Skip to main content

Haicom - HI-602 Protocol

This page describes the public protocol context for using the Haicom HI-602 tracker with Plaspy. It explains, at a high level, how the device communicates with the Plaspy platform and what to consider when configuring the tracker for real time monitoring. The information here focuses on connection and compatibility context rather than device internals.

Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol once a device reports to the platform. Exact on device behavior can vary with firmware version, hardware revision, and manufacturer choices, so this page aims to provide practical guidance while encouraging validation against Haicom documentation.

Protocol Overview​

The HI-602 uses standard cellular and positioning technologies to report location and status to a remote server. Its communication protocol is the mechanism that packages GPS fixes, telemetry, and status indicators so Plaspy can process and display them. The protocol determines how the tracker identifies itself, how often it reports, and which fields are included in each transmission.

  • Enables the HI-602 to transmit GPS coordinates and basic status to a remote endpoint
  • Carries device identity information so Plaspy can associate messages with an asset
  • Encodes telemetry and optional messaging that Plaspy uses for mapping and event detection
  • Works over common cellular transports supported by the tracker for broad operator compatibility
  • Allows interoperable reporting so Plaspy can present live location and historical traces

How Plaspy Detects the Protocol​

Plaspy receives incoming traffic from many tracker models and automatically identifies the reporting format when a device is configured to send data to the Plaspy endpoint. In most cases, users do not need to choose a protocol inside Plaspy if the HI-602 is pointed to the correct server and port.

  • Plaspy listens on a single, shared port for all devices to simplify configuration
  • When the HI-602 reports to the Plaspy endpoint Plaspy attempts automatic detection of the reported format
  • Users typically only need to configure the tracker to report to the Plaspy endpoint to begin automatic detection
  • Automatic detection reduces manual setup steps but does not change device firmware behavior
  • If detection does not succeed, verifying device settings and manufacturer guidance is recommended

Transport and Connection Context​

The HI-602 can use cellular data or SMS based features to provide tracking. For live data reporting to Plaspy, the device may be configured to send GPRS data to the Plaspy endpoint. Plaspy provides a stable host and port that are publicly documented for device configuration.

  • Plaspy server domain for device reporting is d.plaspy.com
  • Plaspy server IP is 54.85.159.138
  • The platform listens on port 8888 for incoming tracker connections
  • The HI-602 may be configured to use either UDP or TCP on port 8888 depending on device support and network behavior
  • All devices in Plaspy use the same port which simplifies tracker configuration and fleet onboarding

Protocol Compatibility Notes​

  • Firmware releases from Haicom can change available commands, reporting fields, and default behaviors
  • Hardware revisions or optional feature sets on the HI-602 may affect which transport modes are supported
  • Some tracker features such as DTMF or SMS based tracking are outside the GPRS reporting path and behave differently
  • Selecting UDP versus TCP can impact delivery characteristics depending on mobile network and server routing
  • Always compare device settings to manufacturer documentation and confirm the device is pointed to d.plaspy.com or the provided IP
  • If a device does not appear in Plaspy after configuration, check APN, SIM status, and firmware compatibility

Why Protocol Understanding Matters​

Understanding how the HI-602 communicates helps ensure reliable setup, effective troubleshooting, and predictable long term operation in Plaspy. Knowing what the tracker will send and how the platform expects to receive it reduces integration friction and supports correct mapping of device events to operational needs.

  • Speeds initial setup by confirming the device is pointed to the correct Plaspy endpoint
  • Helps diagnose connectivity issues such as APN or transport mismatches
  • Clarifies whether a missing field is a device limitation or a configuration issue
  • Supports decisions about transport selection and reporting intervals for reliable coverage
  • Aids fleet administrators in planning firmware updates and validating continued compatibility

Why Use Plaspy with This Protocol​

The Haicom HI-602 offers flexible tracking options including GPS, GPRS, SMS, and DTMF that cover a wide range of use cases from personal tracking to asset monitoring. When the HI-602 reports over GPRS to the Plaspy endpoint, organizations gain centralized visibility into device location and basic telemetry through a single platform. Plaspy’s automatic protocol detection and consistent port configuration simplify device onboarding for mixed fleets.

To learn more about Plaspy and how it handles device reporting visit https://www.plaspy.com. For the latest device specific protocol details, firmware notes, and configuration instructions verify information on the official Haicom website http://www.haicom.com.tw/. Protocol support and firmware behavior can change over time so checking manufacturer resources is recommended.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy