LK-GPS - LK106 Protocol
This page documents the public protocol context for using the LK-GPS LK106 tracker with the Plaspy platform. It focuses on how the device communicates with Plaspy in high level terms and what to check when integrating the LK106 for live tracking and event reporting. This is intended for administrators and integrators who need a clear, non sensitive overview of how the tracker exchanges telemetry with Plaspy.
Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when the device reports to the Plaspy endpoint. Exact protocol behavior can vary by firmware version, hardware revision, and manufacturer implementation, so treat this page as a connectivity and protocol context resource rather than a replacement for the device manual.
Protocol Overview
The protocol is the set of rules that the LK106 uses to send position fixes, alerts, and status updates to a server. At a public level, understanding the protocol lets you confirm the device is pointed at Plaspy and that expected events such as GPS positions, SOS alerts, and battery reports are arriving at the platform.
- Enables periodic and event driven transmission of GPS and telemetry data from the LK106 to a remote server.
- Provides the means for the tracker to identify itself so the platform can associate incoming data with the correct device record.
- Carries actionable events such as SOS alarms, geofence triggers, movement alerts, and battery status for use in Plaspy dashboards and rules.
- Supports fallbacks such as SMS configuration for environments without mobile data so device settings and basic alerts remain possible.
- Works together with transport settings (TCP or UDP) and server endpoint configuration to deliver reliable reporting to Plaspy.
How Plaspy Detects the Protocol
Plaspy receives incoming connections on its shared endpoint and uses that intake to determine which tracker protocol a device is using. In most cases, when an LK106 is configured to report to Plaspy, no manual protocol selection inside the platform is required.
- Plaspy listens on a single port for all supported devices and automatically detects the tracker protocol used by incoming connections.
- Devices should be configured to report to the Plaspy server address for automatic detection to occur.
- If the LK106 is correctly pointed at the Plaspy endpoint, the platform will associate incoming telemetry with the device automatically.
- Typical integration tasks are limited to configuring the device APN and reporting address so the tracker can reach Plaspy.
- If you encounter unexpected behavior, check the device firmware version and reporting configuration before changing platform settings.
Transport and Connection Context
The LK106 can send telemetry over the mobile network using either UDP or TCP depending on the device configuration and firmware capabilities. Plaspy provides a single, consistent endpoint and port that the tracker can target for reporting.
- Plaspy server domain for device reporting is d.plaspy.com.
- Plaspy server IP address for direct device configuration can be 54.85.159.138.
- The network port used by Plaspy for device connections is 8888 and all devices supported by Plaspy use this same port.
- The LK106 may be configured to use UDP or TCP on port 8888 depending on device support and chosen transport.
- Ensure the device APN and SIM settings allow outgoing connections to the Plaspy endpoint and that mobile network rules permit the chosen transport.
Protocol Compatibility Notes
- Firmware differences can change how and which fields the device includes in telemetry, so confirm expected behavior for your firmware build.
- Hardware revisions or regional variants of the LK106 may have slight reporting differences; verify the device model and revision when troubleshooting.
- Manufacturer configuration options such as SMS fallback, reporting interval, and movement wake modes affect the volume and timing of data Plaspy receives.
- Transport selection (UDP vs TCP) may affect reliability in certain network environments; test the preferred transport under real conditions.
- Pointing devices to d.plaspy.com or the numeric IP 54.85.159.138 on port 8888 is the standard connection approach for Plaspy ingestion.
- Always validate compatibility and configuration recommendations against the official LK-GPS documentation for the specific device and firmware.
Why Protocol Understanding Matters
Knowing the public protocol context helps ensure a smooth setup, faster troubleshooting, and predictable operational behavior when the LK106 is used with Plaspy. Even without deep protocol internals, awareness of what the tracker sends and how Plaspy receives it reduces integration friction.
- Speeds initial setup by confirming the device is pointed at the correct Plaspy endpoint and port.
- Improves troubleshooting by clarifying whether an issue is due to transport, device config, or network conditions.
- Helps tune reporting intervals and event settings to balance battery life and positional freshness.
- Clarifies how alerts such as SOS and geofence events should appear in Plaspy, aiding rule configuration and notification routing.
- Encourages verification of firmware release notes when a behavior change is observed after updates.
Why Use Plaspy with This Protocol
Using the LK106 with Plaspy gives organizations compact, discreet tracking combined with a platform that ingests live location and event data for monitoring, alerts, and operational visibility. For personal safety, asset protection, and light telemetry use cases, the LK106 delivers a small form factor and features such as SOS alarms and movement alerts that map naturally into Plaspy workflows.
To learn more about Plaspy and how the platform handles device connectivity and telemetry, visit https://www.plaspy.com. For the latest device specific protocol details, firmware notes, and manufacturer guidance for the LK106, verify current information on the official LK GPS site at https://www.lk-gps.com.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.