Skip to main content

Tytan SAT - DS520 Features

This page provides a public, non sensitive overview of the Tytan SAT DS520 feature set and how those capabilities are used when the device is connected to Plaspy. It is intended to help fleet managers, integrators, and technical users understand the practical functions the device provides and what information Plaspy can surface from it.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation method, and manufacturer implementation. The information below reflects publicly documented capabilities of the DS520 and describes typical operational uses rather than exhaustive device internals.

Feature Overview​

The DS520 is a versatile GPS tracker designed for real-time tracking of vehicles and cargo and for supervising technical objects. It reports position and movement over the GSM network and includes a range of inputs and outputs for monitoring external sensors and controlling circuits. Its data buffering, power management modes, and remote configuration options make it suitable for mobile applications where connectivity and power conditions vary.

  • Real time GPS and GLONASS position reporting with speed and movement parameters over GSM
  • Multiple analogue and digital inputs for external sensor and switch monitoring
  • 1 wire interface with support for iButton authorization and temperature sensors
  • Two digital outputs for remote control of circuits
  • Onboard data buffering to store events while GSM coverage is unavailable
  • Power saving modes to reduce current draw when the device is inactive

Core Features of Tytan SAT - DS520​

  • GPS and GLONASS position reporting with speed reporting for accurate tracking
  • Communication over GSM GPRS using UDP or TCP protocols for server reporting
  • Two analogue inputs and four digital inputs for external measurements and status monitoring
  • 1 wire interface supporting iButton identifiers and 1 wire temperature sensors
  • Two digital outputs that can be used to control external circuits remotely
  • Non volatile memory that buffers data during loss of GSM connectivity and resends when connection is restored
  • Built in 3 axis accelerometer for drive condition detection without relying on ignition wiring
  • Support for remote configuration and firmware upgrades over GSM GPRS using FTP

How These Features Work with Plaspy​

Plaspy receives and processes the DS520 telemetry so operators can view location, events, and input states in a single platform. Plaspy automatically detects the tracker protocol and accepts connections from devices configured to report to the platform, allowing the DS520 to feed location and event data into Plaspy visualizations and reports.

  • Configure the DS520 to report to Plaspy and it will deliver GPS GLONASS positions and speed for map visualization
  • Plaspy displays input states and sensor events derived from analogue and digital inputs and the 1 wire interface when the device sends those parameters
  • Buffered records stored on the DS520 while out of coverage are uploaded and shown in Plaspy once GSM connectivity is restored
  • Accelerometer driven events and drive condition indicators reported by the device are visible in Plaspy timelines and event logs
  • Plaspy can receive configuration and status messages from the device and will process protocol supported events; Plaspy also auto detects tracker protocol to simplify setup

Note: DS520 devices typically communicate with Plaspy over standard UDP or TCP reporting channels. Plaspy handles incoming messages and maps supported fields into the platform interface.

Typical Use Cases​

  • Real time fleet tracking for passenger cars, buses, and light commercial vehicles
  • Monitoring construction equipment and off road machinery working in intermittent coverage areas
  • Secure transport monitoring for cash in transit and high value cargo
  • Agricultural vehicle tracking and oversight across large areas
  • Supervision of technical objects and remote assets with sensor inputs and outputs
  • Route monitoring and historical playback for operational analysis

Feature Availability Notes​

  • Some functions depend on the device firmware version and manufacturer enabled features
  • Hardware revisions or regional variants may change available inputs, outputs, or radio band support
  • Installation choices such as wiring and sensor type affect which inputs or the 1 wire interface are usable
  • Remote configuration and FTP based firmware updates require network access and may be subject to carrier constraints
  • Always verify which features are enabled on a specific unit before relying on a capability for critical operations

Why Use Plaspy with These Features​

Using the DS520 with Plaspy centralizes location, input state, and event data in a single platform, simplifying monitoring and reporting across mixed fleets and asset types. Plaspy’s protocol detection and device handling let the DS520 deliver positional updates, buffered events, and input states into maps, timelines, and reports so teams can maintain operational awareness and act on events quickly.

To learn more about how the DS520 works with Plaspy visit https://www.plaspy.com. For the most current and device specific details including firmware behavior and manufacturer documentation please verify information at the official Tytan SAT website http://tytansat.com/.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy