Skip to main content

SinoTrack - AL-900C Features

This page provides a public feature summary for the SinoTrack AL-900C and how those capabilities are used with Plaspy for location monitoring and operational visibility. It is intended to explain the practical functions and value you can expect when an AL-900C is connected to the Plaspy platform, without covering private configuration or manufacturer proprietary details.

Exact feature availability for any individual AL-900C unit can vary by firmware version, hardware revision, regional variant and installation method. Where the device supports configuration via platform or SMS, Plaspy can reflect those settings, but you should check the device firmware release notes and manufacturer documentation for the most current device specific behavior.

Feature Overview​

The AL-900C is a vehicle oriented GPS tracker that emphasizes durable operation, multiple reporting options, and a range of input and output interfaces for monitoring and control. In Plaspy, these capabilities translate into map location updates, event visibility, and configurable reporting intervals to match operational requirements.

  • Rugged environmental ratings and wide operating temperature range for reliable outdoor vehicle use
  • Quad band GSM and GPRS support for broad cellular connectivity and configurable GPRS reporting
  • SIRF IV GPS receiver with multi channel reception for consistent position fixes
  • Multiple alarm types including over speed, SOS and main power on off for rapid event detection
  • Discrete inputs and outputs plus relay control to connect sensors and enable remote control actions
  • Built in microphone and two way voice capability for authorized listening and driver communication

Core Features of SinoTrack - AL-900C​

  • Wide operating temperature range reported at -15°C to 80°C for operation in varied climates
  • IP53 protection degree for dust resistance and protection against water splashes
  • Quad band GSM support for 850 900 1800 1900 MHz coverage and GPRS multi slot class 10
  • SIRF IV GPS module with 20 channels and high sensitivity for position acquisition and tracking
  • Location reporting options including SMS location, real time tracking and GPRS interval reporting
  • Alarm support for events such as over speed, SOS and main power on and off
  • Inputs and sensors support including ACC, door sensor, shock sensor and fuel sensor
  • Remote control through relays and two way voice with external microphone and speaker, plus authorized remote listening

How These Features Work with Plaspy​

When an AL-900C is used with Plaspy, its reported positions and events become part of a unified monitoring view. Plaspy automatically detects the tracker protocol and can accept device reports, allowing operations teams to see location history and live events alongside other fleet assets.

  • Map location updates and position history based on the device GPS fixes and GPRS or SMS reporting
  • Event generation in Plaspy for alarms like SOS, over speed and main power on off for immediate visibility
  • Sensor state and input changes (ACC, door, shock, fuel sensor signals) shown as events or status indicators
  • Remote control actions and configuration when supported by the device and enabled through the platform or SMS commands
  • Two way voice and authorized listening capability indicated in device documentation and managed per deployment policies
  • Plaspy can accept TCP or UDP reports from compatible devices and will process messages according to the tracker protocol

Typical Use Cases​

  • Fleet vehicle tracking for route oversight and historical location reporting
  • Security monitoring with SOS alerts and power loss detection for theft response
  • Remote monitoring of door, shock and fuel sensor inputs for operational awareness
  • Situations requiring durable tracking hardware that operates across a wide temperature range
  • Driver communication scenarios using two way voice or authorized listening as part of dispatch procedures
  • Remote control of vehicle systems where relay control is appropriate and authorized

Feature Availability Notes​

  • Some features depend on the installed firmware version and may be added or altered by manufacturer updates
  • Hardware revisions or regional variants may affect sensor availability and cellular band support
  • Certain functions require proper installation and wiring to expose ACC, door, shock or fuel sensor inputs
  • Remote audio and relay control features may be subject to local regulations and should be used following applicable rules
  • Verify platform based configuration capabilities for your device model before relying on remote parameter changes

Why Use Plaspy with These Features​

Using Plaspy with the SinoTrack AL-900C provides a single place to view location, alarms, and input state for vehicles equipped with this tracker. Plaspy collects and normalizes incoming reports so operations teams can monitor live position, receive alerts, and review historical movement for planning and incident response.

To learn more about Plaspy and how it can manage devices like the AL-900C visit https://www.plaspy.com. For the most current device specifications, firmware notes and manufacturer guidance please consult the official SinoTrack site at https://www.sinotrackgps.com/ since device features and implementation details can change with new firmware and hardware revisions.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy