Skip to main content

SinoTrack - ST-902L Features

This page provides a public, features-focused summary of the SinoTrack ST-902L and how its capabilities are used with Plaspy. It covers the practical, non-sensitive features you can expect when integrating the ST-902L with Plaspy for real time location, event reporting, and fleet oversight.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation type, regional variant, and manufacturer settings. Always verify device-specific behavior against the official SinoTrack documentation and release notes when planning deployment or relying on particular alarms or reports.

Feature Overview​

The ST-902L is a compact OBD II plug-in tracker designed for cars and light vehicles. It provides GNSS position fixes, cellular connectivity, and event reporting from the vehicle without hardwiring, making it suited for quick deployments and fleet rollouts.

  • Plug-and-play 16-pin OBD II installation for fast onboarding of vehicles without rewiring.
  • Real-time GNSS position reporting for continuous location visibility using a UBLOX7020 GNSS receiver.
  • Cellular connectivity over 4G LTE and GSM/GPRS for live tracking and SMS configuration as a fallback.
  • Built-in backup battery and tamper detection to capture events when OBD power is removed.
  • Configurable server address via SMS or manufacturer setup so the device can forward data to Plaspy.
  • Support for common event types such as geo-fence, over-speed, shock, and low battery notifications.

Core Features of SinoTrack - ST-902L​

  • OBD II plug-in form factor for noninvasive installation in cars and light vehicles.
  • UBLOX7020 GNSS module providing consistent position fixes and typical location accuracy around 10 meters.
  • 4G LTE and GSM/GPRS cellular reporting with SMS command support for configuration and provisioning.
  • Backup battery for limited off-power operation and tamper detection when the device is disconnected.
  • Event and alarm reporting including geo-fence, over-speed, shock, and low battery notifications.
  • SMS-based APN and server parameter configuration to enable rapid integration with tracking platforms.
  • Compatibility with the manufacturer’s PRO app and web portal for alternate device management and activation.

How These Features Work with Plaspy​

When pointed at Plaspy, the ST-902L forwards location and event data to the Plaspy platform for real-time monitoring, historical playback, and fleet reporting. Plaspy detects supported tracker protocols and surfaces incoming telemetry and alarms in dashboards and reports.

  • Point the device to Plaspy’s ingestion endpoint and the ST-902L will stream position updates and alarms into Plaspy.
  • Geo-fence and over-speed events from the device appear as events in Plaspy dashboards and can trigger notifications.
  • Tamper and low battery alerts are delivered as actionable events so operations teams can respond to potential theft or power loss.
  • SMS configuration or manufacturer setup is useful for setting APN and server parameters during provisioning before device registration in Plaspy.
  • Plaspy’s platform shows live location, trip history, and event timelines for each ST-902L equipped vehicle.

Typical Use Cases​

  • Rapid fleet deployment where OBD II plug-and-play installation reduces installation cost and time.
  • Anti-theft monitoring with tamper detection and backup battery alerts to notify managers if a device is disconnected.
  • Driver oversight and safety monitoring using over-speed and shock event reporting.
  • Rental and lease vehicle tracking for location logging and return inspections without permanent wiring changes.
  • Basic compliance and route logging to support record keeping and trip history review.

Feature Availability Notes​

  • Firmware level and manufacturer configuration can change available commands, alarm thresholds, and reporting intervals.
  • Hardware revisions and regional cellular band variants may affect connectivity in some markets; confirm band support with the manufacturer for your region.
  • Some features require correct APN and SIM provisioning; a local data SIM is not included and must be configured.
  • Manufacturer apps, portals, or account services may provide additional capabilities that are separate from Plaspy integration.
  • Always consult the latest SinoTrack user manual and firmware release notes for detailed device commands and configuration steps.

Why Use Plaspy with These Features​

Pairing the ST-902L with Plaspy gives operations teams a fast path from device provisioning to operational visibility. The plug-and-play OBD II form factor simplifies installation while the device’s event reporting and GNSS performance provide the location and alarm signals Plaspy needs to deliver real-time tracking, historical analysis, and fleet reporting.

To learn more about how Plaspy supports trackers like the ST-902L and to explore deployment options, visit https://www.plaspy.com. For the most current device specifications, firmware details, and manufacturer configuration commands, verify information on the official SinoTrack website https://www.sinotrackgps.com/

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy