Xirgo - XT-5000 Protocol
This page provides a public, high level description of the communication context for the Xirgo XT-5000 when used with Plaspy. It focuses on the protocol role in reporting position, device health, and status messages to the Plaspy platform without revealing sensitive implementation details. Use this as a compatibility and integration reference alongside manufacturer documentation.
The XT-5000 is a rugged long life tracker optimized for remote deployments with features such as ultra low power consumption and optional high capacity battery packs. Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol. Exact protocol behavior and available features can vary by firmware version, hardware revision, and manufacturer implementation.
Protocol Overview
The communication protocol governs how the XT-5000 identifies itself, transmits location and status updates, and interacts with a remote server. The protocol used by the device is the mechanism that makes sensor, position, and health data usable by Plaspy for tracking and monitoring.
- Allows the device to report periodic or event driven location and status updates to a remote server
- Carries device identifiers that let Plaspy associate incoming messages with the correct asset
- Conveys sensor and health information such as battery level, motion state, and GNSS fix validity in a parsable form
- Supports both short periodic reports and less frequent long term reporting suitable for low power operation
- Enables server side acknowledgement or command delivery when supported by the device and transport
How Plaspy Detects the Protocol
Plaspy receives data from many tracker models and automatically determines the correct protocol parser for each incoming connection. When the XT-5000 is configured to report to Plaspy, explicit protocol selection inside Plaspy is typically not required.
- Plaspy listens on a single shared endpoint and port for all devices
- The platform automatically detects the appropriate tracker protocol for incoming data streams
- Proper device configuration to point at the Plaspy endpoint is the common setup step
- If reporting fails, review device reporting settings, transport selection, and manufacturer guidance
- Plaspy compatibility focuses on receiving and interpreting public protocol elements needed for tracking
Transport and Connection Context
Connection choices such as UDP or TCP and the server address determine how the XT-5000 delivers its protocol messages to Plaspy. The tracker may be configured to use either transport depending on its firmware and configuration options.
- Plaspy server domain for device reporting is d.plaspy.com
- Plaspy also accepts connections to the server IP 54.85.159.138
- The standard reporting port used by Plaspy is 8888 and is shared for all supported devices
- The XT-5000 may be configured to use UDP or TCP on port 8888 depending on device support
- Ensure device APN, outbound transport, and destination address match the chosen Plaspy endpoint
Protocol Compatibility Notes
- Firmware revisions can change message fields, reporting intervals, and optional features
- Hardware variants or sensor options such as optional accelerometers may affect available telemetry
- Manufacturer configurable transport selection between UDP and TCP can impact delivery and reliability
- Some device commands and server responses depend on firmware support and are not universal
- Validate compatibility by testing a device reporting to the Plaspy endpoint under expected operating conditions
- Consult official Xirgo documentation for firmware specific protocol details and updates
Why Protocol Understanding Matters
A basic understanding of the XT-5000 communication protocol helps ensure successful setup, predictable reporting, and effective troubleshooting with Plaspy. Knowing what the device sends and how the platform receives it reduces integration time and improves operational reliability.
- Helps confirm device identity and correct association in Plaspy
- Guides transport and endpoint configuration for reliable reporting
- Simplifies root cause analysis when messages are missing or malformed
- Aids planning for power use and reporting intervals to match battery life goals
- Informs expectations about available telemetry based on device options and firmware
Why Use Plaspy with This Protocol
Using the Xirgo XT-5000 with Plaspy gives organizations a practical way to collect long term location and status information from rugged remote assets. The XT-5000 is designed for low power and harsh environments, and Plaspy provides the centralized intake and processing needed to turn device reports into actionable fleet and asset insights.
To learn more about Plaspy and how your XT-5000 devices can report to our platform visit https://www.plaspy.com. For the latest device specific protocol details, firmware notes, and implementation guidance consult the manufacturer at https://xirgo.com/. Note that protocol support and firmware behavior can change over time so verifying current information with the manufacturer is recommended.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.