Skip to main content

ATrack - AK7 Protocol

This page provides a public protocol context for using the ATrack AK7 GPS tracker with Plaspy. It describes how the AK7 communicates in broad, non sensitive terms and explains the connection context that matters when integrating the device with Plaspy for fleet monitoring and telematics.

Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when a device reports to the Plaspy endpoint. Exact protocol behavior and available features can vary by AK7 firmware version, hardware revision, and manufacturer implementation, so this page focuses on safe integration concepts rather than firmware level details.

Protocol Overview​

The AK7 uses its reporting protocol to deliver position, event, and sensor data over cellular networks to a remote server. That protocol is responsible for identifying the device, transmitting GPS and sensor telemetry, and enabling event driven reporting so back end platforms such as Plaspy can ingest and present usable information.

  • Enables periodic and event driven transmission of GPS location and vehicle telemetry to a remote server
  • Carries identity information so the receiving platform can associate messages with a specific AK7 device
  • Transports sensor and event data from the AK7 event control engine and 3 axis G sensor for harsh driving detection
  • Supports multiple transport options from the device including IP based reporting over TCP and UDP
  • Works alongside other communication channels the device supports such as SMS and USSD for out of band access or fallback

How Plaspy Detects the Protocol​

Plaspy receives device reports at a single shared endpoint and port and determines the incoming tracker protocol automatically. When an AK7 is configured to report to the Plaspy endpoint, the platform matches the incoming data stream to a compatible handler so users typically do not need to select a protocol manually inside Plaspy.

  • Plaspy listens on a common server endpoint d.plaspy.com and also accepts reports to the server IP 54.85.159.138
  • Plaspy uses port 8888 for device connections and this is the same port used by all devices in Plaspy
  • Devices may be set to use either UDP or TCP transport targeting the Plaspy endpoint depending on device configuration
  • Automatic detection reduces the need for manual protocol selection when the AK7 is pointed at the Plaspy endpoint
  • If a device is not reporting as expected, verify device server address and transport settings on the AK7

Transport and Connection Context​

The AK7 can send data over IP using TCP or UDP and must be pointed to the Plaspy server settings to reach the platform. Correct transport and endpoint configuration are essential for reliable delivery of telemetry and for Plaspy to automatically detect the device protocol.

  • The device may be configured to use UDP or TCP on port 8888 depending on device support and local configuration
  • AK7 devices can target the Plaspy server by domain d.plaspy.com or by server IP 54.85.159.138
  • Plaspy uses the same port 8888 across its device fleet to simplify configuration and detection
  • Choose transport (TCP or UDP) based on network reliability and the AK7 firmware capabilities
  • Confirm APN and cellular connectivity on the AK7 so it can send IP reports to the Plaspy endpoint

Protocol Compatibility Notes​

  • AK7 behavior can differ by firmware version and hardware revision; verify the device firmware level when validating integration
  • Some AK7 models may support additional transport or reporting modes such as SMS, USSD, or FTP for FOTA updates; these are separate from IP reporting to Plaspy
  • Selecting TCP versus UDP affects delivery characteristics and should match what the AK7 firmware supports and what your network allows
  • Plaspy accepts AK7 reports at d.plaspy.com or 54.85.159.138 on port 8888 so ensure the device server address and port are configured accordingly
  • Manufacturer configuration options and event engine settings can change what data the device sends and when it sends it
  • Always consult the AK7 official documentation for firmware specific notes before making deployment decisions

Why Protocol Understanding Matters​

A practical understanding of the AK7 communication protocol helps accelerate setup, reduce troubleshooting time, and improve long term reliability when the device is used with Plaspy. Knowing how the device reports, which transports it supports, and what affects message delivery helps ensure accurate telemetry and timely alerts.

  • Ensures the AK7 is configured to report to d.plaspy.com or the Plaspy server IP and to use port 8888
  • Helps choose the appropriate transport mode (TCP or UDP) for your deployment and network environment
  • Makes it easier to map AK7 event engine outputs and sensor inputs to Plaspy alarms and dashboards
  • Reduces downtime by helping diagnose connectivity issues such as APN, firewall, or transport mismatches
  • Supports planning for firmware updates and FOTA behavior that may change reporting or features

Why Use Plaspy with This Protocol​

Using the ATrack AK7 with Plaspy gives organizations consistent visibility into vehicle location, events, and sensor data through a platform that automatically identifies and handles the tracker protocol. The AK7s combination of accurate GPS, event control features, and sensor inputs pairs well with Plaspy for fleet monitoring, driver behavior insight, and operational oversight.

To learn more about Plaspy and how it works with devices like the ATrack AK7 visit https://www.plaspy.com. For the most current device protocol specifics, firmware notes, and manufacturer instructions verify details on the official ATrack website at https://www.atrack.com.tw/ since protocol support and firmware behavior can change over time.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy