Skip to main content

Navtelekom - START S-2013 Features

This page provides a public overview of the Navtelekom START S-2013 features as they relate to use with Plaspy. It focuses on practical, non sensitive details about what the tracker can report and how it integrates into Plaspy for real time tracking, telemetry forwarding, and event visibility.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation method, and the manufacturer's implementation choices. For device specific wiring diagrams, firmware notes, and the most current technical details consult Navtelekom documentation.

Feature Overview​

The START S-2013 is a compact GLONASS and GPS vehicle tracker designed for discreet installations where minimal external wiring is desirable. It combines positioning, basic I O connectivity, and multiple sensor interfaces to deliver location and telemetry for fleet and asset monitoring.

  • Compact form factor with internal GLONASS and GPS antennas for unobtrusive vehicle and equipment installation
  • GSM 2G data connectivity for sending GNSS positions and telemetry to Plaspy for real time monitoring
  • Built in backup Li Ion battery and USB Type C connector for reliable power handling and simple commissioning
  • Bluetooth 4.0 support for short range wireless sensors and device pairing
  • RS 485 interface plus configurable discrete and analog inputs to capture external sensor and controller data
  • Robust electrical protection to tolerate common vehicle power transients

Core Features of Navtelekom - START S-2013​

  • Integrated GLONASS and GPS positioning for reliable location reporting
  • GSM 2G modem for telemetry uplink to fleet servers and platforms
  • Internal antennas to support compact and hidden installations
  • Built in backup battery to maintain operation during brief power interruptions
  • USB Type C port for device setup and charging
  • Bluetooth 4.0 for connectivity to compatible wireless sensors and mobile devices
  • RS 485 serial interface for external telemetry and controller integration
  • Configurable I O set including digital inputs, an analog input, and a control output

How These Features Work with Plaspy​

Plaspy ingests the START S-2013 telemetry and location messages to present live vehicle positions, event markers, and consolidated historical reports. The tracker’s sensor and input capabilities allow Plaspy to surface operational signals alongside location data for clearer situational awareness.

  • Real time GNSS positions and telemetry appear in Plaspy for live tracking and historical playback
  • Discrete inputs and the analog input can be mapped to events in Plaspy for door status, alarms, or other signals
  • RS 485 sourced telemetry can be forwarded to Plaspy where supported telemetry fields are available for reporting
  • Bluetooth connected sensors allow short range environmental or auxiliary data to be relayed into Plaspy
  • Control output events and related status can be represented in Plaspy dashboards and logs once configured

Typical Use Cases​

  • Discreet vehicle tracking for light commercial fleets where a compact installation is required
  • Fuel level and consumption monitoring using wired or wireless sensors integrated via the tracker
  • Temperature sensitive deliveries and asset monitoring using paired Bluetooth environmental sensors
  • Equipment and compact vehicle tracking for construction, municipal, or rental fleets
  • Remote control actions and immobilizer scenarios when the control output is configured with Plaspy workflows
  • Aggregation of controller data via RS 485 for consolidated telemetry reporting

Feature Availability Notes​

  • Firmware versions and hardware revisions may enable or limit specific features and interfaces
  • Regional cellular band support and 2G availability depend on the device variant and local mobile networks
  • Bluetooth sensor compatibility is determined by the sensor profile and manufacturer implementation
  • RS 485 integration requires matching protocols and configuration for connected devices to report useful telemetry
  • Installation type and wiring choices influence which inputs and outputs are available for use with Plaspy

Why Use Plaspy with These Features​

Using the START S-2013 with Plaspy gives fleet managers a straightforward path from discreet hardware to actionable fleet insights. The tracker’s compact design and mix of wired and wireless interfaces make it suitable for installations where space is limited but telemetry needs remain diverse. Plaspy brings those inputs together into a single monitoring environment for location awareness, event tracking, and historical analysis.

Learn more about how Plaspy can work with devices like the Navtelekom START S-2013 at https://www.plaspy.com. For the latest device specifications, firmware behavior, and manufacturer details verify current information on the official Navtelekom site https://www.navtelecom.ru/.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy