set the TK08A to report to the following Plaspy server values. Plaspy uses the same port for all supported devices and automatically detects the device protocol when data arrives.

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support UDP or TCP depending on device requirements
  • Plaspy automatically detects the tracker protocol when the device reports

Typical Requirements Before Setup​

  • A TK08A unit that is powered and connected according to the manufacturer installation guide.
  • A working SIM card with an active data plan and SMS capability if you plan to use SMS for configuration or fallback.
  • Access to the official CanTrack configuration method you intend to use such as USB configuration software, SMS commands, or the vendor configuration tool.
  • A current firmware revision that supports GPRS reporting to third party platforms and the device features you require.
  • A Plaspy account or platform access so you can verify device connectivity, view live positions and confirm events.
  • Basic knowledge of the device wiring for ignition ACC and relay controls when testing immobilizer functions.

How This Tracker Connects to Plaspy​

When configured for Plaspy, the TK08A forwards location and event data to the shared Plaspy server endpoint and port so the platform can index and display telemetry. Plaspy accepts reports over the declared transport and matches the incoming data to the correct protocol automatically.

  • The tracker sends GPS and event data to d.plaspy.com or 54.85.159.138 on port 8888.
  • GPRS TCP or UDP is commonly used for real time reporting to Plaspy depending on device settings.
  • SMS can be used for configuration commands or as a fallback reporting method if supported by the provisioning workflow.
  • Telemetry such as ACC status, vibration alarms, power-cut and immobilizer events are transmitted to Plaspy for alerts and history.
  • If cellular coverage is interrupted the TK08A buffers positions locally and uploads stored records to Plaspy when the connection is restored.

Common Configuration Workflow​

  1. Access the official CanTrack configuration method or software for the TK08A (USB tool, SMS command set or vendor configuration utility). This is the recommended starting point for reliable setup.
  2. Enter the Plaspy server address by specifying d.plaspy.com or the IP 54.85.159.138 in the device server field.
  3. Set the server port to 8888 which Plaspy uses for all supported devices.
  4. Choose the transport mode UDP or TCP if the TK08A configuration requires an explicit transport selection.
  5. Configure any required APN or SIM settings so the tracker has a working GPRS data connection if using GPRS reporting.
  6. Apply or save the configuration and restart the device if the tool or firmware requires a reboot to apply changes.
  7. Validate that the device reports to Plaspy by checking the Plaspy platform for the device connection, location updates and expected telemetry.

Example Configuration Commands​

The TK08A can be configured using manufacturer tools, USB configuration software or SMS commands depending on the firmware and vendor toolchain. Exact commands and syntax are provided by CanTrack and can vary by firmware, so consult the official documentation or the configuration utility for the exact command set applicable to your device and firmware revision.

If you use SMS commands with your TK08A model and firmware version, follow CanTrack published SMS syntax and replace placeholders with your carrier or environment values where required. For APN or user placeholders, the manufacturer documentation will show how to use values like [apn], [apnu] or [apnp] if those placeholders are supported by your firmware.

Configuration Notes​

  • Firmware and tool differences can change the exact command syntax and available options. Always verify commands against the PKG or user manual that matches your firmware.
  • Choosing TCP versus UDP may affect delivery behavior depending on network reliability and operator NAT. Plaspy accepts either so select the transport that works best for your network.
  • Using the server domain d.plaspy.com is recommended for flexibility but configuring the IP 54.85.159.138 is an option if DNS is not available in your environment.
  • Ensure the SIM APN and mobile data are working before final validation to avoid false connectivity failures.
  • If you use SMS for configuration, follow any SMS command limits and confirm successful command responses from the device before assuming settings took effect.

Why Use Plaspy with This Configuration​

Pairing the CanTrack TK08A with Plaspy provides a practical, low-footprint solution for motorcycle, scooter and e-bike fleets that need continuous position updates, event alerts and remote immobilizer control. With the TK08A reporting to the shared Plaspy server endpoint and Plaspy automatically detecting the protocol, administrators can centralize live tracking, alarms and historical routes without per-device port management.

Learn more about Plaspy and how it supports device integration by visiting https://www.plaspy.com. For the latest TK08A commands, firmware details and device specific setup instructions verify the manufacturer documentation at https://www.cantrackgps.com/ as implementation details and firmware behavior can change over time.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy