Skip to main content

Navtelekom - SMART S-2420 Features

This page provides a public overview of the Navtelekom SMART S-2420 feature set and how those features are used when the device is connected to Plaspy. It focuses on user-facing capabilities, practical functions, and the typical ways the tracker reports location and basic telemetry to the Plaspy platform.

Exact feature availability can vary by firmware version, hardware revision, regional variant, and the specifics of installation. Where appropriate this page highlights the device capabilities described in Navtelekom materials while encouraging verification against manufacturer documentation for the most current details.

Feature Overview​

The SMART S-2420 is an entry level GLONASS/GPS vehicle tracker intended for permanent vehicle installations that require straightforward positioning, basic telemetry, and simple remote control. Its integrated antennas and compact design aim to reduce installation complexity while providing the core inputs and outputs needed for common fleet and anti-theft scenarios.

  • Integrated sensitive GLONASS/GPS and GSM antennas to simplify installation without external antenna runs.
  • Single SIM 2G modem for position and telemetry uplink where 2G networks remain available.
  • Bluetooth 4.0 for local configuration and setup using a mobile or field tool.
  • Three universal configurable inputs for digital sensor signals and ignition detection.
  • Two control outputs to operate relays or remote immobilizer circuits for basic remote control.
  • Hardware power protection and input line protection rated up to 200 V for vehicle electrical environments.

Core Features of Navtelekom - SMART S-2420​

  • GLONASS/GPS positioning with integrated high sensitivity antennas for reliable fixes in typical vehicle environments.
  • 2G GSM modem with single SIM support for transmitting location and telemetry to cloud platforms.
  • Bluetooth 4.0 interface for local configuration and diagnostics during installation or maintenance.
  • Three universal configurable inputs that can be mapped to digital sensors or ignition state.
  • Two configurable control outputs intended for relay control and remote actuator functions.
  • No internal battery; designed for permanent installation on vehicle power.
  • Built-in power and input-line protection to handle automotive electrical conditions.
  • Archived model status with documentation and firmware history available through Navtelekom resources.

How These Features Work with Plaspy​

Plaspy receives the SMART S-2420 telemetry and makes the device's location and digital I/O state visible in the platform for monitoring and reporting. Plaspy automatically detects the tracker protocol and exposes the incoming data so fleet operators can use it alongside other devices managed in Plaspy.

  • Location updates and basic telemetry reported into Plaspy for mapping and route history.
  • Ignition and digital input events shown in Plaspy as state changes to support engine on/off and door or alarm monitoring.
  • Control outputs can be triggered via Plaspy workflows where remote actuation is required and properly wired.
  • Bluetooth remains available for local field configuration; Plaspy uses the device uplink for cloud visibility rather than local Bluetooth connections.
  • Archived model considerations such as firmware availability and regional 2G service are reflected in Plaspy planning and deployment decisions.

Typical Use Cases​

  • Low-cost fleet tracking and route logging for light commercial vehicles where basic positioning and telemetry are required.
  • Anti-theft workflows using remote relay or immobilizer control combined with location reporting.
  • Ignition and status monitoring for event-driven alerts and driver activity tracking.
  • Simple fuel or auxiliary sensor monitoring when compatible sensors are connected to the universal inputs and mapped in Plaspy.
  • Permanent vehicle installations where a compact tracker with integrated antennas simplifies wiring and installation.

Feature Availability Notes​

  • The SMART S-2420 is an archived model; firmware updates and active support are limited compared with current product lines.
  • Regional 2G network availability varies; confirm cellular service for the specific deployment region before using the device for real-time tracking.
  • Behavior and available telemetry can depend on firmware version and the hardware revision shipped to your region.
  • Installation wiring (power, inputs, and outputs) affects which features are available; professional installation is recommended for actuator and immobilizer functions.
  • Always consult Navtelekom documentation for precise technical specifications and any device-specific configuration steps.

Why Use Plaspy with These Features​

Using the SMART S-2420 with Plaspy gives organizations a straightforward way to centralize basic vehicle location, input state monitoring, and remote control actions into a single fleet management view. Plaspy normalizes device data, presents location and event information on maps and reports, and helps operators manage mixed fleets that include entry level trackers like the S-2420.

If you want to learn more about how Plaspy can integrate with Navtelekom devices and support your tracking workflows, visit https://www.plaspy.com. For the latest device specific details, firmware history, and official technical documentation, please verify current information on the manufacturer site https://www.navtelecom.ru/. Device features, firmware behavior, and manufacturer details can change over time, so confirming the most recent specifications with the manufacturer is recommended.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy