Skip to main content

Teltonika - FMB110 Features

This page provides a public feature overview for the Teltonika FMB110 and describes how its capabilities map to Plaspy for vehicle tracking, sensor telemetry, and basic anti theft workflows. It focuses on practical, non sensitive details useful for fleet managers, integrators, and technical reviewers considering the FMB110 for deployment with Plaspy.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation choices, and manufacturer implementation. For device specific technical constraints, advanced configuration options, or firmware change logs, consult Teltonika documentation and firmware resources.

Feature Overview​

The FMB110 is a compact 2G GPS tracker designed to provide reliable real time position reporting and fundamental telematics for mixed vehicle fleets. Its internal antennas and modest I O options make it suitable for clean vehicle installations while supporting temperature sensing, RFID or iButton based identification, BLE sensors, and remote engine blocking where required.

  • Real time GNSS location reporting over 2G GSM networks for position tracking and route visibility.
  • 1 Wire support for DS18B20 temperature probes and iButton or RFID tag reading for driver or asset identification.
  • Bluetooth Low Energy connectivity for pairing external beacons and wireless sensors such as temperature or humidity probes.
  • Remote engine blocking immobilizer support to assist anti theft and access control workflows.
  • Compact form factor with internal cellular and GNSS antennas to simplify installation and reduce external antenna routing.

Core Features of Teltonika - FMB110​

  • 2G GSM cellular connectivity supporting common GSM bands for telemetry uplink and command reception.
  • Internal GNSS antenna for position acquisition and periodic reporting.
  • 1 Wire interface compatible with DS18B20 temperature probes and iButton or RFID tag readers.
  • Bluetooth Low Energy support to integrate external sensors and beacons for environmental or tamper monitoring.
  • Remote engine blocking immobilizer control for anti theft and fleet access scenarios.
  • Standard packaging and cabling options to facilitate provisioning and bulk deployment.
  • Remote management support via Teltonika tools for firmware updates and configuration.

How These Features Work with Plaspy​

When the FMB110 is connected to Plaspy, its location and supported telemetry stream into Plaspy dashboards, alerts, and historical reports. Plaspy automatically detects many tracker protocols and displays incoming position and sensor data for operational oversight, while providing alerting and reporting that leverage the device capabilities.

  • Real time position and movement appear on Plaspy maps for live fleet visibility and route playback.
  • Temperature readings from DS18B20 probes can be logged and charted in Plaspy for cold chain monitoring and alerting.
  • iButton or RFID tag reads are usable in Plaspy to record driver identification events or access logs.
  • BLE sensor inputs and beacon state changes can surface as telemetry or events inside Plaspy when paired and routed through the tracker.
  • Immobilizer state and control commands can be monitored and used within Plaspy workflows to support anti theft procedures and access control.

Typical Use Cases​

  • Fleet location tracking and historical route analysis for delivery and service vehicles.
  • Cold chain monitoring with external DS18B20 probes to log load temperatures during transit.
  • Car sharing and controlled access using iButton or RFID tag reads to associate drivers with trips.
  • Anti theft operations combining real time location with remote immobilizer control and alerts.
  • Adding BLE sensor telemetry for trailer or cargo environmental monitoring and tamper detection.

Feature Availability Notes​

  • Firmware matters: features such as BLE behavior, immobilizer control, and sensor handling depend on device firmware and Teltonika configuration.
  • Hardware revisions and SKU variants can change available connectors, included cables, and packaging quantities.
  • Installation choices affect capability: some features require specific wiring or external probes and antennas to be present and installed correctly.
  • Regional cellular banding and carrier support for 2G may vary by market and service provider.
  • Always verify current feature lists, firmware versions, and supported accessories with the manufacturer documentation.

Why Use Plaspy with These Features​

Pairing the Teltonika FMB110 with Plaspy gives organizations a straightforward path from compact hardware to operational insights. The FMB110 supplies core vehicle location, temperature sensing, identification, BLE sensor inputs, and immobilizer support, while Plaspy consolidates that data into maps, alerts, and reports that help teams manage fleets, enforce access policies, detect tampering, and monitor temperature sensitive cargo.

To learn more about how Plaspy can use the FMB110 in your deployment, visit https://www.plaspy.com. For the latest device specific technical details, firmware notes, and manufacturer guidance, please verify information at the Teltonika website https://www.teltonika-gps.com/ .

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy