Skip to main content

TopTen - TK510 Protocol

This page describes the public protocol context for using the TopTen TK510 tracker with the Plaspy platform. It focuses on how the device exchanges tracking and event data with Plaspy in general terms so integrators, fleet managers, and technical users can understand what to configure and expect when connecting a TK510 to Plaspy.

Plaspy uses a shared connection endpoint and consistent server settings for supported devices and automatically detects the tracker reporting protocol when the device is correctly pointed to Plaspy. Exact protocol behavior and available features for a TK510 can vary with firmware version, hardware revision, and manufacturer implementation, so verify device specific behavior against the official manufacturer documentation when needed.

Protocol Overview​

The tracker communication protocol defines how the TK510 reports position, status, alarms, and auxiliary inputs to a remote server such as Plaspy and how control commands or configuration responses are exchanged. For integration with Plaspy the protocol's public role is to reliably deliver location and event data in a way the platform can interpret for mapping, alerts, and reporting.

  • Enables the TK510 to send periodic and on demand location updates including latitude longitude and movement information
  • Carries event notifications such as overspeed geofence movement and SOS triggers to the server
  • Provides identification and device status that lets Plaspy associate incoming data with a specific tracker
  • Supports remote commands and configuration exchanges initiated from platform or via SMS based workflows when applicable
  • Allows the device to deliver telemetry useful for fleet management such as ignition state odometer and sensor inputs

How Plaspy Detects the Protocol​

Plaspy receives device traffic at a shared endpoint and automatically determines the tracker protocol so users normally do not need to pick a protocol manually in the platform. When a TK510 is configured to report to Plaspy using the correct connection target and transport the platform identifies the device type and parses incoming messages for mapping and alerting.

  • Plaspy listens for tracker connections on the same port for all supported devices which simplifies device configuration
  • The Plaspy server domain used for device reporting is d.plaspy.com
  • The Plaspy server public IP is 54.85.159.138 and the listening port is 8888
  • Devices may be configured to use either UDP or TCP transport toward the Plaspy endpoint
  • In most cases a TK510 pointed to the Plaspy endpoint will be detected automatically without additional manual protocol selection

Transport and Connection Context​

Transport and connection settings control how the TK510 sends data to Plaspy and are typically configured on the device or via an SMS command depending on the model and firmware. For Plaspy the connection target and port are standardized so the device only needs to be pointed to the Plaspy endpoint and set to an appropriate transport mode.

  • The device may be configured to use UDP or TCP on port 8888 depending on device support and chosen configuration
  • Devices can be set to report to the Plaspy server domain d.plaspy.com or directly to the IP 54.85.159.138
  • Plaspy uses the same port 8888 for all supported devices to simplify setup and network rules
  • Choose UDP when low latency and simple datagrams are preferred and TCP when ordered reliable delivery is required by the device firmware
  • Ensure any carrier APN or firewall rules allow outbound GPRS TCP or UDP to the Plaspy endpoint on port 8888

Protocol Compatibility Notes​

  • Firmware revisions on the TK510 can change which messages or features are available and how they are formatted
  • Hardware variants and optional modules such as RFID camera or additional sensors may affect the set of reported data
  • Manufacturer configuration commands and default reporting behavior can vary by region and product batch
  • TCP versus UDP selection can affect delivery behavior and should match what the device firmware expects
  • Confirm device IMEI and reporting settings are correctly pointed to d.plaspy.com or 54.85.159.138 on port 8888 before troubleshooting parsing or appearance in Plaspy
  • Validate compatibility against official TopTen documentation for device specific command sets and feature support

Why Protocol Understanding Matters​

Knowing how the device protocol works in general helps administrators and integrators set up TK510 units reliably on Plaspy and resolve communication issues faster. Even when Plaspy automatically detects protocols, practical knowledge of reporting modes and transport behavior helps with network configuration and field troubleshooting.

  • Ensures correct transport selection and server target so devices arrive on the Plaspy endpoint
  • Helps interpret device behavior when updates are missing delayed or contain unexpected fields
  • Aids in debugging GPS fix quality power and sensor reporting by correlating device features to reported fields
  • Reduces setup time by confirming which firmware features must be enabled for required fleet reports
  • Facilitates coordinated testing with carrier networks firewall teams and field technicians

Why Use Plaspy with This Protocol​

Using the TopTen TK510 with Plaspy gives organizations a practical way to collect location and event data from vehicles and convert that stream into maps alerts and fleet reports. Plaspy’s automatic protocol detection and standardized server settings reduce configuration complexity so you can focus on operational use cases such as routing driver identification geofencing and exception reporting.

If you want to learn more about how Plaspy works with device protocols and fleet tracking, visit https://www.plaspy.com. For the most current and device specific protocol and firmware details consult the manufacturer documentation at http://www.t10.cn since protocol support and implementation details can change over time.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy