Skip to main content

Cityeasy - 008 Configuration

This page describes the public configuration context for using the Cityeasy 008 tracker with Plaspy. It collects the practical server values, workflow guidance, and setup considerations needed to point a Cityeasy 008 at Plaspy for real time visibility. The content focuses on the publicly available integration points rather than device internal details.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol, but exact manufacturer-side steps can vary with firmware revision, hardware revision, installation type, or vendor configuration tools. Use this guide to prepare the Cityeasy 008 for connection to Plaspy and consult the manufacturer for device specific instructions.

Configuration Overview​

Configuring a Cityeasy 008 for Plaspy prepares the tracker to report location and events to the Plaspy platform, enabling live tracking and historical route visibility through Plaspy. The overview below summarizes the practical goals of the configuration process.

  • Point the device to the Plaspy server endpoint so location packets are delivered to Plaspy.
  • Choose the transport (UDP or TCP) if the device requires a transport selection.
  • Set the shared Plaspy port so the device communicates on the correct port used by all devices.
  • Save and apply the configuration on the device using the manufacturer tool or SMS interface.
  • Verify the device appears in Plaspy and is reporting position and status updates.

Plaspy Server Settings​

Use the following public server settings when configuring the Cityeasy 008 to communicate with Plaspy. Plaspy uses the same port for all supported devices and automatically detects the tracker protocol.

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support for UDP or TCP depending on device requirements
  • Plaspy automatically detects the tracker protocol once packets arrive on the server

Typical Requirements Before Setup​

  • Physical access to the Cityeasy 008 or to the installer software provided by the manufacturer
  • A stable power source for the tracker during configuration and testing
  • Access to the device configuration method supported by the tracker (manufacturer app, desktop tool, or SMS interface)
  • Knowledge of the device firmware version and any vendor-specific configuration notes
  • A method to view or capture device telemetry to confirm packets are sent to Plaspy (for example a device log or manufacturer confirmation)
  • Administrative access to the account in Plaspy where the device will be observed or registered

How This Tracker Connects to Plaspy​

The Cityeasy 008 sends its location and event data to the Plaspy server endpoint and port so the platform can ingest, decode, and display the device information. Plaspy listens on a single common port and uses automatic protocol detection to handle different tracker protocols.

  • The tracker is configured to report to d.plaspy.com or the equivalent IP address 54.85.159.138
  • Data is sent to port 8888 which is the shared port Plaspy uses for all devices
  • Transport can be UDP or TCP depending on the device configuration; Plaspy accepts either
  • Plaspy automatically detects the tracker protocol when packets arrive to the server
  • Once reporting, the device becomes visible in Plaspy for live location, history, and event monitoring

Common Configuration Workflow​

Follow these practical steps to point a Cityeasy 008 at Plaspy and validate connectivity.

  1. Access the official Cityeasy configuration method or software provided by the manufacturer (app, desktop tool, or SMS command interface).
  2. In the server or APN configuration area enter the Plaspy server domain d.plaspy.com or the server IP 54.85.159.138 as the reporting endpoint.
  3. Set the port to 8888 which Plaspy uses for all supported devices.
  4. If the device requires selecting a transport, choose UDP or TCP based on installer preference or device guidance.
  5. Apply or save the configuration within the manufacturer tool and confirm the device accepted the changes.
  6. Restart or power cycle the device if the manufacturer workflow requires a reboot to apply network changes.
  7. Validate that the device reports to Plaspy by checking the device list and recent messages in Plaspy or by confirming incoming packets on the server side.

Example Configuration Commands​

The exact configuration commands and format vary by firmware and the manufacturer configuration tool. Because manufacturer commands and interfaces differ, follow the official Cityeasy instructions or configuration utility for precise command syntax. Plaspy accepts data delivered to d.plaspy.com or 54.85.159.138 on port 8888 over UDP or TCP and will automatically detect the tracker protocol once packets arrive.

Configuration Notes​

  • Firmware and hardware revisions can change command formats and available configuration options; confirm details for your specific device revision.
  • Choose UDP or TCP based on reliability needs and what the Cityeasy tools recommend; Plaspy accepts both transports.
  • Plaspy uses the same port 8888 for all supported devices which simplifies multi-model deployments.
  • Some installers prefer to set the server by domain d.plaspy.com while others use the numeric IP 54.85.159.138; both are accepted by Plaspy.
  • Keep a record of any manufacturer commands or configuration files used for future maintenance and troubleshooting.

Why Use Plaspy with This Configuration​

Using the Cityeasy 008 with Plaspy provides a straightforward path to integrating vehicle location, movement alerts such as vibration events, and historical route information into a single monitoring platform. Configuring the device to report to Plaspy allows organizations to gain operational visibility for individual vehicles or fleets without complex per-device server arrangements.

Learn more about Plaspy and how it can centralize your tracking data at https://www.plaspy.com. Please verify the latest device specific configuration methods and firmware behavior with the Cityeasy manufacturer documentation or their official website as device setup steps and command syntax can change over time.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy