Skip to main content

Haicom - HI-602X Protocol

This page describes the public protocol context for using the Haicom HI-602X tracker with Plaspy. It focuses on the communication and integration aspects that matter when directing the HI-602X to report location and status data to a Plaspy server. The technical features of the HI-602X such as GPRS based programming, remote firmware update capabilities, real time position links, flash memory for offline logging, motion sensing sleep modes, SMS commands, SOS alerts, and geo fencing are the operational capabilities that the reporting protocol conveys to a backend platform.

Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when a device reports to the platform. Plaspy accepts incoming device reports at the domain d.plaspy.com and the server IP 54.85.159.138 on port 8888. The device may be configured to use either UDP or TCP on port 8888 to reach Plaspy. Exact protocol behavior on the tracker can vary by firmware version, hardware revision, and manufacturer implementation, so users should validate device specific behavior against official Haicom documentation when needed.

Protocol Overview​

The HI-602X communication protocol is the mechanism used to move telemetry, position fixes, alerts, and remote configuration messages from the device into Plaspy. At a high level the protocol enables secure addressing of the platform, identifies the device, and delivers usable location and status data so Plaspy can display live position and history, trigger alerts, or apply remote commands where supported by the tracker.

  • Provides device identification and session context so Plaspy can associate incoming reports with an asset record.
  • Carries GPS position, timestamp, movement state, and sensor or input statuses for location and diagnostics.
  • Transports remote configuration and management messages that can be used for APN, interval, and firmware update operations.
  • Conveys alerts such as SOS, geo fence events, or power and motion changes that are actionable in Plaspy.
  • Supports delivery over GPRS so the unit can operate as a live tracker and as a data logger for later upload when connectivity resumes.

How Plaspy Detects the Protocol​

Plaspy receives data on a common endpoint and port and determines how to interpret incoming messages automatically. When the HI-602X is configured to report to Plaspy, the platform will detect the format and populate the device record without requiring manual protocol selection in most cases.

  • Plaspy listens for device reports at d.plaspy.com and at the server IP 54.85.159.138 on port 8888.
  • All devices in Plaspy use the same port, which simplifies device provisioning.
  • Plaspy automatically detects the tracker protocol when data arrives at the platform endpoint.
  • Users typically do not need to select a protocol inside Plaspy if the device is configured to report to the Plaspy endpoint.
  • Ensure the device is configured with the correct APN and reporting address so the platform can receive the initial connection and perform detection.

Transport and Connection Context​

Connection choices on the HI-602X determine how packets are transmitted to Plaspy but do not change the fact that the platform expects reports at the same endpoint and port. Network configuration and the device transport mode are important for reliable delivery, especially in mobile or NATed network environments.

  • The device may be configured to use UDP or TCP on port 8888 depending on device support and user configuration.
  • Devices can be pointed to d.plaspy.com or directly to 54.85.159.138 as the reporting endpoint.
  • Port 8888 is used across the Plaspy platform for all supported devices, so firewall and NAT rules should allow outbound traffic to that port.
  • Choose UDP when low overhead and speed are prioritized and the device supports it; choose TCP when reliable delivery and session orientation are preferred and supported by the tracker.
  • Verify APN settings and SIM data plan to ensure GPRS connectivity and data transfer to the Plaspy endpoint.

Protocol Compatibility Notes​

  • Firmware revisions can alter message timing, supported fields, and behavior for remote commands or firmware updates; check the device firmware level when diagnosing issues.
  • Different hardware batches or variations in the X series may expose slightly different feature sets or transport options.
  • Transport selection between UDP and TCP is configurable on many units and affects delivery guarantees and firewall requirements.
  • Some features described by the manufacturer such as SMS fallback, SOS links, or map hyperlink delivery depend on both device firmware and how the backend platform chooses to present data.
  • Validate APN, reporting address, and interval settings on the device before performing wide scale deployments.
  • Manufacturer documentation is the authoritative source for device specific commands, SMS syntax, and firmware related behavior.

Why Protocol Understanding Matters​

Understanding how the HI-602X communicates helps operators set up reliable reporting, troubleshoot connectivity issues, and manage expected device behavior over time. Clear awareness of transport and protocol behavior reduces deployment friction and improves long term data quality in Plaspy.

  • Speeds up troubleshooting when devices do not appear in Plaspy by checking transport, endpoint, APN, and firmware.
  • Helps determine whether missing history is due to local logging behavior or delivery problems on the GPRS link.
  • Informs choices about reporting intervals, sleep modes, and motion sensor behavior to balance battery life and update frequency.
  • Clarifies expectations for remote management functions such as over the air configuration and firmware updates.
  • Allows administrators to prepare network firewalls and carrier settings to permit traffic to the Plaspy endpoint.

Why Use Plaspy with This Protocol​

Using the Haicom HI-602X with Plaspy provides a straightforward path to live location, history playback, and event monitoring for vehicles and mobile assets. The HI-602X capabilities for GPRS programming, offline logging, SMS alerts, motion based sleep modes, and SOS or geo fence notifications pair well with Plaspy’s ability to ingest and present that data for fleet operations and asset monitoring.

Plaspy simplifies deployment by using a single, consistent port for all devices and by automatically detecting the tracker protocol when a unit reports to the platform. To learn more about the Plaspy platform and how it integrates with devices like the HI-602X visit https://www.plaspy.com. Protocol support, firmware behavior, and device implementation details can change over time, so please verify the latest device specific information with Haicom at http://www.haicom.com.tw/

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy