LK-GPS - LK710 Protocol
This page describes the public protocol context for using the LK-GPS LK710 tracker with the Plaspy platform. It focuses on how the tracker reports location and telemetry information to Plaspy, what role the communication protocol plays in that process, and what to check during setup and validation. The LK710 is a compact waterproof tracker with MTK2503 GPS positioning, quad band GSM GPRS telemetry, battery reporting, and remote immobilizer capability, all of which are relevant to how the unit communicates with a cloud platform.
Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when the unit is correctly pointed at the Plaspy endpoint. Exact protocol behavior and available commands can vary by device firmware, hardware revision, and manufacturer implementation, so it is important to verify device specifics and firmware release notes from the manufacturer when needed.
Protocol Overview
The device protocol defines how the LK710 formats and sends telemetry, how it identifies itself to a server, and how command and control messages are exchanged for functions such as immobilizer control and configuration. For Plaspy integration this protocol ensures location, battery status, and other telemetry arrive in a format the platform can process and present.
- Carries periodic GPS coordinates and status updates so Plaspy can render live maps and history.
- Delivers device identification and telemetry fields that allow Plaspy to associate records with the correct vehicle or asset.
- Transports event messages such as motion, power loss, low battery, and immobilizer actions so Plaspy can trigger alerts and workflows.
- Provides a channel for remote commands and configuration when supported by the device, enabling features like remote fuel cut or device parameter changes.
- Enables fallback communications such as SMS based queries or controls when GPRS is unavailable and the device supports SMS.
How Plaspy Detects the Protocol
Plaspy receives incoming connections on a shared endpoint and port and applies automatic protocol detection to determine how to interpret incoming data. In most cases, if the LK710 is configured to report to the Plaspy endpoint using the correct network settings, no manual protocol selection is required inside Plaspy.
- Plaspy listens for tracker traffic on the common endpoint d.plaspy.com and on the public server IP 54.85.159.138.
- All devices in Plaspy use the same port so device reports are centralized on one well known port.
- Plaspy automatically detects the tracker protocol so users do not normally need to choose a protocol manually if the device reports to the Plaspy endpoint.
- Correct device identification and reporting settings on the LK710 side are the usual prerequisites for automatic detection to succeed.
- If a device does not appear to connect, checking device APN, server host, transport mode, and firmware version is a practical first step.
Transport and Connection Context
The LK710 can send telemetry over the cellular link using either UDP or TCP depending on device configuration and firmware capabilities. For Plaspy integration it is important to point the device to the correct host and port and to match the transport protocol to what the device supports.
- The LK710 may be configured to use either UDP or TCP transport on port 8888.
- Devices may be set to report to the Plaspy domain d.plaspy.com or directly to the server IP 54.85.159.138.
- Plaspy uses port 8888 for all supported devices so the same port applies across the fleet.
- Choosing UDP or TCP is done on the device side and should reflect what the current firmware and carrier conditions support.
- Cellular connectivity and correct APN settings are required for GPRS reporting to reach Plaspy.
Protocol Compatibility Notes
- Firmware revisions can change available fields, reporting intervals, and optional command support on the LK710.
- Hardware revisions or OEM modifications may alter interface behavior or available voltages and should be validated with device serial and model markings.
- Some manufacturers provide SMS fallback options; verify whether your LK710 firmware supports SMS queries and the exact command syntax.
- Transport selection between UDP and TCP is device side and affects how the tracker should be configured to reach Plaspy on port 8888.
- Manufacturer configuration utilities or SMS commands are commonly used for initial server and APN settings; follow manufacturer guidance when available.
- Always validate connectivity after configuration by confirming the device is visible within Plaspy and sending expected telemetry.
Why Protocol Understanding Matters
A clear understanding of the LK710 communication protocol helps with correct initial setup, faster troubleshooting, and reliable long term operation when devices report to Plaspy. Even though Plaspy detects protocols automatically, knowing the device capabilities and limitations reduces setup time and prevents common misconfigurations.
- Ensures server host and transport settings on the device match Plaspy expectations so reports arrive without loss.
- Helps diagnose connectivity issues by narrowing whether a problem is network, transport, firmware, or configuration related.
- Allows teams to plan for expected telemetry frequency and battery behavior in order to tune alerts and reporting on Plaspy.
- Supports informed decisions about using SMS fallback or remote command options when GPRS coverage is inconsistent.
- Reduces downtime by guiding firmware and hardware checks when device behavior differs from expectations.
Why Use Plaspy with This Protocol
Using the LK710 with Plaspy provides a practical combination for organizations that need compact, discreet asset tracking with remote immobilizer control and straightforward cloud reporting. Plaspy ingests location and telemetry from LK710 units to deliver live maps, history, alerts, and event driven workflows that support fleet management and anti theft operations.
To learn more about Plaspy and how it handles device integrations, visit https://www.plaspy.com. For the latest device specific protocol details, firmware notes, and manufacturer guidance please verify information on the official LK GPS site https://www.lk-gps.com. Protocol support and firmware behavior can change over time so checking manufacturer documentation ensures the most current and accurate device information.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.