Skip to main content

LK-GPS - LK610-B Configuration

This page covers the public configuration context for using the LK-GPS LK610-B tracker with Plaspy. It summarizes the practical server values and setup workflow used to enable realtime tracking, SOS alerts, and location uploads from this wearable SIM based tracker into Plaspy.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol when the device reports to the platform. Exact manufacturer side setup steps can vary by firmware version, hardware revision, installation type, and vendor configuration tools, so treat the settings here as the public Plaspy values to apply using the LK-GPS configuration method provided by the device vendor.

Configuration Overview​

This configuration ensures the LK610-B can send location and alert data to the Plaspy platform reliably. The public settings below are what you enter in the tracker configuration tool or send via SMS depending on the device variant and manufacturer method.

  • Set the device to report to Plaspy using the shared server endpoint or its IP so data reaches the platform.
  • Configure the device port and transport type to match Plaspy requirements so uploads are accepted.
  • Verify APN and cellular connectivity so the device has a working data path for uploads and alerts.
  • Apply and save settings on the tracker, then confirm the device appears and reports in Plaspy.
  • Test SOS and movement alerts to ensure events and location updates are delivered to the Plaspy account.

Plaspy Server Settings​

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support for UDP or TCP on port 8888
  • Plaspy automatically detects the tracker protocol when the device connects

Typical Requirements Before Setup​

  • An active SIM card with an appropriate data plan installed in the LK610-B variant you are configuring.
  • Charged device battery or power supply and physical access to the tracker for commissioning.
  • Access to the official LK-GPS configuration method such as the vendor web tool, desktop software, or SMS commands.
  • Correct APN and cellular network settings configured on the device so it can establish a GPRS or NB connection as required by the model variant.
  • A Plaspy account with permission to add and view devices so you can validate reporting and alerts.
  • Knowledge of the device model variant (2G or NB variant) to confirm network compatibility.

How This Tracker Connects to Plaspy​

The LK610-B sends its location and event data from the wearable to Plaspy over the cellular network using the configured server endpoint and transport. Plaspy receives those uploads on the shared port and routes them into the platform where protocol detection normalizes the incoming data.

  • Location fixes and LBS assisted data are uploaded to the Plaspy server endpoint d.plaspy.com or 54.85.159.138 on port 8888.
  • SOS button presses and alarm events are transmitted to Plaspy and become actionable alerts in the platform.
  • Regular position uploads or timed reporting modes result in ongoing visibility and history playback inside Plaspy.
  • Plaspy detects the tracker protocol automatically so the same port and endpoint work across supported devices.
  • Two way call events and device status can be correlated in Plaspy for operational monitoring and audit trails.

Common Configuration Workflow​

  1. Access the official LK-GPS configuration method or software provided by the manufacturer, or prepare to use the documented SMS command method.
  2. In the device configuration screen or SMS syntax, enter the Plaspy server as d.plaspy.com or the alternative IP 54.85.159.138.
  3. Set the reporting port to 8888 as the device upload port.
  4. Choose the transport protocol UDP or TCP if the device requires a transport selection; pick the protocol supported by your carrier and device firmware.
  5. Configure APN and any required GPRS settings so the tracker can connect to the cellular network.
  6. Apply or save the configuration and restart the device if required by the manufacturer to activate the new settings.
  7. Validate that the device reports to Plaspy by checking device status and recent location updates in your Plaspy account.

Example Configuration Commands​

The public description for this model does not include a standardized set of manufacturer commands in this document. Exact configuration commands and SMS syntax vary by LK-GPS firmware and vendor tooling. In practice you will set the server to d.plaspy.com or 54.85.159.138 and the port to 8888 using the LK-GPS configuration utility or the device SMS commands documented by LK-GPS.

For the precise SMS or software command format, consult the official LK-GPS configuration guide supplied with the device or the manufacturer documentation at their website. Use the server domain or IP and port 8888 in those commands or tool fields and select UDP or TCP as required.

Configuration Notes​

  • Plaspy uses the same port 8888 for all supported devices and automatically performs protocol detection, so the device only needs the correct server and port to begin reporting.
  • Firmware revisions can change the exact configuration menu, SMS syntax, or available transport options; always check the LK-GPS documentation for your device firmware version.
  • If the device supports both SMS and software configuration, SMS can be useful for field commissioning while software tools may provide more options.
  • Choose UDP or TCP according to the device capability and network environment; some installers prefer UDP for lower overhead while others use TCP for reliable delivery depending on the tracker firmware.
  • Verify APN and carrier compatibility for the specific LK610-B variant you have, particularly between 2G and NB variants.

Why Use Plaspy with This Configuration​

Using the LK610-B with Plaspy provides a straightforward way to bring wearable personal safety tracking into a centralized monitoring platform. Organizations gain continuous visibility, SOS and geo fence alerts, and playback of historical routes while keeping field commissioning simple through SMS or vendor tools.

To learn more about Plaspy and platform capabilities visit https://www.plaspy.com. For the most current device specific configuration steps, firmware notes, and command syntax refer to the manufacturer documentation at https://www.lk-gps.com.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy