Skip to main content

V-SUN - TLT-1B Protocol

This page covers the public protocol context for using the V-SUN TLT-1B tracker with the Plaspy platform. It summarizes how the device commonly reports position and alert data and how that reporting relates to Plaspy server settings without exposing sensitive implementation specifics.

Plaspy uses a shared connection endpoint and common port across supported devices and automatically detects the tracker protocol when the device is configured to report to the Plaspy endpoint. Exact protocol behavior can vary by firmware version, hardware revision, and manufacturer implementation, so this page focuses on high level, non sensitive protocol context and practical integration considerations.

Protocol Overview​

The tracker reporting protocol defines how the TLT-1B sends location, alarm, and status information from the field to a remote server such as Plaspy. For the TLT-1B this can include SMS based reporting and GPRS TCP reporting of latitude and longitude, time, and event flags that represent SOS or power related conditions.

  • Transmits GNSS position and basic device status to a remote server for real time tracking and historical trajectories.
  • Supports SMS commands and GPRS TCP reporting as common transport options for location and alarm messages.
  • Allows event reporting such as SOS presses and power cut indicators to be delivered to a monitoring platform.
  • Enables device identification so the server can associate incoming reports with a specific tracker instance.
  • Provides the data elements Plaspy needs to display location, history, and alerts without exposing packet formats.

How Plaspy Detects the Protocol​

Plaspy accepts incoming reports on a single shared endpoint and automatically determines the tracker protocol when a device is configured to send data to Plaspy. In most cases you do not need to pick a protocol manually inside Plaspy if the device is correctly pointed at the Plaspy endpoint.

  • Plaspy server domain is d.plaspy.com and the Plaspy server IP is 54.85.159.138 for direct DNS or IP configuration.
  • Plaspy uses the same port for all supported devices and the configured port is 8888.
  • Devices may be configured to report via TCP or UDP to the Plaspy endpoint and Plaspy handles both transports.
  • When the tracker reports using the shared endpoint and port, Plaspy will automatically detect and process the protocol format it receives.
  • Proper server address and transport selection on the device side is usually the only configuration required to allow automatic detection.

Transport and Connection Context​

Connection context describes how the TLT-1B reaches Plaspy over a cellular network. The device supports SMS for basic reporting and GPRS TCP for continuous reporting to a remote server. Transport selection is often a configuration option on the tracker or within the SIM carrier settings.

  • The device may be configured using UDP or TCP on port 8888 depending on device support and chosen configuration.
  • Devices can point to d.plaspy.com or to the numeric server address 54.85.159.138 when direct IP is preferred.
  • All devices in Plaspy use the same port which simplifies fleet wide configuration and reduces per device setup steps.
  • GPRS TCP is commonly used for real time uploads while SMS remains useful for simple queries and emergency notifications.
  • Network reliability, APN settings, and SIM provisioning can affect whether the device uses TCP or UDP successfully.

Protocol Compatibility Notes​

  • Firmware versions may alter which events are reported or how frequently location updates are sent.
  • Hardware revisions can introduce differences in supported transports or available features such as power monitoring and SOS behavior.
  • Manufacturer configuration commands and default server settings vary; always confirm device-side server settings before testing.
  • Transport selection between TCP and UDP can affect delivery semantics and may be constrained by mobile networks or APN restrictions.
  • Plaspy automatic detection reduces the need for manual protocol selection but correct endpoint and transport on the device are required.
  • Validate compatibility against the official V-SUN documentation for model specific instructions and firmware notes.

Why Protocol Understanding Matters​

Understanding the high level communication protocol helps ensure the tracker is configured to reliably report to Plaspy and enables faster troubleshooting when messages are missing or events are not appearing as expected.

  • Ensures the device is pointed at d.plaspy.com or 54.85.159.138 and using port 8888 so Plaspy can receive reports.
  • Helps identify whether SMS, GPRS TCP, or a transport mismatch is causing missing updates.
  • Guides firmware selection and configuration choices that affect reporting frequency and alarm handling.
  • Improves ability to interpret device behavior such as SOS events, power cut alerts, and movement reporting.
  • Reduces integration time by focusing on server address, transport, and APN details rather than low level packet layout.

Why Use Plaspy with This Protocol​

Using the V-SUN TLT-1B with Plaspy provides organizations with a reliable path for collecting position and alert data from vehicles and assets. Plaspy's shared endpoint approach and automatic protocol detection let fleets bring heterogeneous devices online with a minimal per unit configuration burden.

If you want to learn more about how Plaspy supports device integration and fleet management, please visit https://www.plaspy.com. Keep in mind that protocol support, firmware behavior, and manufacturer device details can change over time, so verify the latest TLT-1B specific documentation and firmware notes at the official V-SUN website http://www.v-sun.cc/ for the most current information.

Tracker Communication

Looking for a platform that works with compatible protocols

Plaspy helps receive data from supported trackers and organize monitoring, visibility, and reporting in one place.

Learn more about Plaspy