Skip to main content

EElink - GPT48‑X Protocol

This page summarizes the public protocol context for using the EElink GPT48‑X tracker with Plaspy. It focuses on how the device communicates with the Plaspy platform in broad, non sensitive terms and explains the role of the device protocol in delivering location, telemetry, and event data into Plaspy for monitoring and reporting.

Plaspy uses shared connection settings across its supported devices and automatically detects the tracker protocol when a device reports to the platform. Exact protocol behavior for the GPT48‑X can vary by firmware version, hardware revision, and manufacturer implementation, so this page provides general guidance and integration context without exposing firmware internals or private packet formats.

Protocol Overview​

The EELINK protocol used by the GPT48‑X defines how the tracker reports GNSS positions, status, and event notifications to a backend service such as Plaspy. At a high level the protocol enables identification, periodic and event driven reporting, and remote configuration so Plaspy can ingest usable location and telemetry data.

  • Device identification and registration information that lets Plaspy associate received reports with the correct asset
  • Periodic position and heartbeat reporting for location tracking and device health monitoring
  • Event and alarm reporting for tamper, movement, emergency mode, and geofence triggers
  • Remote configuration support so reporting parameters and modes can be adjusted via platform, mobile app, or SMS
  • Telemetry fields such as battery level and device status that Plaspy surfaces in dashboards and alerts

How Plaspy Detects the Protocol​

Plaspy listens on a shared endpoint and port for device reports and automatically detects the tracker protocol when properly configured devices send data. In most cases users do not need to manually select a protocol inside Plaspy if the device is pointing at the correct Plaspy endpoint and using the supported transport.

  • Plaspy server domain for device reporting is d.plaspy.com
  • Plaspy server IP is 54.85.159.138 and the shared port is 8888
  • Plaspy automatically detects the tracker protocol and maps incoming data to the corresponding device record
  • Devices should be configured to report to d.plaspy.com or 54.85.159.138 to reach Plaspy
  • Typical device configuration includes a unique device identifier so Plaspy can match reports to the correct asset

Transport and Connection Context​

The GPT48‑X can use low power cellular links such as LTE Cat‑M and NB‑IoT to reach Plaspy. Transport selection and device network behavior are set by device firmware and configuration; Plaspy accepts reports over the shared transport settings to simplify integration.

  • Devices may be configured to use UDP or TCP on port 8888 depending on device support and network conditions
  • All devices in Plaspy use the same port for reporting so a single inbound endpoint simplifies platform routing
  • Devices may point to the Plaspy domain d.plaspy.com or directly to IP 54.85.159.138
  • Cellular connectivity type such as LTE Cat‑M or NB‑IoT will affect reporting frequency, latency, and power consumption
  • Ensure network and operator settings allow outbound connections to the Plaspy endpoint and chosen transport

Protocol Compatibility Notes​

  • Firmware revisions can change behavior and available fields in device reports; confirm firmware level when validating integration
  • Hardware SKUs and regional variants may alter supported bands and power modes and in some cases alter protocol options
  • The GPT48‑X advertises EELINK protocol support but manufacturer settings or custom firmware can introduce vendor variants
  • Transport selection between UDP and TCP can influence delivery characteristics and should match the device configuration
  • Remote management methods such as platform, app, or SMS configuration are useful for altering reporting settings after deployment
  • Always validate compatibility with the official manufacturer documentation and your device supplier before large scale rollout

Why Protocol Understanding Matters​

Knowing how the GPT48‑X communicates helps ensure reliable setup, smooth onboarding into Plaspy, and effective troubleshooting of telemetry and alerting behavior. Clear protocol understanding reduces integration delays and improves long term reliability.

  • Confirms the device is reporting the identifiers and fields Plaspy needs to associate data with assets
  • Helps choose appropriate transport and reporting intervals to balance responsiveness and battery life
  • Makes troubleshooting easier when devices are offline, misreporting, or sending unexpected events
  • Supports planning for firmware upgrades and understanding how changes may affect reporting or configuration
  • Enables confident mapping of device events such as tamper, emergency, and geofence alerts into Plaspy rules and workflows

Why Use Plaspy with This Protocol​

Using the GPT48‑X with Plaspy provides durable, low maintenance tracking for assets that need long standby time and reliable event reporting. Plaspy ingests GNSS positions and device telemetry from the tracker and presents them in dashboards, alerts, and historical reports to support fleet operations, asset recovery, and preventive maintenance.

To learn more about Plaspy and how it works with devices like the GPT48‑X visit https://www.plaspy.com. For the latest device specific protocol and firmware details always verify current information on the manufacturer site https://www.eelink.com.cn/ as protocol support and firmware behavior can change over time.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy