Skip to main content

GPSMarker - M70 Protocol

This page summarizes the public protocol context for using the GPSMarker M70 tracker with the Plaspy platform. It focuses on how the device communicates with Plaspy servers, what role the tracker reporting protocol plays, and practical considerations to get the device sending usable telemetry to Plaspy. This is a protocol overview intended for integrators, fleet managers, and technical users who need to understand connectivity and compatibility at a high level.

Plaspy accepts reports from many tracker models using shared connection settings and automatic protocol detection. Exact protocol behavior for the M70 can vary by firmware version, hardware revision, and manufacturer settings. The guidance here explains the connection context and compatibility considerations while encouraging verification of device specific details with the manufacturer documentation.

Protocol Overview​

The protocol used by a GPS tracker defines how location, sensor, and status information is packaged and transmitted from the device to a server. For the M70 this enables periodic position reports, alerts from movement and crash sensors, SOS notifications, and remote firmware updates when supported by the device and network.

  • Enables the M70 to send GPS and sensor data to a remote endpoint for processing and display.
  • Provides identification and session context so Plaspy can associate incoming data with the correct device account.
  • Carries alarm and status messages such as SOS alerts, low battery notifications, and motion or crash events.
  • Supports firmware updates and remote configuration when the tracker and network permit GPRS transfers.
  • Determines reporting cadence and payload content which affects battery life and data costs.
  • Works together with transport layer choices over mobile networks to reach Plaspy servers reliably.

How Plaspy Detects the Protocol​

Plaspy operates a shared ingestion endpoint and uses automatic detection to recognize and parse incoming messages from supported trackers. In most cases the platform will identify the M70 protocol automatically when the device is configured to report to the Plaspy endpoint.

  • Configure the M70 to report to Plaspy and the platform will attempt to detect the protocol automatically.
  • Use the Plaspy domain d.plaspy.com or the Plaspy server IP 54.85.159.138 as the destination for reports.
  • All devices in Plaspy use the same port and the platform relies on that shared port to manage incoming connections.
  • Devices may be configured to use UDP or TCP and Plaspy will accept either transport on the configured port.
  • Users typically do not need to manually select a protocol inside Plaspy once the device is properly pointed at the Plaspy endpoint.
  • If a device uses custom firmware or nonstandard reporting intervals, confirm settings and network behavior to ensure automatic detection succeeds.

Transport and Connection Context​

Transport selection and server addressing are essential to establishing a connection between the M70 and Plaspy. The M70 may transmit over mobile data using UDP or TCP depending on device configuration and firmware capabilities. For Plaspy connectivity, use the shared server address and port described below.

  • The M70 may be configured to send data using either UDP or TCP on port 8888.
  • Point the device to the Plaspy domain d.plaspy.com or to the Plaspy server IP 54.85.159.138 as the reporting endpoint.
  • Plaspy listens on port 8888 for all supported devices so the same port is used across models.
  • Transport choice can affect delivery behavior; UDP is lightweight while TCP provides connection oriented delivery where supported.
  • Ensure the tracker SIM, APN, and mobile data settings are configured to allow outbound connections to the Plaspy endpoint.
  • Network level firewalls or carrier restrictions can impact connectivity so validate outbound access to the domain or IP and the port.

Protocol Compatibility Notes​

  • Firmware versions can change the structure and frequency of reports. Always check the M70 firmware release notes for protocol changes.
  • Different hardware revisions or product variants may enable or disable specific sensors or messaging features.
  • Transport mode selection (UDP versus TCP) can be determined by device configuration or firmware defaults and may impact performance.
  • Manufacturer side configuration options such as SMS fallback, APN presets, or bundled SIM behavior may alter how data is sent to Plaspy.
  • Battery saving modes and reporting intervals affect how often the device transmits position and status updates.
  • Verify compatibility details against official GPSMarker documentation and, when possible, test a device on the Plaspy endpoint before large scale deployment.
  • Plaspy will attempt automatic protocol detection but devices with customized protocols or uncommon settings may require coordination with support.

Why Protocol Understanding Matters​

Understanding the tracker protocol helps ensure a reliable integration and reduces time spent on troubleshooting, configuration, and fleet scale rollouts. Knowing what the device sends and how often it reports enables better planning for data costs, battery life, and operational monitoring.

  • Helps diagnose connectivity issues by confirming the device is pointed at the correct Plaspy endpoint and port.
  • Informs decisions about reporting intervals to balance data costs and location granularity.
  • Clarifies how sensor events such as SOS, crash, or motion alerts are delivered and mapped into Plaspy.
  • Supports planning for over the air firmware updates and remote configuration capabilities.
  • Enables teams to set realistic expectations for battery life based on reporting patterns and sensor usage.
  • Improves long term reliability by aligning device settings with Plaspy ingestion behavior.

Why Use Plaspy with This Protocol​

The GPSMarker M70 provides a capable set of features including multi GNSS reception, long battery life modes, sensor inputs, and firmware updates over GPRS. When pointed at Plaspy, those capabilities can be translated into fleet visibility, alerting, and operational oversight without requiring per device protocol selection inside the platform. For organizations that need straightforward setup, consolidated device handling, and scalable data ingestion, using the M70 with Plaspy can simplify deployment and management while leveraging Plaspy automatic protocol detection.

Learn more about Plaspy on the main website https://www.plaspy.com. Please note that protocol support, firmware behavior, and device implementation details can change over time; verify the latest device specific protocol documentation and firmware guidance with the manufacturer at https://gpsmarker.ru/ before performing large scale rollouts or critical updates.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy