Skip to main content

Navtelekom - СИГНАЛ S-2613 Features

This page describes the public feature context for using the Navtelekom СИГНАЛ S-2613 tracker with Plaspy. It focuses on practical capabilities, how the device feeds data into Plaspy, and what fleet managers and integrators can expect when using the S-2613 as part of a Plaspy-managed solution.

Exact feature availability and behavior can vary by firmware version, hardware revision, regional variant and installation method. The descriptions below are based on the device information provided by the manufacturer and should be treated as a functional overview rather than an exhaustive technical specification.

Feature Overview​

The СИГНАЛ S-2613 is an entry level professional tracker designed for reliable vehicle and asset monitoring where stable satellite positioning, robust power handling and flexible I O are important. It is intended to provide continuous GNSS positioning, basic telemetry, and local connectivity options while integrating directly with Plaspy for visualization and alerting.

  • Stable GLONASS and GPS positioning with external GNSS antenna for real time location.
  • 2G GSM modem with a single SIM slot for cellular connectivity in supported regions.
  • Backup power and input protection for continuity of tracking during power events.
  • Multiple digital and analog inputs plus driver outputs to capture alarms and control external equipment.
  • RS 485 interface and Bluetooth 4.0 for local sensor integration and hands free audio.

Core Features of Navtelekom - СИГНАЛ S-2613​

  • GLONASS and GPS positioning with external antenna support for consistent satellite reception.
  • 2G GSM modem and single SIM slot for cellular reporting in areas with GSM coverage.
  • External GNSS and GSM antennas to improve signal reliability in vehicle installations.
  • Power input protection up to 200 V and an integrated 800 mAh Li Po backup battery for power loss continuity.
  • Four discrete digital inputs, one analog input and four driver control outputs for monitoring and control.
  • RS 485 interface for integration with external telemetry devices and controllers.
  • Bluetooth 4.0 for local sensor pairing and a hands free speakerphone for voice communication.
  • Support for local and remote configuration workflows via manufacturer tools such as NTC Configurator and DRC.

How These Features Work with Plaspy​

When the СИГНАЛ S-2613 is connected to Plaspy, position and telemetry reports are ingested into the platform to support live monitoring, historical reports and event driven alerts. Plaspy presents device-generated data in dashboards and workflows so operations teams can act on location and input state changes.

  • Real time location updates and history visualization using GNSS coordinates and timestamps.
  • Event reporting for digital inputs to show alarms, door events or ignition state changes inside Plaspy.
  • Analog input and RS 485 data presented as telemetry values when properly configured and mapped.
  • Remote control actions and output state visibility so operators can track outputs and issue commands where supported by installation and safety policies.
  • Alerts, geofences and automated reports that reference device events and telemetry captured from the S 2613.

Typical Use Cases​

  • Fleet tracking for light and medium vehicles with continuous GNSS position and history reporting.
  • Cargo and asset monitoring where backup battery ensures tracking during temporary power loss.
  • Anti theft monitoring and alarm workflows using digital inputs and remote output control.
  • Integration with on board controllers and sensors via RS 485 for additional operational telemetry.
  • Local sensor pairing and voice alerts using Bluetooth and the hands free speakerphone.
  • Industrial equipment oversight where robust power protection is required.

Feature Availability Notes​

  • Feature presence and exact behavior depend on the device firmware version and manufacturer configuration.
  • Hardware revisions and regional variants can affect supported cellular bands and available interfaces.
  • Installation wiring and the way inputs and outputs are used will determine which functions are operational on a specific vehicle or asset.
  • Some advanced telemetry or control behaviors require correct mapping and configuration in Plaspy and the device configuration tools.
  • Always consult the device passport and manufacturer documentation for the definitive list of supported functions for your unit.

Why Use Plaspy with These Features​

Plaspy provides a centralized platform to visualize location, correlate telemetry, and automate alerts for devices such as the СИГНАЛ S-2613. Using Plaspy, organizations gain operational oversight through live maps, historical traces and event driven workflows that make the S-2613's position and input data actionable across fleet and asset management teams.

Learn more about how Plaspy can be used with the Navtelekom СИГНАЛ S-2613 on the Plaspy website https://www.plaspy.com. For the most current and detailed device specifications, firmware notes and regional variations verify information on the manufacturer site https://www.navtelecom.ru/ since device features and firmware behavior can change over time.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy