Condor - GE-810 Protocol
This page documents the public protocol context for using the Condor GE-810 personal monitoring device with the Plaspy platform. It focuses on how the device communicates telemetry, status, and event notifications to Plaspy in general terms, helping implementers and integrators understand the role of the communication protocol in a Plaspy deployment.
Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when devices report to the Plaspy endpoint. Exact protocol behavior for the GE-810 can vary by firmware version, hardware revision, region, and manufacturer implementation, so this page emphasizes connection and compatibility context rather than device internals.
Protocol Overview
The GE-810 communication protocol enables the device to deliver event driven telemetry and voice status to a remote monitoring platform. The protocol provides the necessary signals for identifying the device, reporting tamper and removal events, conveying discrete alerts such as vibration acknowledgements, and sending location or status updates when GNSS is available.
- Transmits device identity and status so Plaspy can associate events with the correct wearable
- Delivers tamper and removal alerts for immediate attention by supervisors and monitoring staff
- Sends vibration alert events and two way voice indicators so Plaspy can log and surface human interactions
- Carries periodic or event driven location and telemetry when GNSS or paired sensors are present
- Enables Plaspy to ingest event timestamps and state changes for auditing and case management
How Plaspy Detects the Protocol
Plaspy receives incoming device connections on a shared endpoint and port and performs automatic protocol detection to associate incoming data with a known device type. In most deployments, owners do not need to manually select a protocol in Plaspy once the GE-810 is configured to report to the Plaspy endpoint.
- Plaspy accepts connections directed to the public server domain d.plaspy.com
- The Plaspy server is also reachable at the public IP 54.85.159.138 for environments that require an IP address
- All devices configured for Plaspy use the same port for reporting to the platform
- When the GE-810 is set to report to the Plaspy endpoint, Plaspy will automatically detect the tracker protocol
- Proper device configuration on the cellular side is the common requirement for automatic detection to succeed
Transport and Connection Context
The GE-810 can be configured to send telemetry over standard transport protocols depending on device configuration and network behavior. Plaspy supports both common transport options on the shared Plaspy port so that devices with varying transport preferences can connect without per device port changes.
- Devices may be configured to use UDP or TCP on port 8888 to report to Plaspy
- Point the device reporting address to d.plaspy.com or to the IP 54.85.159.138 for networks that resolve more reliably with an IP
- Plaspy listens on port 8888 for all supported devices to simplify deployment and provisioning
- Choose UDP when lower overhead is required and TCP when connection reliability and session handling matter based on device capabilities
- Network and carrier settings such as APN and allowed outbound ports should permit outbound traffic to port 8888
Protocol Compatibility Notes
- The GE-810 is compatible with Plaspy when configured to report to the Plaspy endpoint and port
- Firmware versions and hardware revisions can change event reporting timing and available fields; verify behavior for the firmware installed on your devices
- Some regions or SKUs may vary cellular band support and optional GNSS performance which can affect location reporting cadence
- Transport selection between UDP and TCP is device configurable and may influence message delivery characteristics
- Manufacturer side configurations such as default reporting server settings should be updated to point at d.plaspy.com or 54.85.159.138 on port 8888
- Validate device behavior in a controlled environment before broad deployment to confirm event types and notification timing
Why Protocol Understanding Matters
Understanding the communication protocol used by the GE-810 is important for reliable setup, troubleshooting, and long term operation with Plaspy. Clear expectations about how the device reports events and how Plaspy ingests those signals reduce integration time and improve monitoring assurance.
- Ensures the device is pointed at the correct Plaspy endpoint and port for automatic detection
- Helps troubleshoot connectivity issues related to transport selection UDP versus TCP and carrier restrictions
- Guides expectations for how tamper and vibration events are surfaced in Plaspy workflows and alerts
- Supports planning for fallback or redundancy in cases of intermittent cellular coverage
- Aids in coordinating firmware updates and hardware revisions that may affect reporting behavior
Why Use Plaspy with This Protocol
Using the Condor GE-810 with Plaspy provides an operationally focused solution for programs that require continuous on-person monitoring, timely tamper alerts, and two way voice interaction. Plaspy consolidates GE-810 events with other telemetry sources to give monitoring teams a unified view of incidents and device state, simplifying response procedures and audit reporting.
If you want to learn more about Plaspy and how it handles device integration, visit https://www.plaspy.com. For the latest device specific protocol details, firmware behavior, and manufacturer guidance for the GE-810, please verify current information at the manufacturer website https://condorskyseeker.com/ as implementation details can change over time.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.