Meitrack - GT-60 Protocol
This page describes the public protocol context for using the Meitrack GT-60 with Plaspy. It focuses on how the device communicates at a high level with Plaspy servers, what connection settings are commonly used, and what to consider when integrating the tracker into a fleet or pet tracking deployment. The GT-60 is a compact GPS tracker designed for pet tracking and personal use; it reports location via cellular networks and can also act as a portable emergency phone.
Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when a device reports to the Plaspy endpoint. Exact protocol behavior can vary by firmware version, hardware revision, and manufacturer implementation, so this page provides general guidance and practical context without exposing firmware internals or parsing details.
Protocol Overview
The tracker communication protocol is the set of rules the GT-60 uses to send its telemetry and control information to a remote server. In practice this protocol enables the device to identify itself, deliver location and status data, and receive optional remote commands when supported by the device and network. Plaspy consumes that incoming data to present live and historical location, alerts, and device status to users.
- Enables the GT-60 to transmit position, timestamps, and basic device status to a remote endpoint
- Carries identity information so Plaspy can associate incoming messages with the correct device record
- Supports periodic and event driven reporting so location updates align with user needs such as geofences or low battery alerts
- Provides a channel for the server to send configuration or command messages when the device supports two way communication
- Acts as the foundation that lets Plaspy translate raw device reports into usable map points, alerts, and logs
How Plaspy Detects the Protocol
Plaspy is designed to accept reports from a wide range of trackers using a single shared server endpoint and port. When a GT-60 or other supported device is correctly configured to report to Plaspy, the platform automatically determines the tracker protocol used and routes the data to the appropriate processing pipeline. This means manual protocol selection in the platform is often unnecessary for properly configured devices.
- Plaspy uses a shared server endpoint at d.plaspy.com for device reports
- The Plaspy server is also reachable at the public IP address 54.85.159.138
- All devices in Plaspy use the same port number 8888 which simplifies device configuration
- Plaspy automatically detects the tracker protocol when the device begins reporting to the shared endpoint
- Users typically only need to configure the device to report to d.plaspy.com or the IP and the correct transport to start integration
Transport and Connection Context
Connection transport choices and DNS targets are part of how a GT-60 reaches the Plaspy service. Depending on the tracker firmware and the device configuration interface, the GT-60 may be set to use UDP or TCP. Plaspy accepts both transports on the standard port, so choosing between UDP and TCP depends on device support and operator preference.
- Devices may be configured to report to d.plaspy.com as the server address
- The Plaspy server IP 54.85.159.138 is an alternative endpoint that some installers use
- The GT-60 may be configured to use either UDP or TCP on port 8888 depending on firmware and configuration tools
- Plaspy accepts both UDP and TCP connections on port 8888 for all supported devices
- Using the shared port and endpoint reduces configuration steps when deploying multiple device models
Protocol Compatibility Notes
- Firmware and hardware revisions of the GT-60 can change reported fields and supported features; confirm details for the device firmware you have
- Manufacturer configuration menus sometimes expose different transport and server options across firmware releases
- Choosing UDP or TCP can affect reliability under certain network conditions; select the transport supported and recommended by your firmware
- Plaspy accepts the device on the shared endpoint and port but the specific features available depend on the device firmware and manufacturer implementation
- Validate that the GT-60 is configured to send to d.plaspy.com or 54.85.159.138 and to use port 8888 to ensure connectivity to Plaspy
- When in doubt, consult the device configuration guide or the manufacturer for device specific settings that influence protocol behavior
Why Protocol Understanding Matters
A practical understanding of the GT-60 communication protocol and connection context helps ensure reliable reporting, timely troubleshooting, and predictable long term operation when using Plaspy. Even when Plaspy automatically detects a protocol, knowing the transport choices, server targets, and factors that vary by firmware will speed diagnostics and reduce deployment friction.
- Speeds troubleshooting when a device fails to report by focusing on server address, transport, and port first
- Helps choose the right transport setting for your network and SIM provider
- Informs expectations about which device features will be available to Plaspy based on firmware capabilities
- Reduces downtime by clarifying what to check before contacting support
- Supports consistent configuration across multiple GT-60 units in a fleet or pet tracking deployment
Why Use Plaspy with This Protocol
Using the Meitrack GT-60 with Plaspy provides a straightforward path to consolidate location data, alerts, and device status into a single monitoring platform. For organizations and individuals tracking pets or using the GT-60 as a personal safety device, integrating with Plaspy yields centralized visibility, historical location data, and a consistent device management experience.
If you want to learn more about Plaspy and how it handles tracker integrations, visit https://www.plaspy.com. For the latest device specific protocol details, firmware notes, and configuration instructions consult the manufacturer at https://www.meitrack.com/ since protocol support and firmware behavior can change over time.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.