EElink - TK319 Features
This page provides a public feature summary for the EElink TK319 and explains how its documented capabilities are used with Plaspy for real time asset and fleet monitoring. It focuses on user facing functions and operational value rather than internal implementation details, and is intended to help fleet managers and technical evaluators understand what the tracker can report and control within the Plaspy platform.
Exact feature availability depends on the TK319 hardware revision, installed firmware, optional accessories, and how the unit is installed and configured. For device specific settings, regional network support, and the latest firmware behavior consult the manufacturer documentation and configuration notes before deployment.
Feature Overview
The TK319 is positioned as a compact 3G GPS tracker suited for vehicle rental, logistics, bus and fleet management, and a range of IoT tracking tasks. It combines satellite and network based location methods to improve locating reliability and supports regular real time reporting over cellular networks to a monitoring platform.
- Dual mode location using GPS and LBS with AGPS assistance for faster fixes
- Real time tracking and periodic data upload via GSM WCDMA cellular networks
- ACC detection to indicate engine ignition state for usage monitoring
- Relay output option to remotely cut engine power where permitted by installation
- Optional temperature sensor with published accuracy for temperature sensitive cargo
- Alerts and alarms including geo fence, speed alarm, and collision or falling alarm
Core Features of EElink - TK319
- GPS LBS double way tracking combining AGPS and cell based location aids
- Real time reporting over 3G cellular networks for continuous visibility
- ACC detection for ignition status reporting and usage analytics
- Relay option to enable remote engine cut off when integrated into vehicle wiring
- Optional external temperature sensor with approximately plus or minus 0.5 degree Celsius accuracy
- Geo fence alarm to notify on entry or exit of predefined areas
- Collision or falling alarm to indicate potential accidents or impacts
- Built in battery with disconnect and low power alarm for backup and tamper awareness
How These Features Work with Plaspy
Plaspy receives and normalizes the telemetry and event information reported by the tracker so users can monitor location, status, and alerts from a single platform. The TK319 can be configured to report events that Plaspy maps to location history, alarms, and device state in the web interface.
- Real time location updates appear on Plaspy maps and location history for route review
- Ignition changes from ACC detection show as device status events for usage tracking
- Geo fence events and speed alarm notifications can generate alerts inside Plaspy for operator attention
- Relay control and remote configuration signals sent from a management platform are reflected as commandable actions when the device and installation support them
- Temperature sensor readings, when present and enabled, are displayed as telemetry values for cargo monitoring and alerting
- Collision or falling alarms are presented as events so operators can prioritize incident response
Typical Use Cases
- Vehicle rental operators tracking vehicle location, ignition status, and tamper alerts
- Logistics and delivery fleets monitoring routes, temperature for sensitive goods, and geofence compliance
- Bus and passenger transport operators maintaining real time visibility of vehicle positions and alarm events
- Risk management teams using ignition and collision alarms to investigate incidents
- General asset monitoring where compact 3G tracking and optional sensors are required
Feature Availability Notes
- Some features such as the temperature sensor and certain GPIO extensions are optional and require the matching hardware or accessory
- Functionality available to Plaspy depends on the device firmware and the configuration applied during installation
- Relay based engine cut off requires correct wiring and may be subject to legal or safety restrictions in some jurisdictions
- Network compatibility for 3G GSM WCDMA depends on regional carrier support and SIM provisioning
- For precise alarm thresholds, sensor accuracy, and event behavior rely on the manufacturer firmware documentation
Why Use Plaspy with These Features
Using the TK319 with Plaspy gives organizations a consolidated view of location, status, and alarm events across a mixed tracker fleet. Plaspy ingests the device reports, normalizes events, and makes them accessible through mapping, alerting, and reporting tools so operational teams can act on timely information.
Plaspy is designed to work with a wide range of trackers and to present location and event data in a consistent way, which helps reduce integration overhead and simplifies fleet oversight. To learn more about Plaspy please visit https://www.plaspy.com. For the most current device specifications, firmware notes, and manufacturer implementation details verify information on the official EElink site https://www.eelink.com.cn/.
Tracker Capabilities
See how these features fit into Plaspy
Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.