Skip to main content

Gator - M588T Configuration

This page covers the public configuration context for using the Gator M588T tracker with Plaspy. It consolidates the known, publicly available settings and provides practical guidance on preparing the device to report location and status to the Plaspy platform. Use this guide together with the official Gator documentation for device specific details.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol so you do not need to specify a protocol on the platform side. Exact manufacturer side setup steps can vary by firmware version, hardware revision, installation type, and vendor configuration tools; the examples below reflect the public commands and placeholders commonly provided for the M588T.

Configuration Overview​

This configuration process prepares the M588T to communicate with Plaspy and makes the device visible in the platform. The primary goal is to set the device GPRS/SMS server target, transport, and identification so the tracker sends its telemetry to Plaspy reliably.

  • Point the device to the Plaspy server endpoint and port so location reports arrive at the platform.
  • Supply the device identity and a contact number or admin phone as requested by the tracker configuration flow.
  • Configure GPRS parameters including APN information when required by the SIM provider.
  • Choose the transport option (UDP or TCP) if the device firmware asks for it.
  • Validate the device is reporting to Plaspy and visible in the platform after applying settings.

Plaspy Server Settings​

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support for UDP or TCP
  • Plaspy automatically detects the tracker protocol

These values are the public Plaspy endpoint and port used by all devices on the platform. Plaspy uses the same port for all supported devices and automatically detects the tracker protocol, so providing the server domain or IP and the port on the device is the core requirement.

Typical Requirements Before Setup​

  • A powered and accessible M588T device with correct wiring or power source applied.
  • A working SIM card with an appropriate data plan and the APN details from the mobile operator.
  • Knowledge of the device ID (IMEI) as some commands require including the tracker ID.
  • Access to the manufacturer supported configuration method such as SMS commands or the official configuration tool.
  • The default device password if required for setup (the public example commands below use 123456 as the default password).
  • A phone number for administrative SMS verification when the device configuration includes a contact field.

How This Tracker Connects to Plaspy​

The M588T uses its GSM/GPRS connectivity to send location and event data to the configured server endpoint and port. When set to point at Plaspy, the device will direct its telemetry to the shared Plaspy server endpoint and port for automatic protocol handling by the platform.

  • The tracker reports position updates and alarms to d.plaspy.com or 54.85.159.138 on port 8888.
  • Transport can be UDP or TCP depending on device firmware selection; Plaspy accepts both.
  • Plaspy automatically detects the tracker protocol so no protocol selection is needed in the platform.
  • After successful setup the device becomes visible in Plaspy for live tracking and event monitoring.
  • Regular verification and testing ensure the reporting interval and alarms behave as expected.

Common Configuration Workflow​

  1. Access the official Gator configuration method for the M588T (SMS commands or the Gator configuration tool) as documented by the manufacturer.
  2. Enter the Plaspy server domain d.plaspy.com or the Plaspy server IP 54.85.159.138 into the device server settings.
  3. Set the server port to 8888 on the device.
  4. Choose UDP or TCP on the device if the firmware requires a transport selection.
  5. Provide any required APN settings and the device ID or administrative phone number per the manufacturer command format.
  6. Apply or save the configuration and restart the device if the device requires a reboot to activate changes.
  7. Validate that the device reports to Plaspy and appears in the platform's device list.

Example Configuration Commands​

The M588T can be configured using SMS commands. The publicly available sample commands below use the default device password 123456 and show two variants depending on whether APN username and APN password are required.

  • If your SIM operator requires APN username and APN password include the [apnu] and [apnp] placeholders:
SS,*[apn]*,*[apnu]*,*[apnp]*,*54.85.159.138*,*8888*,*[DeviceID]*,*[phoneNumberUser]*,*123456*
  • If the operator only requires the APN name and not username/password use:
S,*[apn]*,*54.85.159.138*,*8888*,*[DeviceID]*,*[phoneNumberUser]*,*123456*

Placeholders explained:

  • [apn] — the APN name from your mobile operator.
  • [apnu] — APN username when required by the carrier.
  • [apnp] — APN password when required by the carrier.
  • [DeviceID] — the tracker device ID or IMEI as required by the command format.
  • [phoneNumberUser] — your administrative phone number to include in the configuration where requested.

Note: 123456 is shown in the public sample as the device default password. Replace placeholders with your actual values before sending SMS commands.

Configuration Notes​

  • Firmware and regional model variations may change the exact SMS syntax or available parameters; always confirm the syntax with official Gator documentation for your firmware.
  • The M588T supports both SMS based configuration and manufacturer PC tools depending on the vendor provisioning workflow; choose the method that matches your device and installation process.
  • When the device requires a transport selection, test both UDP and TCP to confirm reliable delivery; Plaspy accepts either and will detect the protocol automatically.
  • Keep a record of the device ID and configured admin phone numbers to aid verification and troubleshooting after configuration.
  • Changing the device password from the default is recommended after initial provisioning according to the manufacturer guidance.

Why Use Plaspy with This Configuration​

Using the Gator M588T with Plaspy provides a straightforward way to centralize location reporting and event monitoring across a fleet. By pointing the device to Plaspy's shared server endpoint and port, organizations gain consistent visibility into vehicle position and alarm events without per-device platform configuration.

To learn more about Plaspy and its capabilities visit https://www.plaspy.com. For the latest device specific setup instructions, firmware behavior, and manufacturer details verify information on the official Gator website http://en.gatorgroup.cn.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy