Skip to main content

Maxtrack - MXT-141 Protocol

This page describes the public protocol context for using the Maxtrack MXT-141 with the Plaspy platform. It focuses on how the device communicates in broad, non-sensitive terms and how those communications map to Plaspy's shared connection settings. The MXT-141 combines GNSS tracking with an embedded accessory wireless circuit, a 2.4 GHz secondary network, RPM and odometer inputs, and an accelerometer for movement and stoppage detection, all of which inform the telemetry that can be delivered to a backend like Plaspy.

Plaspy uses unified connection settings across supported devices and automatically detects the tracker protocol when a device is correctly reporting to the platform. For MXT-141 deployments this means devices should be configured to report to the Plaspy endpoint; exact protocol behavior can vary by firmware version, hardware revision, and manufacturer implementation and should be validated against Maxtrack documentation when needed. Plaspy's public endpoint information used for device reporting is d.plaspy.com and the server IP 54.85.159.138 on port 8888. The device may be configured using UDP or TCP on port 8888 and Plaspy uses the same port for all devices.

Protocol Overview​

The MXT-141 tracking protocol (as implemented by the device firmware) is the mechanism by which the unit reports position, inputs, movement events, and accessory status to a backend server like Plaspy. The protocol governs how the tracker identifies itself, how telemetry and alarms are packaged, and how occasional acknowledgements or commands may be exchanged over the network link.

  • Provides a structured channel for the tracker to report GNSS position, odometer and RPM inputs, and accelerometer events.
  • Conveys status and diagnostic information that Plaspy can use to present operational state and alerts.
  • Includes identifiers that allow Plaspy to associate incoming messages with a specific device and account.
  • Supports transport over common IP protocols so the MXT-141 can report to Plaspy using the platform endpoint.
  • Allows accessory and secondary network data to be reflected in higher level event processing when the firmware exposes that information.

How Plaspy Detects the Protocol​

Plaspy receives reporting from devices on a single, consistent endpoint and uses that input to determine the appropriate protocol handling for each device. In most cases you do not need to select a protocol manually inside Plaspy if the MXT-141 is configured to point to the correct Plaspy endpoint and port.

  • Plaspy listens for device reports at d.plaspy.com and the public server IP 54.85.159.138 on port 8888.
  • The platform accepts device connections over TCP or UDP using port 8888 and uses the incoming data to determine protocol compatibility.
  • Plaspy automatically detects the tracker protocol for devices reporting to the shared Plaspy port, reducing manual configuration requirements.
  • Proper device identification in the initial messages helps Plaspy associate the unit with the correct account and data model.
  • If a tracker is not being detected automatically, verify that the device is configured to report to d.plaspy.com or 54.85.159.138 and that it is using port 8888 with a supported transport.

Transport and Connection Context​

Connection settings are a core part of integration but do not expose internal message formats. The MXT-141 can be configured to use different network transports depending on firmware and deployment choices. Understanding the transport context helps ensure reliable delivery of telemetry to Plaspy.

  • The tracker may be configured to send data over UDP or TCP on port 8888 depending on device support and configuration choices.
  • Devices can point to the Plaspy hostname d.plaspy.com or to the server IP 54.85.159.138 as the reporting endpoint.
  • Plaspy uses port 8888 for all supported devices, so the same outbound port configuration on the device simplifies fleet-wide deployments.
  • Network considerations such as NAT, firewalls, and mobile operator behavior can affect whether UDP or TCP is preferable for a given installation.
  • Confirm that the device firewall and APN settings allow outbound traffic to the Plaspy endpoint on port 8888.

Protocol Compatibility Notes​

  • Firmware revisions can change message content or available telemetry fields; always confirm the MXT-141 firmware level when validating behavior.
  • The MXT-141 shares its platform lineage with the MXT-151, so many characteristics are similar, but model-specific features like the secondary 2.4 GHz circuit and extra inputs can affect reported data.
  • The 2.4 GHz embedded accessory network is primarily for local accessory communication and may not be part of the WAN reporting protocol to Plaspy.
  • Hardware revisions or optional accessory modules can alter available I/O and event reporting behavior.
  • Selecting UDP versus TCP on the device can change delivery semantics and should be chosen according to network reliability and point-to-point testing.
  • Validate compatibility against Maxtrack's official documentation and release notes for device specific details.

Why Protocol Understanding Matters​

A practical understanding of the MXT-141 communication protocol helps with setup, reliable reporting, and operational troubleshooting when devices are used with Plaspy. Knowing what the tracker reports and how it connects simplifies onboarding and reduces deployment time.

  • Ensures devices are configured to report to d.plaspy.com or 54.85.159.138 on port 8888 using the intended transport.
  • Helps interpret reported telemetry such as GPS, RPM, odometer, and accelerometer events in Plaspy dashboards.
  • Aids in troubleshooting connectivity issues related to transport, firewall, or APN settings.
  • Guides decisions about firmware updates and feature enablement that affect reporting behavior.
  • Supports planning for accessory integration that uses the MXT-141 secondary communication circuit.

Why Use Plaspy with This Protocol​

Using the MXT-141 with Plaspy provides a straightforward path to capture the device's telemetry and accessory-aware capabilities in a single backend. Plaspy's automatic protocol detection and unified port approach simplify fleet integration so you can focus on operational insights instead of device-by-device configuration.

To learn more about Plaspy and how it supports device integrations like the Maxtrack MXT-141, visit https://www.plaspy.com. For the most current device specific protocol details, firmware notes, and hardware information, verify the official Maxtrack documentation at https://maxtrack.com.br. Protocol support and firmware behavior can change over time, so checking manufacturer resources is recommended for precise integration requirements.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy