Skip to main content

TZone - TZ-AVL05 3G Features

This page summarizes the public feature context for using the TZone TZ-AVL05 3G GPS tracker with Plaspy. It describes the tracker capabilities you can expect to see inside Plaspy for monitoring, alerts, and operational reporting without diving into private or device manufacturer only details.

Exact feature availability and behavior can vary by firmware version, hardware revision, installation method, and manufacturer implementation. Use this page as a practical overview and verify device specific details and the latest firmware behavior with the manufacturer documentation.

Feature Overview​

The TZ-AVL05 3G is a vehicle-focused tracking unit that provides continuous positioning, alerting, and data backup functions useful for fleet management and anti-theft monitoring. When paired with Plaspy, the tracker supplies location and event information that supports map visualization, event notifications, and basic reporting.

  • Real time GPS tracking using a GPS plus GSM module for continuous location updates.
  • Periodic position reporting with built in storage so positional data is retained when mobile network access is unavailable.
  • Multiple alarm types including SOS, GPS antenna cut, power supply cut, GPS no signal, speed and distance change alerts.
  • Anti-theft and control functions such as remote fuel and power cut plus engine and door check alarms.
  • Support for OTA firmware updates and optional peripheral interfaces for sensors and identification accessories.
  • Mileage reporting and low voltage alerts to assist with operational oversight and maintenance planning.

Core Features of TZone - TZ-AVL05 3G​

  • GPS plus GSM double module tracking for continuous location monitoring.
  • Periodic position uploads and local data storage to avoid data loss during network outages.
  • Alarm suite including SOS alarm, GPS antenna cut alarm, power supply cut alarm, GPS no signal alarm, speed alarm, and distance change alarm.
  • Anti-theft related features including remote fuel and power cut and engine and door check alarms.
  • Geo-fence alarm and mileage report generation.
  • G-sensor for detection of sudden movements or impacts and anti-shifting of static GPS to reduce false movement reports.
  • OTA (Over The Air) firmware update capability and support for TZONE standard protocol.
  • Optional expandability such as iButton driver identification, temperature sensor 18B20, RS232 interface for external devices, and TF card storage for backups.

How These Features Work with Plaspy​

When the TZ-AVL05 3G is connected to Plaspy, the device transmits location and event data that Plaspy ingests and presents for monitoring and reporting. Plaspy automatically detects common tracker protocols and accepts device connections using TCP or UDP on the standard Plaspy port, so integration is typically straightforward.

  • Real time locations appear on the Plaspy map and can be tracked as the device reports periodic updates.
  • Alarms such as SOS, antenna cut, power loss, speed and geo-fence events generate identifiable events or notifications inside Plaspy.
  • Stored records collected while the device is offline are uploaded to Plaspy when network connectivity returns, preserving continuity of tracking history.
  • Mileage and movement summaries reported by the device are available in Plaspy reports for operational review.
  • Device telemetry such as low voltage and G-sensor triggered events are surfaced as alerts or event logs to support maintenance and incident investigation.

Typical Use Cases​

  • Fleet location monitoring and route oversight for commercial vehicles.
  • Anti-theft monitoring with instant alerts for tampering, power cut, or antenna removal.
  • Driver and vehicle behavior monitoring using speed and distance change alerts.
  • Remote shutdown or immobilization workflows where remote fuel or power cut functions are implemented.
  • Backup data retention for disconnected periods to ensure continuous historical records.
  • Temperature or identification tracking where optional sensors or iButton accessories are deployed.

Feature Availability Notes​

  • Some features are optional hardware or accessory dependent; optional items such as iButton, temperature sensor, RS232 devices, and TF card storage may not be present on every unit.
  • Firmware version and hardware revision can affect feature behavior and available alarm types; OTA capability may be required to update to newer feature sets.
  • Installation choices and vehicle wiring can change which alarms and remote control features are available or how they behave.
  • Regional variants and carrier network availability may affect GSM reporting behavior and message delivery.
  • Always consult the device configuration and manufacturer documentation for the exact set of features on a specific unit before deployment.

Why Use Plaspy with These Features​

Using the TZ-AVL05 3G with Plaspy gives organizations centralized visibility into vehicle location, alarm status, and historical movement data. Plaspy aggregates the device events and location updates so operations teams can monitor fleets, respond to security incidents, and generate mileage and event reports from a single platform.

Learn more about Plaspy on the main website https://www.plaspy.com. Please note that device features, firmware behavior, and manufacturer implementation can change over time; verify the latest device specific information and specifications with the manufacturer at http://www.tzonedigital.com/ before making deployment decisions.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy