Skip to main content

Concox - GT06N 4G Features

This page provides a public feature overview of the Concox GT06N 4G as used with Plaspy. It summarizes the device capabilities that are relevant for fleet managers, security teams, and operators using Plaspy to aggregate location and event telemetry from compatible trackers.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation wiring, and manufacturer implementation. For device-specific configuration, advanced settings, and the latest technical details please consult official Concox documentation.

Feature Overview​

The GT06N 4G is a compact LTE Cat 1 vehicle tracker designed for professional fleet and asset monitoring. Its combination of multi-constellation GNSS positioning, onboard event sensing, and vehicle I/O enables continuous location awareness and event reporting that Plaspy can surface in dashboards and alerts.

  • Real-time GNSS positioning using GPS, BDS, and GLONASS for consistent location accuracy.
  • LTE Cat 1 cellular connectivity for frequent telemetry uploads and timely alerts.
  • Onboard accelerometer for detection of harsh events, vibration, and tamper conditions.
  • Vehicle inputs such as ignition (ACC) and a relay output for remote immobilizer workflows.
  • In-cabin SOS panic button and built-in microphone supporting emergency and listen-in use cases.

Core Features of Concox - GT06N 4G​

  • Multi-constellation GNSS support (GPS, BDS, GLONASS) with positioning accuracy specified around the device capability.
  • LTE Cat 1 (4G) wide band cellular connectivity for continuous telemetry transmission.
  • Onboard accelerometer for harsh acceleration, braking, cornering detection, and vibration monitoring.
  • Ignition (ACC) detection input to reflect vehicle run status and enable ignition-based rules.
  • Relay output for remote immobilizer or cut-off control when used with appropriate wiring and policies.
  • Dedicated SOS panic button and built-in microphone for emergency alerts and optional listen-in.
  • Wide input voltage support suited for a variety of vehicle types and a backup battery for short power-loss operation.
  • Local data storage capable of retaining several thousand data entries for intermittent connectivity scenarios.

How These Features Work with Plaspy​

Plaspy ingests location and event data from compatible trackers so operators can monitor fleets, receive alerts, and run historical reports. The GT06N 4G’s telemetry and event signals map to Plaspy features to provide actionable visibility across vehicles.

  • Real-time location and movement: GNSS coordinates, speed, and heading appear in Plaspy’s live maps and vehicle lists.
  • Event alerts: accelerometer events, tamper or vibration notices, SOS presses, and ignition changes become notifications or trigger workflows.
  • Historical reporting: stored device records and streamed telemetry support trip histories and event timelines in Plaspy reports.
  • Remote control actions: relay-triggered immobilization workflows can be issued through Plaspy where device wiring and policies permit.
  • Protocol handling: Plaspy automatically detects supported tracker protocols so device traffic can be processed and displayed without manual protocol selection.

Typical Use Cases​

  • Fleet management and logistics tracking across mixed vehicle fleets for route verification and utilization metrics.
  • Anti-theft response and recovery using ignition detection and remote immobilizer control.
  • Asset security and finance workflows requiring tamper notices, event history, and location proof.
  • Passenger safety and public transport monitoring using SOS and emergency listen-in capabilities.
  • Driver coaching and safety programs that use accelerometer-driven harsh event detection to reduce risky behavior.
  • Mixed vehicle deployments where wide voltage input and compact form factor simplify installations.

Feature Availability Notes​

  • Some features depend on firmware and regional hardware variants; not every SKU may expose all inputs or behaviors described here.
  • Physical installation and wiring determine availability of vehicle inputs, relay control, microphone listen-in, and backup functionality.
  • Event definitions and thresholds (for harsh braking, tamper, geofence, etc.) may differ by firmware and configuration tools.
  • The device supports configuration via manufacturer tools and common techniques; consult Concox configuration guides for exact procedures.
  • Verify environmental and certification details for installations with specific temperature, ingress, or regulatory requirements.

Why Use Plaspy with These Features​

Using the GT06N 4G together with Plaspy provides operators a practical way to centralize location, event, and emergency information from vehicles into a single operational view. Plaspy’s ability to ingest device telemetry and surface events makes it easier to monitor fleet status, respond to incidents, and generate historical records for compliance and analysis.

Learn more about how Plaspy can help you manage Concox trackers and mixed fleets at https://www.plaspy.com. Device features, firmware behavior, and manufacturer implementation may change over time, so please confirm the latest technical and installation details on the manufacturer website https://www.iconcox.com/.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy