Skip to main content

Navtelekom - СМАРТ S-2435 Configuration

This page covers the public configuration context for using the Navtelekom СМАРТ S-2435 tracker with Plaspy. It describes the shared server settings Plaspy expects, practical setup guidance, and the common steps needed to prepare the device for integration. The guidance here is based on public compatibility information and the S-2435 product description.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol when data arrives. Exact manufacturer-side setup steps can vary by firmware version, hardware revision, installation type, and vendor tools such as NTC Configurator or the vendor DRC management system. Always confirm device-specific procedures with Navtelekom documentation when available.

Configuration Overview​

This configuration prepares the СМАРТ S-2435 to report location and telemetry to Plaspy using the platform's shared server endpoint and port. The focus is on configuring the device uplink settings, selecting transport, saving the configuration, and validating that data arrives in Plaspy.

  • Point the tracker to the Plaspy server endpoint so uplink packets route to Plaspy for ingestion.
  • Configure the tracker transport (UDP or TCP) on the port Plaspy uses so the device can establish a channel to the platform.
  • Save and apply the manufacturer configuration using the official tool or SMS/serial methods supported by the device.
  • Restart or cycle power on the tracker if required by the device firmware to activate new network settings.
  • Confirm the device appears in Plaspy and that real-time position and basic telemetry are visible.

Plaspy Server Settings​

  • Server domain: d.plaspy.com
  • Server IP: 54.85.159.138
  • Port: 8888
  • Transport: the tracker may be configured using UDP or TCP on port 8888
  • Plaspy automatically detects the tracker protocol when data arrives and all devices in Plaspy use the same port 8888

Typical Requirements Before Setup​

  • Access to the official Navtelekom configuration method or software such as NTC Configurator or the vendor tools provided by Navtelekom.
  • Installed and activated SIM cards compatible with the device dual SIM 2G modem, with mobile data enabled for uplink.
  • Reliable power or the device internal battery charged and connected as needed for configuration and testing.
  • Physical access to the device or local Bluetooth connection if local configuration is performed via Bluetooth 4.0.
  • A record of the device IMEI or identifier so you can confirm the correct unit shows up in Plaspy once reporting.
  • Network coverage on the selected cellular carrier to allow packet delivery to d.plaspy.com or 54.85.159.138.

How This Tracker Connects to Plaspy​

The СМАРТ S-2435 sends GNSS position and telemetry over its cellular uplink to the Plaspy server endpoint. Plaspy ingests the incoming data stream, automatically detects the protocol, and makes the device visible in the platform for real-time tracking, alerts, and reporting.

  • Configure the device uplink to target d.plaspy.com or the IP 54.85.159.138 on port 8888.
  • Select UDP or TCP transport according to the device configuration options; Plaspy accepts both on port 8888.
  • The tracker transmits GNSS fixes and configured telemetry to Plaspy where protocol parsing is applied automatically.
  • Once reporting begins, Plaspy provides live position, historical playback, and event-driven notifications.
  • Use Plaspy platform features to map inputs, outputs, and telemetry fields exposed by the S-2435.

Common Configuration Workflow​

  1. Access the official manufacturer configuration method or software (for example NTC Configurator or vendor-provided tools).
  2. Enter the Plaspy server address using either d.plaspy.com or 54.85.159.138 as the destination.
  3. Set the port to 8888, noting that Plaspy uses the same port for all supported devices.
  4. Choose UDP or TCP if the device requires a transport selection and save that option.
  5. Apply or save the configuration to the tracker using the manufacturer tool or supported update channel.
  6. Restart the device or cycle power if the device firmware requires a reboot to activate new settings.
  7. Validate that the device reports to Plaspy by checking that it appears in the Plaspy platform and that position updates and basic telemetry are received.

Example Configuration Commands​

No public, device-specific command strings are included in this page. Exact configuration commands and methods for the СМАРТ S-2435 vary by manufacturer tool, firmware version, and the configuration channel you use (desktop configurator, Bluetooth, or remote management). When using the vendor NTC Configurator or an SMS-based workflow, follow the official Navtelekom procedure to set:

  • Server domain or IP: d.plaspy.com or 54.85.159.138
  • Port: 8888
  • Transport: UDP or TCP

If you obtain a manufacturer command list or sample SMS commands from Navtelekom, apply those commands in the order recommended by the vendor and verify that the device begins reporting to Plaspy at the configured endpoint.

Configuration Notes​

  • Firmware differences and hardware revisions can change available menu items, command syntax, or whether a reboot is required after saving settings.
  • Choose UDP or TCP based on the device options; Plaspy accepts both on port 8888 and will auto-detect the device protocol.
  • Use the official Navtelekom tools such as NTC Configurator or the vendor DRC remote management system for reliable updates and firmware management.
  • Ensure both SIM slots and carriers are provisioned correctly if you plan to use dual SIM redundancy for continuous connectivity.
  • Keep a record of the device IMEI and any applied configuration changes to assist troubleshooting when validating presence in Plaspy.

Why Use Plaspy with This Configuration​

Integrating the Navtelekom СМАРТ S-2435 with Plaspy gives fleets and operators a straightforward path to real-time visibility and device telemetry. The S-2435’s high-sensitivity GLONASS/GPS receiver, dual SIM cellular redundancy, internal battery backup, and extensive I/O make it well suited for fleet tracking, anti-theft monitoring, and telemetry-driven workflows when paired with Plaspy’s platform capabilities.

To learn more about Plaspy and platform features, visit https://www.plaspy.com. For the latest device-specific setup details, firmware behavior, and official configuration tools from the manufacturer, verify current documentation at https://www.navtelecom.ru/

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy