Concox - GT06N Protocol
This page provides public protocol context for using the Concox GT06N tracker with Plaspy. It explains, at a high level, how the device communicates with Plaspy's ingestion endpoint and what role the tracker reporting protocol plays in delivering location, status, and event data to the platform. The content focuses on communication and compatibility rather than internal firmware or proprietary packet details.
Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when a device reports to the platform. Exact protocol behavior can vary by firmware version, hardware revision, and manufacturer implementation, so the information here is descriptive and intended to help with setup and troubleshooting rather than replace vendor documentation.
Protocol Overview
The protocol for the GT06N defines how the unit reports GNSS coordinates, digital input states, alarms, and telemetry to a remote server so platforms like Plaspy can display, analyze, and act on the data. For Plaspy integration, the protocol's public aspects are the device's ability to target the Plaspy endpoint and to send regular position and event messages.
- Enables the GT06N to transmit GNSS position, ignition and input states, and alarm events to a remote server.
- Allows the device to identify itself so Plaspy can associate incoming data with a registered asset.
- Carries real-time and periodic telemetry that Plaspy uses for live monitoring and historical playback.
- Supports event-driven alerts (SOS, power loss, overspeed, geo-fence, vibration) that feed Plaspy notification rules.
- Provides a predictable channel for remote commands and control where supported by the device and platform.
How Plaspy Detects the Protocol
Plaspy listens on a single shared endpoint and port for incoming device connections and automatically detects the tracker protocol when the GT06N reports to that endpoint. In most cases, users do not need to manually select a protocol inside Plaspy if the tracker is configured to report to the Plaspy server.
- Plaspy server domain for device reporting is d.plaspy.com.
- Plaspy server IP is 54.85.159.138 and the platform accepts device connections on port 8888.
- Devices may be configured to use UDP or TCP for their transport layer when reporting.
- Plaspy uses the same port for all supported devices, simplifying device configuration.
- When a properly configured GT06N begins reporting, Plaspy will detect the format and associate messages with the correct device record.
Transport and Connection Context
Connection context describes how the GT06N reaches Plaspy rather than internal packet structure. The GT06N can be set to point at a hostname or IP and to use TCP or UDP as supported by the unit and its firmware. Ensuring correct transport and server target is a core step in getting the tracker to communicate reliably with Plaspy.
- The GT06N may be configured to report to d.plaspy.com or directly to 54.85.159.138.
- Plaspy accepts both UDP and TCP connections from devices that support either transport on port 8888.
- All devices reporting to Plaspy use the same port, which reduces configuration errors across mixed fleets.
- Network factors such as carrier NAT, firewall rules, and SIM data connectivity affect connection stability and should be verified during installation.
- Confirm device reporting intervals and event settings on the GT06N to match your fleet operational needs and to control data usage.
Protocol Compatibility Notes
- Firmware versions can change how particular messages are formatted or which fields are present; verify firmware release notes for device-specific behavior.
- Hardware revisions or accessory options may affect available inputs, outputs, or peripheral reporting capabilities.
- Some features such as remote relay control or voice monitoring depend on both device hardware and manufacturer firmware support.
- Transport selection (UDP versus TCP) can affect delivery semantics; choose the mode that matches your device configuration and carrier environment.
- Plaspy automatically detects the tracker protocol when the device reports to the shared port, but correct server target and transport must be configured on the tracker.
- Always validate compatibility and expected behavior against the official Concox documentation for your exact device revision and firmware.
Why Protocol Understanding Matters
Knowing how the GT06N communicates helps installers and administrators avoid common setup pitfalls, interpret incoming data correctly in Plaspy, and troubleshoot connectivity or reporting issues efficiently. A clear understanding of the communication context reduces downtime and improves the quality of location and event data used for operations.
- Ensures the device is pointed to the correct Plaspy endpoint and transport mode for reliable reporting.
- Helps diagnose connectivity issues caused by carrier networks, APN settings, or firewalls.
- Enables informed decisions about reporting intervals, power management, and event thresholds to balance data freshness and SIM usage.
- Clarifies expectations for which telemetry and alert types will appear in Plaspy based on firmware and hardware capabilities.
- Supports smoother integration when deploying mixed fleets with different tracker models or revisions.
Why Use Plaspy with This Protocol
Using the GT06N with Plaspy gives organizations a practical path to real-time vehicle visibility, event-driven alerts, and centralized fleet oversight. The GT06N's suite of inputs, alarms, and remote control options align with Plaspy's monitoring, reporting, and rule engines to support common fleet workflows such as theft response, ignition-based reporting, and incident logging.
If you want to learn more about Plaspy and how it works with devices like the GT06N, visit https://www.plaspy.com. For the most current device specific protocol details, firmware notes, and manufacturer guidance, please verify information on the Concox website at https://www.iconcox.com/ as implementations and firmware behavior can change over time.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.