Skip to main content

Ulbotech - T301 Features

This page provides public feature context for using the Ulbotech T301 GPS tracker with Plaspy. It summarizes the device capabilities that are relevant to live tracking, telemetry, and fleet monitoring when the T301 is integrated with Plaspy for maps, events, and reports.

The T301 is an economical entry level tracker focused on simplicity and reliability. Exact feature availability and behavior can vary by firmware version, hardware revision, installation method, and manufacturer implementation, so the descriptions below reflect the device family capabilities rather than an absolute feature guarantee.

Feature Overview​

The T301 is designed to deliver dependable real-time location and vehicle telemetry to Plaspy with a compact vehicle-grade form factor. Its core strengths are straightforward GNSS positioning, basic vehicle status inputs, and practical anti-theft controls that integrate into Plaspy dashboards and event systems.

  • Real-time GNSS tracking and position reporting for live monitoring in Plaspy.
  • ACC ignition detection to indicate vehicle on/off status and support usage reporting.
  • SOS panic input to generate discrete alert events for rapid response.
  • Internal immobilizer and digital output for remote engine cut as part of theft response.
  • Analog AD input to transmit fuel or temperature telemetry into Plaspy reports.
  • 3-axis accelerometer for motion and harsh-event detection to support driver behavior insight.

Core Features of Ulbotech - T301​

  • u-blox 6M GNSS module with assisted GNSS support for fast satellite acquisition and accurate positioning.
  • Quad-band GSM modem with GPRS data uplink for broad cellular coverage and Plaspy integration.
  • ACC (ignition) input and SOS panic input for discrete event signalling.
  • 3-axis accelerometer for motion and harsh-event detection.
  • Internal immobilizer plus a digital output for remote engine cut control.
  • Analog AD input suitable for fuel level or temperature sensor telemetry.
  • Onboard backup battery and wide operating voltage range suitable for vehicle installations.
  • Micro USB configuration and remote management with FOTA via GPRS/FTP and local USB when required.

How These Features Work with Plaspy​

When the T301 is connected to Plaspy, the tracker becomes a source of live locations, status events, and telemetry that Plaspy surfaces in maps, alerts, and reports. Plaspy ingests the T301 telemetry and presents it as actionable information for dispatchers and fleet administrators.

  • Live GNSS fixes appear on Plaspy maps for continuous vehicle location awareness.
  • ACC status and SOS events are shown in Plaspy event feeds and can trigger alerts or workflows.
  • Analog AD input measurements are recorded and can be included in Plaspy telemetry reports and alerts for fuel or temperature monitoring.
  • Immobilizer status and remote engine cut are controllable through Plaspy command channels where device setup and permissions permit remote actions.
  • Accelerometer events are available for safety scoring, harsh driving alerts, and historical analysis in Plaspy.

Typical Use Cases​

  • Day to day fleet tracking and route playback for dispatch and utilization review.
  • Anti-theft protection with SOS alerting and remote immobilizer control for recovery workflows.
  • Fuel monitoring and operational cost control using analog AD input telemetry.
  • Driver behavior monitoring and coaching based on accelerometer events and ignition state.
  • Scheduled reporting and summaries for vehicle usage, location history, and event counts.
  • Roadside assistance triage by checking ignition state and recent alerts for quick diagnosis.

Feature Availability Notes​

  • Firmware versions and hardware revisions can change how features behave or which commands are available.
  • Installation choices such as wiring of inputs, digital outputs, and sensor calibration affect what telemetry is reported to Plaspy.
  • Regional cellular variants or SIM configuration may affect network coverage and GPRS performance.
  • Remote immobilizer and engine cut operation depend on correct wiring, device configuration, and local legal or safety requirements.
  • Bluetooth is not supported on the T301 itself; separate Bluetooth capable devices can be deployed alongside the T301 if BLE integration is needed.

Why Use Plaspy with These Features​

Using the Ulbotech T301 with Plaspy gives organizations a focused, cost effective way to add real-time location, event visibility, and basic vehicle telemetry into a fleet management workflow. Plaspy consolidates position updates, ACC and SOS events, analog telemetry, and accelerometer alerts into dashboards and reports that help dispatchers, fleet managers, and safety teams act on live information.

Learn more about Plaspy and how it can work with devices like the T301 at https://www.plaspy.com. Device features, firmware behavior, and manufacturer implementation can change over time, so verify the latest device-specific details on the manufacturer website http://www.ulbotech.com/.

Tracker Capabilities

See how these features fit into Plaspy

Plaspy helps turn compatible tracker capabilities into useful visibility, monitoring, and operational workflows across vehicles and assets.

Learn more about Plaspy