Skip to main content

Navtelekom - SIGNAL S-2653 Protocol

This page provides a public, non sensitive overview of the communication context for the Navtelekom SIGNAL S-2653 when used with Plaspy. It explains how the tracker reports position and telemetry to Plaspy and which connection settings are commonly used for integration. The goal is to help technicians, integrators, and fleet managers understand the role of the device protocol in a Plaspy deployment without exposing private implementation details.

Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when the device reports to the correct endpoint. Exact protocol behavior and message content can vary by firmware version, hardware revision, and manufacturer implementation, so this page focuses on the publicly useful connection and compatibility guidance rather than device internals.

Protocol Overview​

The communication protocol of the SIGNAL S-2653 is the mechanism that allows the tracker to identify itself, report GNSS position and vehicle telemetry, and deliver event data and status to a backend platform such as Plaspy. Plaspy consumes those reports to present real time location, alerts, and historical telemetry to users.

  • Enables periodic and event driven position reporting from the device to a remote server for real time tracking.
  • Carries vehicle bus and sensor telemetry collected via CAN, RS-485, and universal inputs for telematics analysis.
  • Supports onboard fallback by allowing logged data from the SD card and battery backed logging to be reconciled with server records when connectivity returns.
  • Allows the device to send status and diagnostics that help Plaspy determine device health and connectivity state.
  • Facilitates remote command workflows such as output control when used with a platform that supports command and control.

How Plaspy Detects the Protocol​

Plaspy uses a shared endpoint and port for device reporting and automatically detects the tracker protocol used by incoming connections. When the SIGNAL S-2653 is configured to report to Plaspy, no manual protocol selection is typically required inside Plaspy provided the device is correctly pointed at the Plaspy endpoint.

  • Plaspy's public server domain for device reporting is d.plaspy.com.
  • Plaspy accepts device connections on IP 54.85.159.138 and listens on port 8888.
  • All devices in Plaspy use the same port, simplifying device configuration and onboarding.
  • Plaspy can automatically identify the protocol and map incoming messages to device records when the device reports to the Plaspy endpoint.
  • Users normally configure the tracker to report to the Plaspy endpoint and verify data arrival rather than selecting a protocol manually in most deployments.

Transport and Connection Context​

The SIGNAL S-2653 can be configured to use standard transport protocols for reporting depending on device settings and network environment. Understanding the transport options and endpoint choices is important for firewall rules, operator settings, and correct device commissioning.

  • The device may be configured to use either UDP or TCP transport when reporting to Plaspy on port 8888.
  • Devices can be pointed to the Plaspy server domain d.plaspy.com or directly to the IP address 54.85.159.138 depending on installer preference or network constraints.
  • Plaspy uses the same port number 8888 for all supported devices to simplify setup across different tracker models.
  • Dual SIM operation in the S-2653 provides redundancy for cellular connectivity but does not change the Plaspy endpoint or port used for reporting.
  • Confirm that carrier networks and on vehicle gateways allow outbound UDP or TCP traffic to the Plaspy endpoint and port.

Protocol Compatibility Notes​

  • Firmware revisions may add, remove, or change message fields and reporting behavior; always check the installed firmware release notes for device specific behavior.
  • Hardware revisions and optional interfaces such as CAN or RS-485 can affect which telemetry items are available to transmit to Plaspy.
  • Manufacturer configuration tools and official documentation should be used to set the device to report to d.plaspy.com or 54.85.159.138 on port 8888 using UDP or TCP as appropriate.
  • Transport selection matters for network behavior and reliability; use TCP where guaranteed delivery is preferred and UDP where lower latency and simpler payloads are acceptable and supported.
  • Onboard SD logging and the backup battery provide a data resilience strategy that complements live reporting; validate how and when logged records are transmitted after connectivity is restored.
  • Validate compatibility and any region specific cellular band support with manufacturer documentation to ensure the device will operate as expected on the chosen mobile networks.

Why Protocol Understanding Matters​

A practical understanding of the SIGNAL S-2653 communication protocol and its interaction with Plaspy helps ensure successful commissioning, reliable reporting, and efficient troubleshooting when devices are deployed at scale.

  • Reduces setup time by ensuring the device is pointed to d.plaspy.com or 54.85.159.138 on port 8888 using the correct transport.
  • Helps diagnose connectivity problems by confirming whether the device is using UDP or TCP and whether messages reach the Plaspy endpoint.
  • Improves data reliability planning by aligning device logging and battery fallback behavior with Plaspy ingestion expectations.
  • Enables informed decisions around firmware updates and hardware revisions that may affect telemetry availability.
  • Supports effective rule and alert configuration in Plaspy by clarifying which telemetry and event data the tracker can send.

Why Use Plaspy with This Protocol​

Using the SIGNAL S-2653 with Plaspy provides a practical combination for fleets that need rugged vehicle hardware and a platform capable of ingesting position and extensive telemetry. The S-2653’s GNSS capabilities, dual SIM redundancy, CAN and RS-485 interfaces, and onboard logging pair well with Plaspy’s automatic protocol detection and unified reporting endpoint to deliver consistent tracking and diagnostics.

If you want to learn more about how Plaspy handles device connectivity, reporting, and telematics workflows visit https://www.plaspy.com. For the most current device specific protocol details, firmware notes, and installation guides always verify information with the manufacturer at https://www.navtelecom.ru/ as protocol support and firmware behavior can change over time.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy