EElink - K6 Protocol
This page summarizes the public protocol context for the EElink K6 GPS tracker and how that device communicates with the Plaspy platform. It focuses on the network and reporting behaviour relevant to integration and troubleshooting, while avoiding sensitive implementation details. Use this guide to understand how the K6 can send position and status data to Plaspy and what to check when deploying the device.
The K6 supports GPS positioning, LBS augmentation, GPRS data upload, two way voice capabilities and an SOS function, and it is reported to work with Plaspy. Plaspy uses a shared connection endpoint and port for all supported devices and automatically detects the tracker protocol. Exact protocol behavior can vary by firmware version, hardware revision, and manufacturer implementation, so always validate device settings and firmware when you configure a tracker for production use.
Protocol Overview
The device reporting protocol is the mechanism the K6 uses to identify itself and to deliver location, status, and alarm data to a server such as Plaspy. The protocol determines what information is sent, how frequently data is reported, and how the server acknowledges or responds to device messages. For K6 devices these behaviours are governed by the installed firmware and the device configuration chosen at deployment.
- Enables the tracker to report GPS and LBS location data and basic status to a remote server
- Carries alarm events such as SOS presses, geo fence alerts, and low battery notifications
- Conveys device identity and session context so the server can associate messages with the correct asset
- Supports configuration updates from the server or via OTA when the manufacturer provides that option
- Operates over cellular data using GPRS so messages reach a backend like Plaspy for processing
How Plaspy Detects the Protocol
Plaspy receives tracker reports on a single shared endpoint and detects the device protocol automatically so most users do not need to select a protocol manually inside Plaspy. When a K6 is configured to report to Plaspy it will send its messages to the Plaspy server, and Plaspy matches the incoming traffic to a supported protocol based on the incoming message profile.
- Plaspy server domain is d.plaspy.com and the host IP is 54.85.159.138
- Plaspy uses port 8888 for device reporting and all devices in Plaspy use the same port
- Plaspy automatically detects the tracker protocol so explicit protocol selection is usually not required
- Ensure the K6 is configured to report to the Plaspy endpoint for automatic detection to take effect
- If a device does not appear to register, verify device APN, reporting address, transport type, and firmware settings
Transport and Connection Context
Connection transport and address settings determine how the K6 reaches Plaspy. The K6 can be set to use either UDP or TCP transport depending on device capability and configuration. Pointing the K6 to Plaspy using the provided domain or IP and the shared port is the typical setup for reporting and remote management.
- Devices may be configured to report to d.plaspy.com or directly to 54.85.159.138
- The device may be configured using UDP or TCP on port 8888 depending on device support and configuration
- All devices in Plaspy use the same port so there is no per device port configuration on the server side
- Use the transport type supported by the device firmware and match that setting in device configuration
- Verify cellular APN and network connectivity to ensure GPRS data can reach the Plaspy endpoint
Protocol Compatibility Notes
- Compatibility can vary by firmware version; confirm the K6 firmware supports the reporting behaviour you expect
- Hardware revisions or regional variants may implement differences in alarms or optional features
- Transport selection between UDP and TCP should match the device configuration and any network firewall rules
- Manufacturer customizations or reseller firmware may change message formats or supported commands
- OTA updates can alter protocol behaviour; review release notes before performing fleet updates
- Always validate device identity and reporting in a controlled test before large scale deployment
- Consult the manufacturer for device specific configuration examples and supported features
Why Protocol Understanding Matters
Understanding the communication protocol helps ensure reliable tracking, correct alarm handling, and efficient troubleshooting when a K6 device is integrated with Plaspy. Knowledge of how the device reports, which events it can send, and how it establishes a connection to the server reduces guesswork during setup and accelerates resolution of connectivity issues.
- Ensures correct device configuration for reporting to the Plaspy endpoint
- Helps diagnose missing location updates or unexpected device behaviour
- Informs decisions about transport selection and network firewall configuration
- Clarifies how alarms and status flags are delivered and interpreted by Plaspy
- Supports safe planning for firmware updates or changes to device fleet settings
Why Use Plaspy with This Protocol
Using Plaspy as the backend for EElink K6 devices provides a centralized way to collect position and event data from a dispersed fleet. Because Plaspy listens on a consistent endpoint and port and automatically detects the incoming protocol, teams can deploy K6 units with fewer per device server settings and rely on the platform to process standard tracking reports and alarms.
If you want to learn more about how Plaspy handles device connections and to explore deployment options for the EElink K6, visit https://www.plaspy.com. Please note that protocol support, firmware behavior, and device implementation details can change over time; verify the latest device specific protocol details and firmware instructions on the manufacturer website at https://www.eelink.com.cn/ before finalizing your deployment.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.