Skip to main content

TrackerKing - DK19 Protocol

This page summarizes the public protocol context for using the TrackerKing DK19 with Plaspy. It describes how the DK19 typically communicates telemetry and events to the Plaspy platform, and the connection settings commonly used for integration. The aim is to help technical integrators and fleet managers understand the communication context without exposing private implementation details.

Plaspy uses shared connection settings across supported devices and automatically detects the tracker protocol when the device reports to the platform. Exact protocol behavior and available features can vary by firmware version, hardware revision, and manufacturer implementation, so this page focuses on practical, public information and integration guidance based on the DK19 specification and common tracking protocols supported by the device.

Protocol Overview​

The DK19 supports industry standard tracking protocols and reports telemetry in a way that allows Plaspy to present location, status, and alarm data for real time monitoring and historical playback. The protocol layer on the device is responsible for identifying the unit to the server, packaging GNSS and sensor data, and signaling defined events such as ignition changes or security alarms.

  • Acts as the vehicle to platform bridge, sending GNSS, ignition, alarm, and mileage data to Plaspy for display and processing.
  • Identifies the device to the Plaspy endpoint so the platform can associate incoming reports with the correct asset.
  • Encodes status and event information used by Plaspy to trigger alerts, reports, and automation rules.
  • Supports multiple common tracking formats for easier onboarding to platforms such as Plaspy, including GT06, CRX3, JT808 and Tianqin as implemented by the device.
  • Enables retransmission or stored reporting in blind areas so Plaspy can reconstruct periods of poor connectivity.

How Plaspy Detects the Protocol​

Plaspy is designed to accept device reports at a single shared endpoint and port and to detect the incoming protocol automatically. When a TrackerKing DK19 is configured to report to Plaspy, the platform uses the network endpoint and the content of the first reports to associate the feed with the appropriate parsing logic so manual protocol selection is usually unnecessary.

  • Devices should be configured to send reports to d.plaspy.com or to the Plaspy server IP 54.85.159.138.
  • Plaspy listens on port 8888 for tracker connections and expects devices to use that port for reporting.
  • Plaspy supports automatic protocol detection so users generally do not need to pick a protocol inside the platform after the device is correctly pointed to the Plaspy endpoint.
  • Ensure the DK19 is sending the device identifier and basic status fields required by the supported protocol so Plaspy can match incoming reports to the device record.
  • If a device is not appearing, verify the device network settings and that UDP or TCP transport is selected correctly on the DK19.

Transport and Connection Context​

The DK19 supports cellular transport options and can be configured to report to Plaspy using either UDP or TCP depending on carrier and device settings. Plaspy accepts both transports on the same port, which simplifies configuration across different tracker models.

  • The DK19 may be configured to use UDP or TCP on port 8888 depending on device support and installer preference.
  • Devices can point to the DNS name d.plaspy.com or the server address 54.85.159.138 when configuring the report target.
  • All devices in Plaspy use the same port, so port configuration is consistent across models and simplifies firewall and network planning.
  • Choose the transport that best matches cellular reliability and operator constraints for your region; UDP is common for lower overhead, TCP can provide session continuity.
  • Confirm APN and data settings on the DK19 to ensure the unit can establish a connection to the Plaspy endpoint.

Protocol Compatibility Notes​

  • DK19 firmware may include support for multiple standard protocols; confirm which protocols are enabled on the specific firmware release installed in your unit.
  • Hardware revisions and optional modules such as Cat M or NB IoT variants can affect network behavior and supported transports.
  • Manufacturer configuration tools or default settings may select a particular protocol or transport; validate these against your Plaspy account expectations.
  • Transport selection (UDP vs TCP) can influence behavior during weak coverage and should be validated during field testing.
  • Plaspy’s automatic detection reduces the need for manual protocol assignment, but correct device addressing and identifier fields are required for reliable association.
  • Always validate integration in a controlled environment before deploying to a production fleet, especially when remote control features such as immobilizer commands are planned.

Why Protocol Understanding Matters​

Understanding the DK19 communication protocol and how it interacts with Plaspy helps ensure successful setup, reliable telemetry, and efficient troubleshooting. Knowing what the tracker sends and how Plaspy expects to receive it reduces onboarding friction and improves operational outcomes.

  • Ensures correct device addressing so incoming reports are matched to the right vehicle in Plaspy.
  • Helps diagnose connectivity issues by clarifying whether the device is using UDP or TCP and which endpoint is targeted.
  • Supports accurate alarm and event mapping so features like ignition detection and overspeed alerts behave as expected in Plaspy.
  • Guides firmware and configuration choices that affect reporting frequency, blind area retransmission, and power behavior.
  • Facilitates coordination with manufacturer support when device behavior diverges from expected protocol flows.

Why Use Plaspy with This Protocol​

Using the TrackerKing DK19 with Plaspy provides a practical solution for teams that need continuous vehicle visibility, anti theft response, and fleet telemetry in a single platform. The DK19’s 4G connectivity with fallback to 2G, ignition sensing, and event alarms feed directly into Plaspy for map display, historic routes, and rule driven alerts that improve response and operational oversight.

Plaspy’s shared endpoint model simplifies device onboarding: point the DK19 at d.plaspy.com or 54.85.159.138 on port 8888 using UDP or TCP, and Plaspy will detect the tracker protocol automatically once reports arrive. To learn more about how Plaspy can work with the DK19 and other compatible trackers, visit https://www.plaspy.com. For the most current device specific protocol details and firmware behavior, verify information with the manufacturer at https://trackerking.cn/ as implementations and firmware can change over time.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy