Skip to main content

TrackerKing - JX03 Configuration

This page covers the public configuration context for using the TrackerKing JX03 with Plaspy. It consolidates the practical server settings and procedural guidance you will need to point a JX03 tracker at Plaspy for centralized monitoring, real time location, and event reporting. The instructions focus on the shared Plaspy endpoint and what to check before completing device registration and validation.

Plaspy uses shared server settings across supported devices and automatically detects the tracker protocol, while the exact manufacturer side setup steps can vary depending on firmware, hardware revision, installation type, and the vendor configuration tools provided with the JX03. Use this guide to prepare the tracker and your installation team for integration, and consult TrackerKing documentation for device specific menus and commands.

Configuration Overview​

Preparing a JX03 for Plaspy means configuring the tracker to send its standard tracking messages to the Plaspy endpoint and confirming that data arrives and is processed by the platform. The JX03 is an OBDII powered unit that communicates over the 2G network; the configuration steps are primarily about setting the correct server endpoint, transport, and ensuring cellular connectivity.

  • Point the device to the Plaspy endpoint so location and event messages are routed to the platform.
  • Select the transport protocol (UDP or TCP) on the device when required and set the shared Plaspy port.
  • Verify the vehicle provides power through the OBDII port and that the device has a working SIM and network coverage.
  • Save or apply manufacturer configuration and, if necessary, restart the tracker so settings take effect.
  • Confirm the tracker appears in Plaspy and that live updates plus basic event reporting (geofence, overspeed, tamper) are visible.
  • Remember that Plaspy uses the same port for all supported devices and that protocol detection is automatic on the platform side.

Plaspy Server Settings​

  • Server domain d.plaspy.com
  • Server IP 54.85.159.138
  • Port 8888
  • Transport support for UDP or TCP
  • Plaspy automatically detects the tracker protocol

These are the public Plaspy endpoint values to use when configuring the JX03 so messages reach the Plaspy platform.

Typical Requirements Before Setup​

  • Vehicle available with a working OBDII port to power the JX03.
  • Active 2G GSM coverage at the vehicle location for cellular data delivery.
  • A valid SIM card and service plan that allows data or packet reporting over 2G.
  • Access to the official TrackerKing configuration method or software provided by the manufacturer.
  • A test account or access to Plaspy where you can verify the device appears and reports after configuration.
  • Basic tools to view device logs or LED indicators if provided by the tracker for connectivity troubleshooting.

How This Tracker Connects to Plaspy​

The JX03 reports its GPS position and event/status messages over the cellular network to the Plaspy endpoint. When configured with the shared Plaspy settings, the tracker’s telemetry is routed to the Plaspy servers where the platform automatically recognizes the incoming tracker protocol and associates messages with the device record.

  • The tracker sends location updates and event notifications to d.plaspy.com (or the provided IP) on port 8888.
  • You may select UDP or TCP as the transport on the device; Plaspy accepts either transport on the shared port.
  • Plaspy detects the JX03 protocol automatically and parses standard tracking messages for display.
  • Event types such as geofence, overspeed, tamper, and vibration alerts are forwarded to Plaspy for platform notifications.
  • Once reporting correctly, the device will show up in Plaspy dashboards for live monitoring and route history playback.

Common Configuration Workflow​

  1. Access the official TrackerKing configuration method or software supplied with the JX03.
  2. Enter the Plaspy server address by setting d.plaspy.com or 54.85.159.138 as the device server endpoint.
  3. Set the device server port to 8888 (Plaspy uses the same port for all supported devices).
  4. Choose UDP or TCP as the transport if the device requires a transport selection.
  5. Apply or save the configuration in the TrackerKing tool or device interface.
  6. Restart the tracker if required by the manufacturer to ensure new settings take effect.
  7. Validate that the JX03 reports to Plaspy by confirming device presence and live updates in the platform.

Follow these steps with the TrackerKing tool appropriate for your firmware and hardware revision; some vendors provide SMS, desktop software, or mobile tools to perform these steps.

Example Configuration Commands​

The JX03 modelConfiguration does not include public command strings for this page. Exact command formats and the available configuration channels vary by TrackerKing firmware and vendor tools. In practice you will either:

  • Use TrackerKing’s official configuration app or desktop software to enter d.plaspy.com (or 54.85.159.138) and port 8888 and choose UDP or TCP, or
  • Use the manufacturer documented command set if TrackerKing provides SMS or console commands for device configuration.

Always follow the command syntax published by TrackerKing for your exact firmware build. If you have a TrackerKing command list from the manufacturer, apply the server values d.plaspy.com or 54.85.159.138 and port 8888 as shown in their examples.

Configuration Notes​

  • Device firmware and hardware revisions can change available configuration menus and command syntax; check TrackerKing documentation for your device revision.
  • Choosing TCP or UDP is a device setting; test both if the tracker supports them and use whichever provides reliable delivery in your network conditions.
  • Because Plaspy uses the same port for all devices, point the tracker to port 8888 and rely on Plaspy’s automatic protocol detection to handle message parsing.
  • Validate configuration in a controlled test vehicle before rolling out large deployments to confirm 2G coverage, APN behavior, and event reporting.
  • Manufacturer tools and workflows may vary by market and vendor; always prefer official TrackerKing configuration guides for exact steps.

Why Use Plaspy with This Configuration​

Using the TrackerKing JX03 with Plaspy gives fleet managers and vehicle owners a straightforward path to centralized visibility and event monitoring. The plug and play OBDII design minimizes installation effort while Plaspy’s shared server settings and automatic protocol detection simplify platform onboarding, allowing teams to focus on alerting, route history analysis, and operational oversight.

To learn more about Plaspy and platform features, visit https://www.plaspy.com. For the latest device specific instructions, firmware notices, and manufacturer tools for the JX03, verify details at the TrackerKing site https://trackerking.cn/. Manufacturer specifications and setup methods can change over time so always confirm current instructions with TrackerKing before large scale deployment.

Tracker Configuration

Need a platform for this tracker setup

Plaspy helps you connect compatible trackers, receive device data, and centralize monitoring from one GPS tracking platform.

Learn more about Plaspy