Skip to main content

EElink - TK319‑H Features

This page provides a public overview of the EElink TK319‑H features and how those capabilities map to the Plaspy fleet management platform. It focuses on practical, non-sensitive information about what the tracker reports, what alarms it generates, and how that data can be used in Plaspy for monitoring and operational decision making.

Exact feature availability can vary by device firmware, hardware revision, chosen model variant, and installation method. The information below is based on the device description provided by the manufacturer and is intended to describe common capabilities and integration behavior rather than exhaustive or device specific setup instructions.

Feature Overview​

The TK319‑H is a compact 3G vehicle tracker designed for continuous location updates and a set of vehicle safety and telemetry signals that integrate with backend platforms such as Plaspy. It combines satellite and base station positioning with optional expansion interfaces and alarms that support dispatch, anti-theft, and fleet reporting workflows.

  • Real-time GPS tracking with AGPS support and LBS fallback to maintain location visibility in varied signal conditions.
  • ACC ignition detection to distinguish driving versus parked states for reporting and rule triggers.
  • A range of motion and safety alarms including crash, overspeed, vibration, acceleration, and deceleration for incident detection.
  • Serial and GPIO expansion with optional relay and temperature sensor interfaces for custom telemetry and remote control use cases.
  • Compact form factor with wide DC input range and a backup battery to preserve reporting during power interruptions.

Core Features of EElink - TK319‑H​

  • 3G cellular connectivity for location and telemetry reporting over MoveLink / EELINK protocol.
  • GPS positioning with AGPS assistance plus base station LBS fallback.
  • ACC input for ignition status detection and related reporting.
  • Motion and safety alarms covering crash, overspeed, vibration, acceleration, and deceleration events.
  • Serial and GPIO ports for external sensors or telemetry expansion.
  • Optional relay interface enabling remote fuel or power cut-off workflows.
  • Backup battery and low-battery reporting to notify Plaspy when external power is lost.
  • Compact dimensions suitable for discreet vehicle installation.

How These Features Work with Plaspy​

When connected to Plaspy, the TK319‑H sends location, status, and alarm messages that Plaspy ingests to present live views, alerts, and historical records. Plaspy can automatically detect the device protocol and map incoming messages to tracking objects and event triggers so teams can monitor fleets without complex manual configuration.

  • Live position updates appear on Plaspy maps for real time tracking and route visibility.
  • Ignition (ACC) status is used by Plaspy to identify vehicle trip starts and stops and to drive usage reports.
  • Safety and motion alarms are forwarded into Plaspy for immediate notifications, incident logging, and dispatcher workflows.
  • Relay control and remote actions can be incorporated into authorized Plaspy workflows when the relay option is installed and supported by the device configuration.
  • LBS fallback and AGPS-assisted fixes help Plaspy maintain continuity of tracking where GPS reception is limited.

Typical Use Cases​

  • Fleet operations monitoring for routing, utilization, and trip history using continuous GPS and ACC signals.
  • Anti-theft response where alarms and optional relay control support recovery and immobilization workflows.
  • Safety event detection and logging for crash, overspeed, or severe vibration incidents to inform dispatch and investigations.
  • Remote telemetry extensions using serial or GPIO ports to connect auxiliary sensors or inputs.
  • Asset protection in situations with intermittent external power where backup battery alerts preserve visibility.
  • Temperature monitored shipments when an optional temperature sensor is fitted and configured.

Feature Availability Notes​

  • Manufacturer firmware versions can change alarm thresholds, message formats, and available settings; confirm behavior for your firmware build.
  • Hardware revisions and regional model variants may alter supported cellular bands, optional interfaces, or accessory compatibility.
  • Some features such as the relay or temperature sensor are optional hardware items and must be present and enabled to appear in Plaspy.
  • Installation method and vehicle wiring affect signals like ACC detection and power resilience; proper installation is important for reliable reporting.
  • For full technical specifications and the latest compatibility details consult the manufacturer documentation.

Why Use Plaspy with These Features​

Pairing the EElink TK319‑H with Plaspy gives organizations a straightforward path to convert vehicle location, ignition state, and safety alarms into operational insight. Plaspy ingests the TK319‑H telemetry to provide map visualization, event notifications, and historical records that support fleet efficiency, rapid incident response, and asset protection.

Learn more about how Plaspy can present TK319‑H data and support fleet workflows at https://www.plaspy.com. For the most current, device specific specifications, firmware notes, and accessory options consult the manufacturer documentation at https://www.eelink.com.cn/.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy