Skip to main content

Navtelekom - ASN SIGNAL S-4752 + SIM AO "GLONASS" Configuration

This page covers the public configuration context for using the Navtelekom ASN SIGNAL S-4752 with a preinstalled SIM from AO "GLONASS" on Plaspy. It explains the shared Plaspy server settings, the typical setup workflow and the practical steps you will use when preparing the device for real time tracking. The goal is to help installers and integrators apply the public values required by Plaspy so the device can report location and telemetry reliably.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol, while exact manufacturer side setup steps can vary by firmware, hardware revision, installation type, and vendor tools. Use this guide together with the official Navtelekom documentation and the NTC Configurator tool supplied by the manufacturer to complete device specific configuration and registration tasks.

Configuration Overview​

Before connecting the ASN SIGNAL S-4752 to Plaspy you will prepare the device to send telemetry to the Plaspy endpoint, confirm cellular connectivity from the supplied SIM and validate that the tracker is visible on the Plaspy platform. The public configuration process focuses on pointing the unit at the Plaspy server endpoint and confirming transport settings.

  • Configure the device server endpoint to the Plaspy server so telemetry is routed to the platform.
  • Select and confirm the transport protocol (UDP or TCP) and the shared Plaspy port.
  • Validate cellular connectivity and that the preinstalled AO "GLONASS" SIM can reach the Plaspy server.
  • Save and apply settings in the manufacturer configuration tool, then confirm the device appears in Plaspy.
  • Test basic telemetry and event reporting to ensure real time visibility.

Plaspy Server Settings​

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support for UDP or TCP depending on device configuration options
  • Plaspy automatically detects the tracker protocol and uses the same port for all supported devices

Typical Requirements Before Setup​

  • Ensure the ASN SIGNAL S-4752 power supply is connected and the device has stable vehicle power or bench power for initial configuration.
  • Confirm the preinstalled AO "GLONASS" SIM is active and registered with the mobile operator.
  • Have access to the official manufacturer configuration method such as the NTC Configurator software or the device web/serial interface provided by Navtelekom.
  • Ensure you have the unit serial number and any required registration credentials for AO "GLONASS" or your operator portal.
  • If using local logging or microSD, confirm the card is formatted and inserted if needed for buffering during connectivity loss.
  • Prepare diagnostic tools or logs for validation after configuration, such as the device status view in NTC Configurator.

How This Tracker Connects to Plaspy​

When configured for Plaspy, the ASN SIGNAL S-4752 sends GNSS positions and vehicle telemetry from its modem and onboard interfaces to the shared Plaspy endpoint and port. Plaspy receives the stream, automatically detects the tracker protocol, and makes vehicle location and event data available in the platform for real time tracking and reporting.

  • The device is configured to report to the Plaspy server endpoint at d.plaspy.com (or 54.85.159.138) on port 8888.
  • Transport is selected as either UDP or TCP depending on installer preference and device options.
  • Plaspy automatically detects the tracker protocol so no device specific protocol selection is required in Plaspy itself.
  • Regular position updates and event messages are forwarded to Plaspy for visibility and alerting.
  • Local logging on microSD provides buffering during temporary network interruptions and resumes upload when connectivity returns.

Common Configuration Workflow​

  1. Access the official manufacturer configuration method or software such as NTC Configurator or the device management interface.
  2. In the server or APN settings, enter d.plaspy.com or the direct server IP 54.85.159.138 as the endpoint for telemetry.
  3. Set the remote port to 8888 which is the shared Plaspy port for all devices.
  4. Choose UDP or TCP transport if the device requires you to select a transport protocol.
  5. Apply or save the configuration in the manufacturer tool and push settings to the device.
  6. Restart the device if required by the firmware or configuration tool to activate the new server settings.
  7. Validate that the device reports to Plaspy by checking device connectivity and incoming telemetry in the Plaspy platform.

Example Configuration Commands​

The ASN SIGNAL S-4752 is typically configured using Navtelekom tools such as NTC Configurator or the device management interface. Exact configuration commands and the user interface flow vary by firmware version and the manufacturer tool. For this reason no single set of universal commands is provided here; instead use the manufacturer software to set the server domain to d.plaspy.com or the IP 54.85.159.138 and the port to 8888, choosing UDP or TCP as appropriate. Refer to the Navtelekom configuration guide or NTC Configurator help for command line or SMS based instructions that match your firmware revision.

Configuration Notes​

  • Plaspy uses the same port 8888 for all supported devices and automatically detects the tracker protocol, so focus on entering the correct server endpoint and transport on the device.
  • Firmware and hardware revisions can change configuration menus or command syntax; always confirm the exact steps for your unit with Navtelekom documentation.
  • Choosing UDP may reduce overhead for frequent position updates while TCP can provide session reliability depending on your operational needs and network conditions.
  • If the unit was supplied preconfigured for ERA GLONASS or with an AO "GLONASS" SIM, verify operator registration steps required by the vendor before full deployment.
  • Keep a record of applied settings and device identifiers to speed onboarding and troubleshooting when validating device visibility in Plaspy.

Why Use Plaspy with This Configuration​

Using the ASN SIGNAL S-4752 with Plaspy provides organizations a straightforward route to bring certified ERA GLONASS capable hardware onto a unified tracking platform. The preinstalled AO "GLONASS" SIM and Navtelekom configuration tools simplify initial setup while Plaspy’s shared server settings and automatic protocol detection reduce per device complexity during mass deployments.

To learn more about Plaspy and platform capabilities visit https://www.plaspy.com. For the latest device specific configuration methods, firmware notes, and official Navtelekom documentation please verify details at https://www.navtelecom.ru/ as manufacturer specifications and setup procedures can change over time.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy