Skip to main content

EElink - GPT15 Protocol

This page covers the public protocol context for using the EElink GPT15 tracker with Plaspy. It explains how the device communicates with the Plaspy platform in non sensitive, implementation agnostic terms so that administrators and integrators understand what to configure and validate for reliable data delivery.

Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol. Exact protocol behavior can vary by firmware version, hardware revision and manufacturer implementation, so this document focuses on the connection and reporting context rather than firmware internals or proprietary packet formats.

Protocol Overview​

At a high level, the GPT15 reporting protocol is the on device communication method that conveys location, sensor and status data to a remote server such as Plaspy. The protocol ensures the tracker identifies itself, reports layered positioning and sensor events, and allows the server to produce meaningful telemetry, alerts and history for end users.

  • Carries location updates from GPS, Wi Fi and base station LBS to a backend for mapping and history.
  • Conveys device state events such as tamper or low battery so the platform can trigger alerts.
  • Lets the server associate incoming messages with a specific device identifier for correct routing.
  • Supports regular telemetry intervals and event driven reports so Plaspy can manage real time visibility and alerts.
  • Enables remote configuration options exposed by the device through app or SMS with settings that affect how reports are sent.

How Plaspy Detects the Protocol​

Plaspy accepts device connections on a single shared endpoint and automatically detects the tracker protocol used by an incoming device. When a GPT15 is pointed at the Plaspy endpoint and uses a supported transport, Plaspy will identify the device type and begin ingesting its telemetry without requiring the user to manually select a protocol inside the platform.

  • Plaspy uses the same server endpoint for all supported devices and automatically detects the tracker protocol.
  • The Plaspy server domain is d.plaspy.com and the server IP is 54.85.159.138 for systems that require an IP based entry.
  • All devices in Plaspy use the same port which simplifies device configuration across models.
  • Typically, there is no need to pick a protocol in Plaspy if the device reports to the Plaspy endpoint with the correct transport and device identifier.
  • If a device is not appearing, confirm the tracker is configured to report to the Plaspy endpoint and review device side connectivity settings.

Transport and Connection Context​

Connection choices and transport determine how the tracker reaches Plaspy but do not change the public role of the protocol. GPT15 units may be configured to use either UDP or TCP to send reports depending on firmware and configuration, and they can target the Plaspy domain or its public IP address.

  • Devices may be configured using UDP or TCP on port 8888 depending on device support and configuration choices.
  • Plaspy listens on port 8888 for device reports and all devices in Plaspy use the same port.
  • Trackers can point to the Plaspy server domain d.plaspy.com or to the public IP 54.85.159.138 if an IP entry is required.
  • Choose UDP for lower overhead event reporting when supported by the tracker, or TCP if the device firmware recommends reliable session delivery.
  • Verify that network firewalls and carrier APN settings permit outbound traffic to the Plaspy endpoint on the configured transport and port.

Protocol Compatibility Notes​

  • Firmware differences across GPT15 production batches can affect available reports and remote configuration commands.
  • Hardware revisions or region specific SKUs may expose different radio band behavior or sensor reporting details.
  • Manufacturer side variations in default APN or remote server settings mean you should confirm the device is set to report to d.plaspy.com or 54.85.159.138 on port 8888.
  • Transport selection matters for reliability and battery consumption use cases do a quick validation of UDP versus TCP behavior for your deployment.
  • Plaspy automatically detects the tracker protocol but correct device identifier and reporting address are required for successful detection.
  • Always validate device behavior in a test deployment before large scale rollouts to ensure expected telemetry and alerting.

Why Protocol Understanding Matters​

Understanding the GPT15 communication protocol at a practical level helps administrators and integrators reduce setup time, speed troubleshooting and maintain long term reliability of tracking services on Plaspy.

  • Faster setup by knowing which fields on the device to configure so it reports to d.plaspy.com or 54.85.159.138 on port 8888.
  • Quicker troubleshooting when reports are missing because you can confirm transport UDP or TCP and port alignment.
  • Better battery and reporting tradeoffs by understanding how telemetry intervals and transport choices affect device lifetime.
  • Clearer expectations for alerting and geofence behavior when you know what kinds of sensor events the device will send to Plaspy.
  • Smoother firmware updates and device rollouts by factoring in revision dependent protocol variations.

Why Use Plaspy with This Protocol​

The GPT15 is a compact, travel oriented tracker that pairs well with Plaspy for luggage and small asset visibility. Using Plaspy with GPT15 telemetry provides centralized maps, history and alert distribution so owners and managers receive actionable information about location, tamper events and battery status without managing custom backend infrastructure.

Plaspy simplifies deployment by using a single listening port for all devices and automatic protocol detection, allowing teams to focus on operations rather than device specific server details. To learn more about how Plaspy handles device integrations and to explore platform features, visit https://www.plaspy.com. For the most current device firmware behavior and protocol specifics always verify device implementation details with the manufacturer at https://www.eelink.com.cn/ which may update protocol behavior over time.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy