Navis - Señal CH - 4713 Protocol
This page provides a public protocol overview for using the Navis Señal CH 4713 vehicle tracker with Plaspy. It focuses on connection and reporting concepts that matter when integrating the CH 4713 into a fleet monitoring workflow. The content highlights how the device can communicate position and status to a monitoring platform without exposing private implementation details.
Plaspy uses a shared connection endpoint and unified port across supported devices and will automatically detect the tracker protocol once the device reports to the correct destination. Plaspy server domain is d.plaspy.com and Plaspy server IP is 54.85.159.138. The port is 8888. The device may be configured using UDP or TCP on port 8888 and all devices in Plaspy use the same port. Exact message behavior can vary by firmware version, hardware revision, and manufacturer implementation, so validate device specific options against official Navis documentation.
Protocol Overview
The communication protocol for the CH 4713 governs how the tracker identifies itself, transmits GNSS fixes and vehicle telemetry, and receives remote configuration. On a high level the protocol enables the tracker to exchange actionable data with a monitoring center so that position, status, and event information are usable by Plaspy and downstream systems.
- Enables regular transmission of GNSS coordinates and velocity for real time monitoring
- Conveys vehicle inputs and outputs status such as digital and analog sensors to a monitoring server
- Supports over the air configuration so settings can be updated remotely by the monitoring center
- Carries device identity and session information that lets Plaspy associate reports with the correct asset
- Allows the device to send optimized message lengths to conserve bandwidth while preserving needed fields
How Plaspy Detects the Protocol
Plaspy receives data from devices on a unified endpoint and port and automatically identifies the tracker reporting protocol when correctly addressed. In most cases you do not need to select a protocol manually in the Plaspy interface when the device is configured to report to the Plaspy endpoint.
- Point the device to d.plaspy.com or to 54.85.159.138 and ensure the transport and port match the device settings
- Use either UDP or TCP depending on device capabilities and configuration needs
- Plaspy listens on port 8888 for all supported devices so the same numeric port is used across trackers
- If the device sends regularly and includes its identity, Plaspy will match reports to the correct asset automatically
- Confirm device reporting intervals and event triggers in the tracker configuration to align with Plaspy expectations
Transport and Connection Context
Connection setup is a practical concern when deploying the CH 4713 in the field. The CH 4713 supports cellular data networks and can report using standard internet transports to Plaspy. These details help ensure devices reach the Plaspy server reliably.
- The device may be configured to use UDP or TCP on port 8888 depending on device options and network reliability requirements
- Devices can be set to report to d.plaspy.com or to the numeric IP 54.85.159.138 if DNS is unavailable
- Plaspy uses port 8888 for all devices so you do not need to manage multiple ports for different models
- The CH 4713 supports GSM GPRS based data communication which is suitable for reporting to Plaspy over cellular networks
- Choose TCP for sessions that require a connection orientation and UDP for lower latency and simpler packet delivery when supported
Protocol Compatibility Notes
- Firmware variations can introduce differences in available commands and message behavior between device units
- Hardware revisions sometimes alter supported inputs or features so verify the unit serial and revision as part of validation
- Manufacturer configuration defaults may point to different endpoints by default so update the destination to Plaspy settings as needed
- Transport selection matters for firewalls and NAT behavior so confirm network paths allow TCP or UDP to port 8888
- Over the air configuration capabilities depend on the device firmware and must be enabled and tested for remote updates
- Always compare observed device behavior against Navis documentation when a feature appears missing or different
Why Protocol Understanding Matters
A clear understanding of the tracker communication protocol reduces deployment friction and shortens troubleshooting when devices do not appear in the monitoring platform. Knowing what data the CH 4713 sends and how it connects helps operations and technical teams get reliable fleet visibility.
- Faster diagnosis when a device stops reporting because you can confirm endpoint, transport, and network reachability
- Better configuration choices for reporting intervals and event triggers to balance data granularity and bandwidth
- Improved security posture by ensuring remote configuration channels and identification features are used as intended
- More predictable handling of telemetry such as driver identification and input state changes within Plaspy
- Easier coordination with manufacturer support when device behavior diverges from expectations
Why Use Plaspy with This Protocol
Using the Navis Señal CH 4713 with Plaspy gives fleet operators reliable location and vehicle state visibility while taking advantage of Plaspy automatic protocol detection and unified connection settings. The CH 4713 features such as assisted GNSS, over the air configuration, driver identification, and message length optimization pair well with Plaspy for routine monitoring and operational workflows.
Learn more about Plaspy and how it integrates with vehicle trackers at https://www.plaspy.com. For the most current, device specific protocol details and firmware information consult the manufacturer at http://navis.ru/ since protocol support and device behavior can change over time.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.