Noran - NR200 Protocol
This page describes the public protocol context for using the Noran NR200 Magnetic Wireless GPS Tracker with the Plaspy platform. It focuses on how the device communicates with Plaspy in general terms, what connection settings are used publicly by Plaspy, and the practical considerations to get reliable reporting and telemetry into your fleet or asset management workflow.
Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when the tracker reports to the Plaspy endpoint. Exact protocol behavior for the NR200 can vary by firmware version, hardware revision, and manufacturer implementation, so this page provides safe, public-facing context while encouraging verification against manufacturer documentation.
Protocol Overview
The NR200 communicates telemetry, position fixes, and alarm events to remote servers using standard transport methods supported by the device. The tracker can report periodic location updates and alert events that Plaspy ingests to provide real time monitoring, history playback, and operator notifications.
- Enables the device to deliver GPS and aided location data to Plaspy for live tracking and history.
- Carries alarm and status telemetry such as geo fence triggers, overspeed notices, and battery state.
- Allows alternate reporting paths including TCP, UDP, HTTP, and SMS where supported by the device and network.
- Lets Plaspy correlate NR200 position and telemetry with other fleet signals when available in a telematics stack.
- Supports configurable reporting intervals and sleep modes to balance battery life and update frequency.
How Plaspy Detects the Protocol
Plaspy listens on a shared public endpoint and port for incoming reports from many tracker models and automatically determines the tracker protocol when data arrives. This removes the need for most users to select a protocol manually inside Plaspy as long as the NR200 is configured to report to the Plaspy endpoint.
- Plaspy server domain for device reporting is d.plaspy.com which resolves to public endpoints.
- Plaspy server IP publicly known for reporting is 54.85.159.138 and is reachable for device testing.
- Plaspy uses a single common port for device connections which is 8888 for all supported devices.
- Devices may be configured to use either UDP or TCP on port 8888 depending on the NR200 configuration and carrier behavior.
- When the NR200 is pointed to the Plaspy endpoint and port, the platform automatically handles protocol detection and routing of telemetry.
Transport and Connection Context
Connection choices on the NR200 determine how the tracker reaches Plaspy and how reliable reporting will be in a given environment. The NR200 supports common cellular reporting transports and can fall back to SMS for some notification types, which provides flexibility for remote or low coverage areas.
- The NR200 may be configured to send data over TCP or UDP on port 8888 to the Plaspy service.
- Devices can be set to report to the Plaspy server domain d.plaspy.com or directly to the IP address 54.85.159.138.
- Plaspy uses the same port 8888 for all devices which simplifies device configuration and mass deployment.
- Depending on cellular network behavior and configuration choices, UDP can reduce overhead while TCP can provide connection reliability.
- SMS reporting is available as an alternate channel for alerts and limited updates where SMS is preferred or required.
Protocol Compatibility Notes
- Firmware versions can change message timing, available fields, or supported transports; always confirm the unit firmware level when troubleshooting.
- Hardware revisions or production variations from the manufacturer may introduce subtle behavior differences in reporting or power management.
- Choosing TCP versus UDP on the NR200 affects delivery characteristics and should be matched to network conditions and operational needs.
- SMS remains a viable fallback for alerts but is not a replacement for full telemetry when real time tracking is required.
- Plaspy automatically detects protocol when the device reports to d.plaspy.com or 54.85.159.138 on port 8888 but correct device configuration is required.
- Validate compatibility and any firmware specific settings by reviewing the official Noran documentation for your device batch.
Why Protocol Understanding Matters
A practical understanding of the NR200 communication protocol helps ensure correct setup, reliable data ingestion, and efficient troubleshooting when integrating the tracker with Plaspy. Knowing which transports and features the device supports reduces setup time and helps preserve battery life in long term deployments.
- Ensures devices are pointed to d.plaspy.com or 54.85.159.138 on port 8888 for automatic detection and ingestion.
- Helps choose the appropriate transport mode TCP or UDP based on network conditions and required reliability.
- Guides configuration of reporting intervals and sleep modes to balance battery life and update frequency.
- Makes troubleshooting easier when telemetry is delayed or missing by narrowing down transport or firmware causes.
- Supports planning for fallback reporting such as SMS for critical alerts when cellular data is constrained.
Why Use Plaspy with This Protocol
Using the NR200 with Plaspy gives organizations a streamlined way to bring compact, battery powered trackers into a centralized monitoring and alerting platform. Plaspy’s shared endpoint and automatic protocol detection simplify deployments so NR200 units can be added without per device protocol selection, while the platform presents location, alerts, and history in a unified view.
If you want to learn more about Plaspy and how it integrates with devices like the Noran NR200 visit https://www.plaspy.com. For the most current device specific protocol details, firmware notes, and implementation guidance refer to the official Noran resources at http://www.norantracker.com/ as device behavior and manufacturer documentation can change over time.
Tracker Communication
Looking for a platform that works with compatible protocols
Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.