Skip to main content

Carscop - CCTR-831 Protocol

This page describes the public protocol context for using the Carscop CCTR-831 OBD II GPS tracker with Plaspy. It focuses on how the device communicates over mobile data and SMS to deliver positioning, telemetry, and alarms to a Plaspy endpoint without exposing vendor private internals.

Plaspy uses shared connection settings across supported devices and automatically detects a tracker protocol when a device reports to the platform. Exact behavior for reporting intervals, alarm triggers, and on device configuration can vary with firmware version, hardware revision, and manufacturer implementation, so this page stays at a high level and complements the device documentation.

Protocol Overview​

The CCTR-831 uses GPS for positioning and a GPRS data channel to upload location and event information to remote servers. The public protocol role is to package identity, location, and alarm state so Plaspy can interpret and display device status for fleet monitoring, geofencing, and history playback.

  • Sends device identity and location updates so Plaspy can associate telemetry with the correct vehicle
  • Transmits alarm and event notifications such as motion, shock, power loss, and device removal for timely alerts
  • Supports remote configuration via SMS for server and APN settings when data access is limited
  • Uses an open GPRS reporting scheme so data uploads can target third party platforms including Plaspy
  • Enables continuous tracking, history storage, and event based uploads that Plaspy surfaces to users

How Plaspy Detects the Protocol​

Plaspy listens on a shared endpoint and port and automatically detects the tracker protocol when the device transmits to that endpoint. In most cases an installer only needs to point the device at the Plaspy endpoint and the platform handles protocol identification and parsing.

  • Plaspy server domain for device reporting is d.plaspy.com
  • Plaspy server IP is 54.85.159.138 using the configured port
  • The standard listening port for all Plaspy devices is 8888 and Plaspy uses the same port for every supported tracker
  • Plaspy will automatically detect the tracker protocol when the CCTR-831 or another compatible device reports to the Plaspy endpoint
  • Users typically do not need to manually select a protocol inside Plaspy if the device is configured to report to the Plaspy endpoint

Transport and Connection Context​

The CCTR-831 uploads data over mobile GPRS and can be configured to use either of the common transport modes depending on device firmware and operator configuration. Connection context is about how the device reaches the Plaspy endpoint rather than internal frame formats.

  • The device may be configured to use UDP or TCP for data uploads on port 8888
  • Devices can be pointed to the host name d.plaspy.com or the IP address 54.85.159.138
  • All Plaspy devices use the same port which simplifies fleet level server settings and mass configuration
  • SMS configuration is supported for APN and server settings when GPRS access is not available
  • Transport choice and stability may depend on carrier network and firmware options on the CCTR-831

Protocol Compatibility Notes​

  • Firmware and hardware revisions can change how frequently the device reports or which optional fields are included in uploads
  • Manufacturer SMS command sets and remote configuration keywords may vary by firmware release
  • Transport selection between UDP and TCP may affect delivery semantics and should match the device configuration
  • Some vehicle specific OBD data fields may be available only on compatible vehicles and with appropriate firmware
  • Verify that devices are pointed to d.plaspy.com or 54.85.159.138 on port 8888 to allow Plaspy to receive data
  • Always cross check device behavior against the official manufacturer documentation for the deployed firmware

Why Protocol Understanding Matters​

Understanding the high level communication protocol helps installers and fleet administrators get devices reporting reliably to Plaspy, troubleshoot connectivity issues, and plan for firmware or configuration differences across a mixed fleet.

  • Confirms that devices are addressing the correct Plaspy endpoint and port for automatic detection
  • Helps identify whether transport type or APN settings are preventing data uploads
  • Improves troubleshooting of alarm and event delivery such as motion or power loss notifications
  • Informs decisions about mass configuration methods including SMS provisioning versus over the air updates
  • Supports operational choices like reporting intervals and event triggers that affect data volume and battery behavior

Why Use Plaspy with This Protocol​

Pairing the Carscop CCTR-831 with Plaspy provides a straightforward path to centralized vehicle visibility. The plug and play OBD II form factor reduces installation time while the device s built in motion detection, backup battery, and SMS configuration options help maintain situational awareness even during network interruptions.

To learn more about how Plaspy works with devices like the CCTR-831 visit https://www.plaspy.com. For the most current device specific protocol details, firmware behavior, and manufacturer command sets verify information on the official Carscop website at http://www.carscop.com/ as implementations and firmware may change over time.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy